Groupes et climatiseurs spéciaux (translation in progress): suppliers, wholesalers and manufacturers on Hellopro
Search   


Groupes et climatiseurs spéciaux (translation in progress) :

41 products
Select the category
Selection of 40 products among 41
HACIENDA INVERTER SPLIT AIR CONDITIONERS

HACIENDA INVERTER SPLIT AIR CONDITIONERS
This range of Hacienda Inverter split air conditioners is ideal for use around the home or office as it provides both cooling and heating. Simply set the unit to your desired temperature and it will automatically adjust its output to achieve it. The Inverter technology in these units will reduce the amount of energy and improve climate control. Unlike regular air conditioners an Inverter model varies its compressor speed to match the cooling or heating load and therefore consumes only the power necessary to match the exact requirement of the room. When an inverter driven air conditioner is operating at partial load the energy efficiency of the system is significantly better than at full load. Typically, partial load conditions prevail for more than 90% of operation time. A regular air conditioner can only operate at 100% capacity and cannot match the annual efficiencies of an inverter system. The range also uses advanced 410a refrigerant gas for energy efficient and economic operation. Three models are available with outputs from 2.64kW to 5.86kW suitable for rooms from 22sq m to 45sq m. Please select your desired size from the drop down menu below to view individual specifications. >>>
View the product on airandwatercentre.com/ Air and Water Centre
EXPLOSION PROOF MINI-SPLIT AIR CONDITIONERS AND HEAT PUMPS

EXPLOSION PROOF MINI-SPLIT AIR CONDITIONERS AND HEAT PUMPS
Mini-split air conditioners are small systems that are many times used in small offshore buildings with fire-rated walls. Using the split system eliminates the need for fire dampers associated with the air conditioning unit. Other applications include analyzer shelters and small buildings in refineries and petrochemical plants. CSA (C/US) Certified for Class I, Division 2, Groups B, C, D hazardous (Classified) locations, mini-split air conditioners and heat pumps are available in sizes up to 5 tons and with various fan-coil configurations including high wall and ceiling mount styles. All units may also be marked with the US and Canadian Class I/ Zone system upon request (example: Class I, Zone 2, group IIB+H2). The E Series is available with a dual-circuited design such that two air handlers may operate from a single condensing unit. This will allow cooling in two separate rooms or the installation of an air handler at each end of a single room. Division 1 units are available and certified by Marc Climatic Controls to be in accordance with applicable UL and CSA standards. >>>
View the product on marcclimatic.com Marc Climatic Controls
POWER-LINE DRY COOLERS

POWER-LINE DRY COOLERS
THERMOKEY presents a new series of liquid coolers (dry coolers) called “POWER-LINE” featuring various fin geometries in different modules using new materials and a new design. This newly born product is the result of Thermokey’s years of experience in satisfying needs in the industrial cooling sector. The factors that distinguish this new series are the special fin and tube geometry, the fans and the use of modules help achieve the following: - Maximum capacity related to the unit’s dimensions. - Optimized primary fluid pressure drops thanks to the use of various tube diameters within the dry cooler series. - Possibility of an optimized product selection by using different module lengths. - Respect of the most strict environmental norms in terms of acoustic pollution. >>>
View the product on thermokey.it THERMOKEY Groupe - Thermokey
ENERGY SAVING - FREE COOLING AND HEAT RECOVERY

ENERGY SAVING - FREE COOLING AND HEAT RECOVERY
Free cooling 30-180kW packaged water chillers with integrally mounted free cooling coils 30-180kW packaged water chillers with integrally mounted free cooling coils 190-830kW packaged water chillers with integrally mounted free cooling coils 190kW-1.5mW packaged water chillers with integrally mounted free cooling coils These units can be retro-fitted to upgrade any existing chilled water system to free cooling status >>>
View the product on aquacooling.co.uk/ Aqua Cooling Solutions.
REMOTE AIR CONDITIONING SYSTEMS

