Honeywell Control Systems Ltd

United Kingdom

See product on honeywell.com/sensing

RPNS070DD1A21X RPN Series, single output style, 70° (±35°) operating range, 4 mA (left), 20 mA (right) output signal, 8 Vdc to 30 Vdc supply voltage, ±1° linearity, AMP Superseal 282087-1 termination, flat shaft, oval mounting hole, IP67 Actual product appearance may vary. Features Solid-state Hall effect technology Eight operating ranges, up to 360° Variety of supply voltages and output configurations Rugged sealed package with integral connector IP67 or greater Integrated reverse polarity, short circuit and EMC protection Single or dual output

versions available Industry-standard termination Potential Applications Position and movement detection of pedals, throttle, gear shift, levers, linkages, suspension and hitches in: Trucks Off road vehicles Industrial vehicles and equipment Construction vehicles and equipment Agricultural vehicles and equipment Cranes Description RPN Series Rotary Position Sensors use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator shaft over a set operating range. Rotation of the actuator shaft changes the IC’s position relative to the magnets. The resulting flux density change is converted to a linear output. The IC, together with conditioning and protection circuitry, and two permanent magnets, is sealed in a rugged package of IP67 or greater for durability in most harsh environments. Solid-state Hall-effect technology provides non-contact operation, long service life, low torque actuation and reduced wear-out mechanisms. Eight operating ranges (50°, 60°, 70°, 90°, 120°, 180°, 270° and 360°) are tolerant to over travel and allow use in most common applications. Five different supply voltages and eight different output configurations, in either mA or Vdc, improve compatibility with a variety of control systems. Two versions provide dual outputs for use where an additional output may be desired where redundancy and backup is needed. Another potential application includes using one output for an indicator and the second for the control system. Lever versions are available. The easy-to-mount sensor has a mounting flange with two round or oval mounting holes. All products have AMP or Deutsch receptacles. Product Specifications Output Style single Operating Range 70° (±35°) Output Signal 4 mA (left), 20 mA (right) Output Signal Delay 3 ms approx. Supply Voltage 8 Vdc to 30 Vdc Current Consumption 20 mA max. Accuracy ±1.6% Linearity ±1° Life 30000000 Reverse Polarity Protection Yes EMC 200 V/m ISO 11452-3 Termination AMP Superseal 282087-1 Shaft Shape flat Mounting Hole oval (4,2 mm [0.17]) Lever none Operating Temperature -40 °C to 125 °C [-40 °F to 257 °F] Storage Temperature -40 °C to 125 °C [-40 °F to 257 °F] Sealing IP67 Availability Global Series Name RPN
Save this product