Honeywell Control Systems Ltd

United Kingdom

See product on honeywell.com/sensing

RPNR050DMEC3A21X RPN Series, redundant (dual) output style, 50° (±25°) operating range, channel 1: 4 mA (left), 20 mA (right); channel 2: 0.5 Vdc (left), 4.75 Vdc (right) output signal, channel 1: 8.5 Vdc; channel 2: 5 Vdc supply voltage, ±0.35° linearity, AMP 1-1419168-1 termination, flat shaft, oval mounting hole, IP69K Actual product appearance may vary. Features Solid-state Hall effect technology Eight operating ranges, up to 360° Variety of supply voltages and output configurations Rugged sealed package with integral connector IP67 or greater

Integrated reverse polarity, short circuit and EMC protection Single or dual output versions available Industry-standard termination Potential Applications Position and movement detection of pedals, throttle, gear shift, levers, linkages, suspension and hitches in: Trucks Off road vehicles Industrial vehicles and equipment Construction vehicles and equipment Agricultural vehicles and equipment Cranes Description RPN Series Rotary Position Sensors use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator shaft over a set operating range. Rotation of the actuator shaft changes the IC’s position relative to the magnets. The resulting flux density change is converted to a linear output. The IC, together with conditioning and protection circuitry, and two permanent magnets, is sealed in a rugged package of IP67 or greater for durability in most harsh environments. Solid-state Hall-effect technology provides non-contact operation, long service life, low torque actuation and reduced wear-out mechanisms. Eight operating ranges (50°, 60°, 70°, 90°, 120°, 180°, 270° and 360°) are tolerant to over travel and allow use in most common applications. Five different supply voltages and eight different output configurations, in either mA or Vdc, improve compatibility with a variety of control systems. Two versions provide dual outputs for use where an additional output may be desired where redundancy and backup is needed. Another potential application includes using one output for an indicator and the second for the control system. Lever versions are available. The easy-to-mount sensor has a mounting flange with two round or oval mounting holes. All products have AMP or Deutsch receptacles. Product Specifications Output Style redundant (dual) Operating Range 50° (±25°) Output Signal Channel 1: 4 mA (left), 20 mA (right); Channel 2: 0.5 Vdc (left), 4.75 Vdc (right) Output Signal Delay 3 ms approx. Supply Voltage Channel 1: 8.5 Vdc; Channel 2: 5 Vdc Current Consumption 20 mA max. Accuracy ±1.6% Linearity ±0.35° Life 30000000 Reverse Polarity Protection Yes EMC 200 V/m ISO 11452-3 Termination AMP 1-1419168-1 Shaft Shape flat Mounting Hole oval (4,2 mm [0.17]) Lever none Operating Temperature -40 °C to 125 °C [-40 °F to 257 °F] Storage Temperature -40 °C to 125 °C [-40 °F to 257 °F] Sealing IP69K Availability Global Series Name RPN
Save this product