REMOTE AIR CONDITIONING SYSTEMS
In some cases it may not be possible to put the test item into a conventional chamber. It could be too big or only part of a larger structure that cannot be dismantled. For these occasions the RACS (Remote Air Conditioning Systems) can be used to provide conditioned air to a temporary insulated enclosure built around the test item. RACS units can be compressor-cooled, liquid gas-cooled or a combination of both. >>>
View the product on designenvironmental.co.uk Design Environmental Ltd
HACIENDA SPLIT AIR CONDITIONERS

HACIENDA SPLIT AIR CONDITIONERS
Range includes outputs from 2kW to 7kW cooling This range of Hacienda split air conditioners is ideal for use around the home or office as it provides both cooling and heating. Simply set the unit to your desired temperature and it will automatically adjust its output to achieve it. The range includes four models with outputs from 2kW to 7kW suitable for rooms from 18m˛ to 60m˛. Please select your desired size from the drop down menu below to view individual specifications. Features of this wall-mounted air conditioning system include remote control, three fan speeds, four modes of operation (cooling, heating, dehumidification and fan-only), advanced air filters, on/off timer and sleep mode. All models within the range use advanced 410a refrigerant gas for energy efficient and economic operation. Cooling & heating Very attractive design Air filters: particle & plasma 3 fan speeds 4 modes of operation: heat, cool, dehumidify & fan only Remote control Turbo mode for rapid climate adjustment 24 hour on/off timer Sleep mode >>>
View the product on airandwatercentre.com/ Air and Water Centre
EXPLOSION PROOF MINI-WALL MOUNT CABINET COOLERS

EXPLOSION PROOF MINI-WALL MOUNT CABINET COOLERS
Explosion proof mini-wall mount air conditioners, or cabinet coolers, are typically furnished to cool electronic enclosures, analyzer cabinets, and control panels. The cabinet is rated NEMA 12 with optional NEMA 3R and NEMA 4X stainless steel construction. Several styles are available to fit varying cabinet sizes. Sizes range from 800 to 42,000 BTUH cooling. All units may also be marked with the US and Canadian Class I/ Zone system upon request (example: Class I, Zone 2, group IIB+H2). WMBX series are CSA (C/US) certified for Class I, Division 2, Groups B, C, D hazardous (classified) locations. WMBX-C1 series explosion-proof mini-wall mount air conditioners are for Class I, Division 1, Groups C, D hazardous (classified) locations. >>>
View the product on marcclimatic.com Marc Climatic Controls
UNIT COOLERS - BLAST FREEZER

UNIT COOLERS - BLAST FREEZER
Thermokey presents the Blast Freezer Unit Coolers. This floor unit coolers series is ideal for all sectors where fast freezing of food is necessary, for example industries preparing meat, poultry, fish, bakery, dairy, ice cream, ready-to-serve meals, etc. Blast freezer unit coolers are designed for applications with R404A, R507, NH3 and CO2. The application range is: - FLT series with R404A, from 14 to 71 kW (Te=-40°C ?T1=5K) - FLA series with NH3, from 16 to 99 kW (Te=-40°C ?T1=5K) - FLC series with CO2, from 18 to 107 kW (Te=-40°C ?T1=5K). >>>
View the product on thermokey.it THERMOKEY Groupe - Thermokey
HEAT RECOVERY

HEAT RECOVERY
Custom designed to maximise heat recovery from a water cooling system, heat recovery systems form part of the extensive portfolio of packages available from Stadco Cooling. A major source of untapped waste heat in many situations is the water from an industrial cooling system. These systems frequently contain low grade, but usable heat, from an industrial process of sometimes high grade heat in cooling water. >>>
View the product on stadco-cooling.co.uk Stadco Cooling
PORTABLE AIR CON - COOLING & HEAT 11,000BTU KYD32

