Guidance and cable protection: suppliers, wholesalers and manufacturers on Hellopro
Search   


Guidance and cable protection :

30 products
Select the category
    Selection of 31 products among 30
    CABLE TRANSFER SET - THROWMASTER 102A

    CABLE TRANSFER SET - THROWMASTER 102A
    The Throwmaster Cable Test Set Model 102A is a portable, battery powered instrument for field testing and transfer of metallic telephone cable pairs. It is normally used by technicians as their primary test set. All functions normally associated with the testing of wire pairs and transfer service may be accomplished using the Throwmaster 102A. Features: Accurately measures opens: (up to 100,000 feet) as well as voltage and resistance. Supplies talk battery: Using a unique signaling function, talk battery is supplied and communication established. Handsets or headsets may be used at both ends. Tests spare pairs: Utilizing the same functions as a field test board, tests may be made for shorts, grounds, crosses, opens, splits and high resistance faults. Tests Working Lines: Working lines may be tested for status of busy, idle, reversed, or special voltage Sends simplex 577 Hz Tone: For pair identification which is silent to subscribers. Tone Buzz Around: Normally used prior to pair transfers, the Buzz feature allows technicians to test old and new pairs simultaneously for defects and continuity. >>>
    View the product on jmwlimited.co.uk JMW Limited
    CABLE CARRIERS - KE

    CABLE CARRIERS - KE
    KE – Cable carriers with variable chain widthsAvailable in 8 or 16 mm section widths Standard widths can be delivered ex-stock Can be opened quickly on the inside and the outside for cable laying Solid plastic Extremely robust owing to strong sideband construction Enclosed stroke system not sensitive to dirt/contamination Transmission of forces (tensile and shearing forces) over a large surface area via the optimum link design – according to the “life extending 2 disc principle“ Standard universal mounting brackets (UMBs) suitable for any assembly situation Optionally available with different strain relief systems TÜV design approved in accordance with 2PfG 1036/10.97 >>>
    View the product on metool.com Metool Products Limited
    CABLE TRACING - TONE PROBE 600J

    CABLE TRACING - TONE PROBE 600J
    The 600J tone generator provides transformer coupled (Electromagnetic) or capacitor coupled (Electrostatic) connection to the wire pair or cable under test. Either configuration can be used to locate a wire pair or cable. The choice of output connection is of particular benefit when the pair is identified and testing back to the tone generator is required. Features: 1kHz sine wave output. 4 tone signatures. Continuity test. High tone output. Battery-low warning. Transformer output. Capacitor output. One-button control. Water and dust proof. 3 year warranty. >>>
    View the product on jmwlimited.co.uk JMW Limited
    CABLE CARRIERS - MT

    CABLE CARRIERS - MT
    MT – Tubes with variable chain widthsDisponible dans des sections de largeur de 1, 8 ou 16 millimètres Peut être ouvert rapidement sur l'intérieur et l'extérieur pour la pose de câble Plastique plein ou en combination avec le système en aluminium de couverture Système inclus de course non sensible à la saleté/à contamination Transmission des forces (de tension et des forces de cisaillement) au-dessus d'une grande superficie par l'intermédiaire de la conception optima de lien - selon la « vie prolongeant le principe de 2 disques « Supports universels de norme (UMBs), appropriés à toute situation d'assemblée Manières nombreuses de separa >>>
    View the product on metool.com Metool Products Limited
    CABLE CARRIERS - PROFILE

    CABLE CARRIERS - PROFILE
    PROFILE – Cable carriers with extruded plastic profile barsOptimal for short travel lengths and high travel speeds Low vibration and quiet operation Very long service life Tested over several million cycles Clean-room compatibility owing to low-wear construction and the concomitant minimal particle emission Fast cable laying simply by pressing the cables in – no threading through is necessary Standard modules for cable diameters from 6 mm to 30 mm Special modules for ribbon cables from 44 mm to 65 mm in width Special module for cable diameter up to 5 mm and ribbon cables up to 14 mm in width >>>
    View the product on metool.com Metool Products Limited
    CABLE ENTRY SYSTEM, TYPE KDL/E 16

