Selection of 33 products among
33
PUMP - NIBE PKM 10/20
• Developed for the use of the NIBE FIGHTER 1140 and 1240
• Controled by the microprocessor by the heatpump
(no external control nessesary)
• Heat exchanger in the System (no brine in the Heating
system)
• Free cooling and hot water at the same time
• Heating and cooling switch in one unit
• No brine in the heating system
• Free cooling with a minimum use of a electrical energy
• Environmental friendly
• Easy to install
• Low running costs
• Good value complete system
About PKM
The passive cooling module (PKM) consists of a compact unit
with integrated separation heat exchanger, circulation pump as
well as regulating valves.
PKM makes the passive cooling possible for a building over a
suitable surface heating (floor, winding or ceiling heating) or
a fancoils. The brine water circle is running separately from the
cool and/or heating circle. PKM can cool if necessary and at the
same time and prepare warm industrial water.
The integrated circulation pump is only used if the free cooling is
used. There to the electrical cooling energy needed, only the
driving power of the circulation pumps. Therefore the system
works with high energy-saving and environmental friendly. For
free / passive cooling by the use of brine or groundwater systems
is the suitable warming and/or cooling source.
The brine can feed the energy entry into the soil and provides in
such a way for an optimal energy use in the cooling.
The NIBE system program offers extensive combination options
matching different demands on energy savings solutions -
here only some:
>>>
View the product on encompas.co.uk
Encompas Limited
PUMP - NIBE FIGHTER 1240
The FIGHTER 1240 has been equipped with a
control panel which offers plenty of functions.
The novelties are:
• Larger control panel with clear symbols
• The easily understandable control simplifies
the
control and operation of the heat pump
• Double heat curves
• Programmable for climate and cooling control
• Clock
• Timer for temperature control
• Timer for hot water function
• Prepared for GSM- and Internet-integration
• Control unit for swimming pools
• Alarm logbook
• Choice of language
• Soft start relays
• Prepared for the configuration of four different
installation systems
• Display of the refrigerant temperature
NIBE FIGHTER 1240 is a complete heat pump unit for heating
single-family houses.
This type of unit is available in seven different variants with output
levels from 5 to 12 kW.
The efficiency of the FIGHTER 1240 is high, thanks to a highly
efficient compressor in a well-dimensioned refrigerant circuit.
This results in the considerable coefficient of performance (COP)
of 5,0 at 0 °C incoming cooling medium temperature and 35 °C
outgoing heating medium temperature (including circulation
pumps).
The FIGHTER 1240 is designed in such a manner, that the compressor
and the refrigerant unit is housed in a separate enclosure
for easier servicing. As a result the compressor features double
sound-proofing, resulting in very low noise levels. Both the circulation
pumps are built-in and the heat source circuit can be connected
to the left or right-hand side of the unit. Dirt filters are
also included in the contents of delivery.
The FIGHTER 1240 is fitted with a 160-litre (available in different
corrosion protection), double-jacket hot water heater, which is
insulated with polyurethane foam to minimise heat loss. The
built-in three-stage cartridge heater can be switched on automatically
if needed.
The unit can be connected to a low-temperature distribution
system such as radiators, convectors or underfloor heating.
The FIGHTER 1240 is fitted with a microprocessor to ensure optimal
and safe operation. Clear information about status, running
time and all essential temperatures in the heat pump are presented
on a two-line LCD display. This means that external plant
thermometers are not necessary.
The complete FIGHTER 1240 is enclosed in a robust frame and
thanks to sturdy outer panels and effective sound insulation the
unit is so quiet, that it does not have a negative effect on living
comfort. To ensure simple installation and easy service most
panels can easily be removed.
It is possible to cool via the heat source on hot summer day.
>>>
View the product on encompas.co.uk
Encompas Limited
AIR SOURCE HEAT PUMPS
Air source heat pumps
An air source heat pump extracts heat from the air, even when the temperature is as low as -20oC. In the UK average winter temperatures are around 5oC. In an air source
heat pump system there are three independent circuits: the outside air, the refrigerant circuit and the building’s water based heat distribution system. They are connected via two heat exchangers within the heat pump which transfers the low grade heat from the air into useable heat to heat the building. Air source heat pumps require a buffer tank as part of the installation. Most have a defrost cycle. They are not as efficient as a ground source heat pump, but benefit from lower installation costs. Some models of air source heat pump can also operate in reverse mode to provide active cooling.
An air source heat pump can be positioned inside the property on a corner wall in say a garage or utility room. This model includes an integrated buffer tank and it can provide heat for an underfloor or radiator system (at up to 58oC) as well as providing most of the heat for domestic hot water purposes. Matching hot water cylinders are available.
Air source heat pumps can also be situated externally. They can produce heating water flow up to 55oC. The thermal output of air source heat pumps extends to 11kW on single phase electricity or 28kW where three phase power is available.
>>>
View the product on geowarmth.co.uk
Geowarmth Heat Pumps
PUMP - NIBE FIGHTER 1330
Advanced Heat Pump
for large residential and
commercial installations
NIBE FIGHTER 1330 is a heat pump for heating larger buildings
such as multi-family houses and large scale industrial plants.
Soil,
brine or ground water can be used as an energy source. FIGHTER
1330 is a flexible product with advanced control equipment
which offers a multitude of system solutions. FIGHTER 1330 can
run at two different flow temperatures – if necessary with double
heat curves. It is furthermore prepared for controlling an oilfuelled
or electric boiler. This heat pump can be controlled in a
heating system as either a “master” or “slave”.