PORTABLE AIR CON - COOLING & HEAT 11,000BTU KYD32
This is our most popular portable air conditioner as it provides a relatively high level of cooling as well as heating. It is very user friendly with a digital remote control and lots of features. The KYD32 is suitable for the home, office or any small to medium sized room up to 30m˛. It is very compact and robust in its design compared to others with the same cooling capacity and the power consumption and noise are especially low. As with other portable air conditioners, in order to operate the unit an extraction hose needs to be fed out through a slightly opened door or window. An additional shaped fitting supplied with the KYD32 tapers this hose into a very thin outlet about 5cm wide. This enables it to be vented out of a letterbox or slightly open window. >>>
View the product on airandwatercentre.com/ Air and Water Centre
EXPLOSION PROOF PACKAGED AIR CONDITIONERS - ONSHORE/OFFSHORE

EXPLOSION PROOF PACKAGED AIR CONDITIONERS - ONSHORE/OFFSHORE
ONSHORE/OFFSHORE - Explosion proof packaged air conditioners can be designed for either roof mounting or installation at grade and can be provided with complete ductwork systems. Larger packaged units can be designed to cool, heat, and provide Type X, Y, or Z pressurization. Gas-phase air filtration can be incorporated into these systems to remove hydrocarbons and acid gases. All units may also be marked with the US and Canadian Class I, Zone system upon request (example: Class I, Zone 2, group IIB+H2). Typical applications include control rooms, switchgear buildings, motor control rooms, RIE buildings, driller’s cabins, and many others for both onshore and offshore service. CSA (C/US) Certified from 1-1/2 to 20 tons for Class I, Division 2, Groups B, C, D hazardous (Classified) locations, packaged air conditioners and heat pumps can be furnished with auxiliary blowers, motorized dampers, electric heat (in air conditioners), thermostatic controls, control panels for pressurization and/or timed lead-lag for redundant air conditioners, and many other features to satisfy customer needs in heating, cooling, humidity control, pressurization, etc. Options include the Marc protective coating or stainless steel cabinet and coil coating for corrosion prevention. IEC Zone 2 - The PACF series is similar to the PACX except that it is designed for use in IEC Zone 2 hazardous areas. Although they do not bear the CE mark as required for installation in the European Union, they are intended for use in other countries that prefer the IEC methods of protection. The PACF series air conditioners are certified to conform to Zone 2 requirements by Marc Climatic Controls and all applicable Certificates of Conformity will be provided for components. These air conditioners are not for installation in North America. Custom units can be designed and manufactured to comply with special customer requirements. Packaged units can be designed and furnished to provide dual air conditioning and ventilation systems in a single cabinet. The DPAX series shown at the right was designed for use with analyzer shelters to provide 100 percent redundant air conditioning and heating with gas-phase air filtration for the make-up air, dehumidification, humidifiers, and dual ventilation blowers. Two explosion proof disconnects were installed on each cabinet. With dual built-in control sections, each unit was provided with a separate thermostatic control panel for mounting inside the shelter. Each unit was CSA certified for Class I, Division 2, Groups B,C,D hazardous (classified) locations. >>>
View the product on marcclimatic.com Marc Climatic Controls
UNIT COOLERS - INDUSTRIAL

UNIT COOLERS - INDUSTRIAL
CAPACITIES AND APPLICATIONS Newly designed cubic and dual flow industrial unit coolers, suitable for all applications and HFC and HCFC refrigerants. The capacities, air flow and electric ratings are declared, verified and certified according to the ENV 328 norms by the laboratories of the TÜV- Technische Überwachung Verein Institute in Bavaria, Germany. HEAT EXCHANGER COIL The heat exchanger coil is produced using a new geometry designed specifically for refrigeration, with high efficiency corrugated surface “TK” aluminium fins and 1/2“ diameter copper tubes internally grooved for direct expansion (D) and 5/8” diameter for pump operation (P) and flooding (N). The coil is tested to 30 bar, and all of its components are checked in accordance with the company’s stringent production specifications and quality control requirements. >>>
View the product on thermokey.it THERMOKEY Groupe - Thermokey
PORTABLE AIR CON - COOLING ONLY 11,000BTU KY32