    CABLE ENTRY SYSTEM, TYPE KDL/E 16
    The KDL/E represents the 3rd generation of Murrplastik cable entry system. Even quicker mounting of pre-assembled cables. Snap in, meaning screwing on is no longer absolutely necessary. Catch hook for 1.5 - 2.0 mm plate thickness included with delivery, additional catch hooks for up to 4.1mm plate thickness available. Fits standard cut-outs for connectors (e.g. Harting, Wieland and Rittal). Simple realization of EMV solution with discharge plate >>>
    View the product on murrplastik.de MURRPLASTIK SYSTEMTECHNIK
    CABLE CARRIERS FOR 3D MOVEMENTS - ROBOTRAX

    CABLE CARRIERS FOR 3D MOVEMENTS - ROBOTRAX
    ROBOTRAX – Cable carrier for 3D movementsPour les mouvements tridimensionnels Ouvrez la conception Câble rapide s'étendant par enfoncer simple des câbles - aucun filetage à travers n'est inspection simple nécessaire de tous les câbles Peut être déployé sur des robots pour des mouvements de pivoter et de de rotation Le même système pour des pieds et des bras de robot Système optimum pendant la longue durée de vie des câbles : Le rayon de cintrage minimum peut être maintenu Les câbles sont proprement isolés dans trois chambres séparées Plastique spécial pendant la longue durée de vie >>>
    View the product on metool.com Metool Products Limited
    CABLE DRAG CHAIN SYSTEMS

    CABLE DRAG CHAIN SYSTEMS
    Our system offers you a complete system solution for many fields of operations, such as cable drag chains, guide moulds, leads, strain relief, and assembling. Our chains have proven their quality and longevity under extreme constant loads and environmental influences. Our chains systems are quickly deliver-able at reasonable prices. If you have any further questions as to special fields of operations, please do not hesitate to contact our engineers for detailed information. >>>
    View the product on murrplastik.de MURRPLASTIK SYSTEMTECHNIK
    CABLE CARRIERS - SERIE MASTER L

    CABLE CARRIERS - SERIE MASTER L
    MASTER L-Serie – Cable carriers with variable chain widthsLightweight design with low intrinsic weight Standard widths available ex-stock; individual widths in 1 mm sections on request Very quiet owing to internal damping system for pre-tension and radius strokes Favorable ratio of inner to outer width Standard bend radii, application-specific intermediate radii upon request Damper system integrated in the chain links to reduce noise emissions Variable pre-tensioning for the most varied applications is possible Can be opened quickly on the inside and the outside for cable laying Transmission of forces (tensile and shearing forces) over a large surface areavia the optimum link design – according to the “life extending 2 disc principle“ Many possibilities for internal subdivision A choice of up to 3 universal mounting brackets (UMBs) – all three types can be screwed on both from above, below or also as a flange Optionally available with different strain relief systems >>>
    View the product on metool.com Metool Products Limited
    STEEL CABLE CARRIERS - TYPES – S

    STEEL CABLE CARRIERS - TYPES – S
    The solution for extreme applications.Cable carriers with chainbands made of galvanized steel or of high-grade stainless steelMaximum unsupported lengths Available in 1 mm section widths to fit your application exactly Aluminium or steel stay systems Completely covered types with aluminium cover system Heat-resistant Multi-band chains are available for larger widthsTypes – S: galvanized steel chainbands >>>
    View the product on metool.com Metool Products Limited
    CABLE CARRIERS WITH VARIABLE CHAIN WIDTHS - KC

    CABLE CARRIERS WITH VARIABLE CHAIN WIDTHS - KC
    Available in 1 mm section widths Standard widths can be delivered ex-stock Can be opened quickly on the inside and the outside for cable laying Plastic in combination with aluminium stays Extremely robust owing to strong sideband construction Enclosed stroke system not sensitive to dirt/contamination Transmission of forces (tensile and shearing forces) over a large surface area via the optimum link design – according to the “life extending 2 disc principle“ Standard universal mounting brackets (UMBs) suitable for any assembly situation Optionally available with different strain relief systems TÜV design approved in accordance with 2PfG 1036/10.97 >>>
    View the product on metool.com Metool Products Limited
    CABLE CARRIERS WITH EXTRUDED PLASTIC PROFILE BARS - PROTUM