FIGHTER 1330 is manufactured in three versions; these feature
an output of 23, 31 and 39 kW.
Due to the two highly effective scroll compressors in a refrigerant
circuit of suitable size, the FIGHTER 1330 achieves a high efficiency.
With a heat factor (COP) of at least 4.3 * with an incoming cooling
medium temperature of 0° C and an outgoing heating medium
temperature of 35°C, the unit is an effective cost saver.
The maximum flow temperature is 65°C with compressors only.
The heat pump consists of two units which contain less than
3 kg refrigerant per unit. The two compressors, which are
activated when they are needed, achieve a higher output control
by increased operation intervals, which leads to less wear and
increased operational safety.
FIGHTER 1330 enables simultaneous production of heating water
and hot water. The production of hot water is prioritised by the
activation of one or both compressors.
FIGHTER 1330 is constructed in such a manner, that the compressors
and refrigerant circuits are encased in separate units,
which ensures safe servicing. This double sound-proofing of the
compressors results in very low noise levels. Circulation pumps
and flexible hoses are fitted at the factory. Cooling medium and
heating circuits are connected on the back of the device. Dirt filters
are included in the delivery.
The FIGHTER 1330 is fitted with a microprocessor to ensure optimal
and safe operation. Clear information on condition, operation
time and all temperatures can be read off from the LCD display.
External plant thermometers are therefore not necessary.
FIGHTER 1330 features a robust frame with a strong outer
casing. Effective sound-proofing guarantees low noise levels and
therefore increased living comfort. Detachable front and side
panels make the installation and servicing easier.
Nine FIGHTER 1330 can be connected together via a control unit
to achieve an output of up to 360 kW.
It is also possible to cool via brine on hot summer days.
FIGHTER 1330 can be installed in different ways (see page 14
and www.nibe.com).
Necessary accessories would be for example the room sensor
“RG 10” or the equipment for hot water control “VST 11”, the
temperature signal distributor “TSF 10” and other equipment.
>>>
View the product on encompas.co.uk
Encompas Limited
PUMP - NIBE FIGHTER 1140
FIGHTER 1140 has been equipped with a control
panel which offers plenty of functions.
The novelties are:
• Large control panel with clear symbols
• The easily understandable control simplifies
the
control and operation of the heat pump
• Double heat curves
• Programmable for climate and cooling control
• Clock
• Timer for temperature control
• Timer for hot water function
• Prepared for GSM- and Internet-integration
• Control unit for swimming pools
• Alarm logbook
• Choice of language
• Soft start relays
• Prepared for the configuration of four different
installation systems
• Display of the refrigerant temperature
NIBE FIGHTER 1140 is a heat pump for heating single and multifamily
houses and industrial buildings. The FIGHTER 1140 is a
versatile product with advanced control equipment. The control
is also prepared for bivalent heating mode in combination with
an oil or gas-fired boiler. This heat pump type is available in the
output range of 5 to 17 kW in nine versions. A cartridge heater
is fitted in the factory installed electrical cartridge with 3 x 3 kW
for 3 x 400 V and 3 x 2 kW for 230V.
The efficiency of the FIGHTER 1140 is high, thanks to a highly
efficient compressor in a well-dimensioned refrigerant circuit.
This results in the considerable coefficient of performance (COP)
of 5,0 at 0°C incoming cooling medium temperature and 35°C
outgoing heating medium temperature (excluding circulation
pumps).
The FIGHTER 1140 is designed with the compressor and the refrigerant
unit housed in a separate enclosure for easier servicing.
As a result the compressor features double sound-proofing, leading
to very low noise levels. Circulation pumps and flexible
hoses are already built-in. The heat source and heating circuits
are connected at the top of the unit for ease of installation. Dirt
filters are also included in the contents of delivery.
The unit can be connected to a low-temperature distribution
system such as radiators, convectors or underfloor heating/wall
mounted heating.
The FIGHTER 1140 is fitted with a microprocessor to ensure optimal
and safe operation. Clear information about status, running
time and all essential temperatures in the heat pump is presented
on a two-line LCD display. This means that external plant thermometers
are not necessary.
The complete FIGHTER 1140 is enclosed in a robust frame and
thanks to sturdy outer panels and effective sound insulation the
unit is so quiet, that it does not have a negative effect on living
comfort. To ensure simple installation and easy service most
panels can easily be removed.
The following docking options are available:
• Direct connection to a low-temperature radiator/underfloor
heating system. The flow temperature is automatically
matched to the actual outside temperature. Hot water can
be heated in a separate water heater (type NIBE VPA) via a
changeover valve.
• Docking to an existing oil/gas/wood-fuelled boiler or
accumulator tank with water heater.
FIGHTER 1140 can be installed in different ways (see page 6 and
www.nibe.com).
The temperature of the heating system must be taken into
account, because the upper temperature limit of heat pumps is
lower than that of for instance oil or gas-fuelled boilers.
Electrical cartridge (1-phase or 3-phase) is installed in the heat
pump. Room sensors, hot water control and add-on units are
available as accessories.
It is possible to cool via the heat source on warm summer days
(free cooling).
>>>
View the product on encompas.co.uk
Encompas Limited