PORTABLE AIR CON - COOLING ONLY 11,000BTU KY32
This great portable air conditioner is extremely reliable, has a high cooling output of 3.2kW (11,000Btu) and the added convenience of a remote control. This portable unit brings affordable air conditioning to the home, office or any small to medium sized room up to 30m˛. It is very compact in its design compared to others with the same cooling capacity and the power consumption and noise are especially low. As well as via the remote the air conditioner can be controlled with the soft touch digital controls on the top. The unit can be operated by feeding the extraction hose out through an open window for a temporary cooling solution or permanently by drilling a hole through an external wall. During the cooling process this air conditioner also dehumidifies, making the air more comfortable on humid days. The water that is removed from the air is stored in a water tank for easy disposal. A light will illuminate to indicate this needs doing. Alternatively the unit can be plumbed to a drain for continuous operation. Other features include a 24 hour on/off timer, three speeds of operation and a remote control. >>>
View the product on airandwatercentre.com/ Air and Water Centre
EXPLOSION PROOF PORTABLE AIR CONDITIONERS

EXPLOSION PROOF PORTABLE AIR CONDITIONERS
Marc explosion proof portable air conditioners are designed as a quick and easy way to provide temporary or emergency cooling in hazardous locations. Pre-packaged and ready to run, some portables are furnished on casters for ease of mobility. Larger units can be trailer-mounted for easy towing and moving into place. Portables can be furnished for Class I, Division 1 (Zone 1) or Class I, Division 2 (Zone 2) hazardous (Classified) locations and in various voltages. Power cables are optional on smaller models. Many larger portables are CSA Certified (C/US) for Class I, Division 2, Groups B,C,D hazardous (Classified) locations. Options include the Marc protective cabinet and/or coil coating for corrosion prevention, stainless steel cabinet, copper tube/copper fin evaporator and condenser coils (standard is copper tube/aluminum fin), electric heat, disconnect, flexible duct for supply and return air, 100% outdoor air arrangement with weatherhood, and special customer requirements. >>>
View the product on marcclimatic.com Marc Climatic Controls
UNIT COOLERS - LIGHT CUBIC

UNIT COOLERS - LIGHT CUBIC
PH - PM SERIES Thermokey presents a new direct expansion unit coolers series designed for small and medium cold rooms for storage of fresh or frozen goods. PH series fin spacing 4,0 mm for temperatures 15 ÷ 2°C PM series fin spacing 6,0 mm for temperatures 2 ÷ -20°C The heat exchanger coil is produced using a new geometry designed specifically for refrigeration, with high efficiency corrugated surface “TK” aluminium fins and ˝” diameter copper tubes internally grooved. The casing is made in RAL 9010 painted galvanized steel with some parts in ABS thermoplastic resin. All models use single-phase 230V-50/60Hz fan motors with IP54 protection and internal thermalcontact. Four different diameters of fan motors are available: Ř300, Ř350, Ř400 and Ř450 mm with a number of fan motors from 1 to 4 for each single fan diameter. >>>
View the product on thermokey.it THERMOKEY Groupe - Thermokey
VACUUM CALIBRATION BATH

VACUUM CALIBRATION BATH
VACUUM CALIBRATION BATHS Choice of direct vacuum or Venturi vacuum Standard models from 1.8 to 6 metres long (6ft - 20ft) Choice of 100mm (4 inches) or 200mm (8 inches)diameter capacity Option of using factory water or self-contained recirculation system Stainless steel construction with corrosion resistant fittings Fully Adjustable in three places Special models for medical tubing and sticky polymers >>>
View the product on bostonmatthews.co.uk Boston Matthews
PORTABLE AIR CONDITIONER 15,000BTU KY44

PORTABLE AIR CONDITIONER 15,000BTU KY44
This is the most powerful monobloc air conditioner available in the UK. It has a similar output to wall-mounted air conditioning systems but without all the cost and hassle of having to install it. This unit is ideal for large rooms, conservatories, offices or server rooms. As this is such a powerful unit it may not be suitable for quiet areas, like bedrooms, as its noisier than other smaller units. Features include a remote control, programmable 12 hour timer that will turn the unit off when desired, 3 cooling speeds and 4 modes of operation (automatic, cooling, dehumidifying and fan only). As it is a monobloc system it needs to vent the hot air outside so it's vent hose must be fed through a slightly open window or door. However, the window adaptor also supplied enables you to do this with a minimum of air being allowed into the room. >>>
View the product on airandwatercentre.com/ Air and Water Centre
EXPLOSION PROOF ROOM AIR CONDITIONERS