    CABLE CARRIERS WITH EXTRUDED PLASTIC PROFILE BARS - PROTUM
    Solid plastic Very long life – no hinges and hence no hinge wear Small, light cable carrier for unsupported applications Very good ratio of useful space to outer dimensions Low vibration and quiet operation Optimal for short travel lengths and high travel speeds Gentle on the cables, since there is almost no polygon effect Fast cable laying simply by pressing the cables in –no threading through is necessary >>>
    View the product on metool.com Metool Products Limited
    DIN RAILMOUNT CLAMP

    DIN RAILMOUNT CLAMP
    DIN railmount clamp for 7-11mm dia cable Attributes Attribute Type Attribute Value Type Mounting Clamp Fixing DIN Rail Colour White Cable Diameter Range 7 ? 11mm Material Stainless Steel Overview DIN Rail Mount Cable Clamps Designed for fast and effective fixing of screened wires and cables. Since the introduction of the EMC directive screened cables have become an essential element of electrical systems. Until now, however, installers have had to make do with fiddly fixing procedures, with the increased risk of damaging the screen. Available in two sizes, the cable clamp incorporates a number of advanced features to provide easier installation and more effective performance. These include a stainless steel contact spring to avoid damage to the screen, high corrosion resistance, potential balance via the Busbar fixing rail and an insulated rail mounting support. Note Clamp uses a special type of C rail not currently stocked by RS Components. However, for supplier details, please contact the RS Technical Helpline. >>>
    View the product on uk.rs-online.com/web/ RS Components Ltd
    PIPESLICE - 28MM FIXED

    PIPESLICE - 28MM FIXED
    Product code: TPSS28 Application: Copper tube cutting tool Construction: Polycarbonate body and various grades of steel for internal components # Tailor-made for professional and DIY use # Cuts clean through copper pipes, avoiding pipe damage and external de-burring # Ideal for confined spaces - especially where there is minimal pipe to wall clearance # Replacement blades available >>>
    View the product on kopex.co.uk Kopex International
    DIGITAL MANOMETER - MANOMETER 1C

    DIGITAL MANOMETER - MANOMETER 1C
    The Manometer 1C digital manometer is ideal for making accurate pressure readings of air filled telephone cables. Based on a piezo-resistive sensor complete with its own laser trimmed temperature compensation, the Manometer 1C provides excellence in pressure monitoring. Features: Large liquid crystal display. Rugged construction. Simple operation. Self contained. Supplied complete with: PVC connecting tube. Quick connect chuck. Calibration certificate. >>>
    View the product on jmwlimited.co.uk JMW Limited
    LABEL SLEEVES KT

    LABEL SLEEVES KT
    Label sleeves KT (standard sleeve) High-quality, fully transparent label sleeves for labelling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS 4... or DM 4... Six versions are available covering the entire core cross section range from 0.22 mm² to 120 mm². The sleeves come in different lengths. The special KT 2/20x9 or KT 2/35x9 sleeves are for multi-line single wire labelling. They hold the ACS labels type KSO or DM 9... >>>
    View the product on murrplastik.de MURRPLASTIK SYSTEMTECHNIK
    STRAIGHT CONDUIT FITTING - TYPE VG

    STRAIGHT CONDUIT FITTING - TYPE VG
    Type VG (plastic thread) Straight conduit fitting with plastic thread. insert conduit screw upper part tight ready Reliable assembly because fitting is supplied pre-assembled. No additional parts required Resistant to vibration due to lockable cap nut Clamping around entire circumference, ensuring maximum tear-out strength High tightness corresponding to IP 68 to 6 bar (IP69K) without additional parts Simple check that the conduit is assembled correctly >>>
    View the product on murrplastik.de MURRPLASTIK SYSTEMTECHNIK




      Search    
     
     
     
    Search
    See all of the sector's products : Electricity/Electronics