EXPLOSION PROOF ROOM AIR CONDITIONERS
Explosion proof room air conditioners, also referred to as window air conditioners, are typically used to condition small spaces needing up to 36,000 BTU's of cooling and requiring no ductwork. Air conditioning with room units (window units) can provide an economical solution for many applications. All room units may also be marked with the US and Canadian Class I/ Zone system upon request (example: Class I, Zone 2, group IIB+H2). RCBX series air conditioners and RHBX series heat pumps are CSA (C/US) certified for Class I, Division 2, Groups B, C, D hazardous (classified) locations. Explosion proof RCBX-C1 series air conditioners are CSA (C/US) certified for Class I, Division 1, Groups C, D hazardous (classified) locations. RHBX-C1 series heat pumps are for use in Class I, Division 1, Groups C, D hazardous (classified) locations. RCXG series air conditioners, with or without electric heat, have a Division 2 rating in the condenser (outdoor) section only and are for use with Type Z pressurized buildings. Dust-ignition-proof RCBX-E1 series air conditioners and RHBX-E1 series heat pumps are for use in Class II, Division 1, Groups E, F, G hazardous (classified) locations. Combustible dust hazardous location RCBX-F2 series air conditioners and RHBX-F2 series heat pumps are for use in Class II, Division 2, Groups F, G hazardous (classified) locations. Options include corrosion coatings on coils and cabinets, stainless steel cabinets, and auto-changeover thermostats for heating and cooling units. >>>
View the product on marcclimatic.com Marc Climatic Controls
UNIT COOLERS - RADIAL

UNIT COOLERS - RADIAL
NEW THERMOKEY INDUSTRIAL UNIT COOLERS THT - TBT SERIES WITH RADIAL FANS The radial unit coolers patented by Thermokey are designed for: - The refrigeration industry where is requested an external pressure of 150 Pa in order to obtain a good air distribution in a textile, plastic or other material type sock distributor. - Large cold rooms and warehouses. The most important innovation introduced by this kind of unit cooler is the use of radial fans instead of the centrifugal ones. The simple design and the wide range of available radial fans allows a broad response to all the market’s needs not only for the high available external pressures but also for the reduced resulting sound pressure levels mostly needed in cold rooms where stored products are handled by personnel available for long periods of time, like in the food industry. >>>
View the product on thermokey.it THERMOKEY Groupe - Thermokey
PORTABLE AIR CONDITIONER 8,500BTU

PORTABLE AIR CONDITIONER 8,500BTU
This great value portable air conditioner has an 8,500Btu (2.5kW) output making it suitable for areas up to 20m˛. Thermostatic control allows the unit to be set to maintain a certain temperature and activate or deactivate itself accordingly when this temperature is reached. Two cooling speeds and two fan speeds will adjust the output of the air conditioner for quieter or maximum operation. An eight hour timer can be set to automatically turn the unit off in up to eight hours time so that, should you fall asleep, the air conditioner will shut itself down. As with other portable air conditioners, in order to operate the unit an extraction hose needs to be fed out through a slightly opened door or window. If you are in a large office and not near a window then it is possible to vent the extraction hose above a suspended ceiling. Alternatively, you can buy the 3m exhaust extension hose also available in the multi-buy section below. During the cooling process this air conditioner will also dehumidify, evaporating the moisture that condenses within it out through the air hose. When used in very hot conditions the water tank may need to be occasionally emptied manually with the water container provided. The louvres can be manually adjusted to give air movement exactly where you need it and the smooth glide castor make it easy to move around and position. 2 cooling speeds & 2 fan speeds 8 hour timer Energy rating: A Dehumidifies as well as cools Adjustable louvres Excellent value air conditioner Suitable for rooms up to 20m˛ >>>
View the product on airandwatercentre.com/ Air and Water Centre
EXPLOSION PROOF SPLIT-SYSTEM AIR CONDITIONERS AND HEAT PUMPS - SPLIT-SYSTEM

EXPLOSION PROOF SPLIT-SYSTEM AIR CONDITIONERS AND HEAT PUMPS - SPLIT-SYSTEM
A split-system utilizes separate or "split" evaporator and condensing sections for the air conditioning system. The evaporator section, or air handling unit, is typically located indoors at the floor or ceiling level. Larger systems may require roof-mounting and can be designed to cool, heat, provide Type X, Y, or Z pressurization, and chemical filtration when required. All units may also be marked with the US and Canadian Class I/ Zone system upon request (example: Class I, Zone 2, group IIB+H2). CSA (C/US) Certified from 1-1/2 to 20 tons for Class I, Division 2, Groups B, C, D hazardous (Classified) locations, split-system air conditioners and heat pumps can be furnished with auxilliary blowers, motorized dampers, electric heat (in air conditioners), thermostatic controls, and many other features to satisfy customer needs in heating, cooling, humidity control, pressurization, etc. Options include stainless steel cabinets and coil coating for corrosion prevention. IEC Zone 2 - Split-system air handlers and condensing units can be designed for use in IEC Zone 2 hazardous areas. Although they do not bear the CE mark as required for installation in the European Union, they are intended for use in other countries that prefer the IEC methods of protection. These air conditioners are certified to conform to Zone 2 requirements by Marc Climatic Controls and all applicable Certificates of Conformity will be provided for components. These air conditioners are not for installation in North America. >>>
View the product on marcclimatic.com Marc Climatic Controls
PORTABLE AIR CONDITIONER+REMOTE CONTROL 10,000BTU

PORTABLE AIR CONDITIONER+REMOTE CONTROL 10,000BTU
This powerful air conditioner is an excellent value unit. It cools at up to 10,000Btu, suitable for rooms up to 25m˛, and has a timer and thermostatic controls. The timer allows you to set the unit to turn itself off in a certain time. This means that if you have it on in the bedroom and fall asleep it won't be left running all night. A thermostatic controller enables you to set the desired temperature you wish to cool a room to and once that temperature is reached the unit will switch itself off. Once the temperature rises a few degrees above the set point, the unit will reactivate itself. This maintains a comfortable room temperature without wasting energy by over-cooling a room. The air conditioner has two speeds for maximum cooling or quieter operation. It can also be used as just a simple fan to assist in air movement. A remote control allows you to adjust the temperature, fan speed, mode of operation, timer and turn the unit on and off. Adjustable louvres enable you to direct the cool air precisely where you need it and its smooth glide castors make it easy to move around and position. This air conditioner works by drawing hot air into the unit over an evaporator which contains a low pressure and very cold refrigerant. The air is cooled and then blown out through the front vents while the hot air is expelled through a rear hose. This hose has a square ended fitting to enable it to be positioned through a slightly opened window, door or even a cat-flap. >>>
View the product on airandwatercentre.com/ Air and Water Centre
EXPLOSION PROOF WALL MOUNT AIR CONDITIONERS

EXPLOSION PROOF WALL MOUNT AIR CONDITIONERS
Explosion proof wall mount air conditioners are typically mounted on an exterior wall of a shelter or building . Larger, heavier units also require bottom support. The installation is simplified and requires no duct work for most applications. Fieldwork is minimized as the building can be shipped with the wall mount air conditioner installed and wired. Models can be furnished for Class I, Division 2 - or - Class I, Division 1 hazardous locations. Other models are available with only the condenser (outdoor) section Division 2 rated when used on a pressurized building such as a switchgear or MCC building with an unclassified interior. Class II, dust-ignitionproof wall mount air conditioners are also available. Fully-redundant heating, cooling, pressurizing, and filtering systems can be designed around your application with cooling capacities up to 20 tons. For more information on these types of systems go to our Combination A/C & pressurization page. CSA (C/US) Certified - Our hazardous location wall mount air conditioners are CSA (C/US) certified in sizes 1˝ to 6 Tons in the following series (1 Ton also available in most series): WCBX – Class I, Division 2, Groups B, C, D (also marked Class I, Zone 2, Group IIB+H2 upon request) WCBX-H – Division 2 with Electric Heat (also marked Class I, Zone 2, Group IIB+H2 upon request) WCBX-C1 – Class I, Division 1, Groups C, D (also marked Class I, Zone 1, Group IIB upon request) WCBX-C12 – Division 1 Indoors/Division 2 Outdoors (also marked Class/ Zone upon request) WCXG – Division 2 Outdoor Section Only (also marked Class I, Zone 2, Group IIB+H2 for the outdoor section upon request) WCPX – Heating, Cooling, & (NFPA 496) Pressurization. Look for this product under Combination A/C & pressurization. CSA (C/US) Certified - Our hazardous location wall mount heat pumps are CSA (C/US) certified in sizes 1˝ to 6 Tons in the following series: WHBX – Class I, Division 2, Groups B, C, D (also marked Class I, Zone 2, Group IIB+H2 upon request) WHBX-H – Division 2 with Electric Heat (also marked Class I, Zone 2, Group IIB+H2 upon request) WHPX – Heating, Cooling, & (NFPA 496) Pressurization. Look for this product under Combination A/C & pressurization. Options include electric heat, corrosion coatings on coils and cabinets, stainless steel cabinets, grille-mounted thermostats, auxiliary blowers, stacks, 50 or 60 HZ, and many others. IEC Zone 2 - The WCBF series is similar to the WCBX except that it is designed for use in IEC Zone 2 hazardous areas. Although they do not bear the CE mark as required for installation in the European Union, they are intended for use in other countries that prefer the IEC methods of protection. The WCBF series are certified to conform to Zone 2 requirements by Marc Climatic Controls and all applicable Certificates of Conformity will be provided for components. These air conditioners are not for installation in North America. >>>
View the product on marcclimatic.com Marc Climatic Controls
PREM-I-AIR QUICK-FIT SPLIT AIR CONDITIONERS

PREM-I-AIR QUICK-FIT SPLIT AIR CONDITIONERS
From 2.6kW to 5.27kW output with cooling & heating This great looking range of easy-to-install wall-mounted air conditioners offers both cooling and energy efficient heating. This means it's a true climate control system and can be used throughout the year. Outputs range from 2.6kW of cooling/heating to 5.27kW of cooling/heating. Please select your desired model from the drop down menu below. This system comprises of an internal unit that is mounted on the wall of the room to be cooled with screws. It needs to be on an external wall as a hole is drilled through the wall so the inside unit can be connected to the outside unit. The outside unit is mounted directly on the ground. Quick-fit technology No copper pipes or specialist tools required Heating as well as cooling Remote control operation On/off timer operation Sleep setting for energy efficient operation Oscillating louvres for improved air circulation Removable & washable filters >>>
View the product on airandwatercentre.com/ Air and Water Centre
TITAN INDUSTRIAL PORTABLE AIR CONDITIONER 21000BTU

TITAN INDUSTRIAL PORTABLE AIR CONDITIONER 21000BTU
This industrial portable air conditioner is for spot cooling of large areas where cooling the entire area is not feasible. Typical applications for the Titan include computer rooms, kitchens, hospitals, sports halls, factories, temporary offices, military uses, laboratories and marquees. Its output is a massive 21,000Btu or 6.16kW, which is suitable for cooling an area up to 50m˛. Suitable for areas up to 50m˛ Massive 21,000btu (6.16kW) output Easy and quick to set up with standard 3-pin plug Thermostatically controlled output Energy rating :B >>>
View the product on airandwatercentre.com/ Air and Water Centre
TITAN INDUSTRIAL PORTABLE AIR CONDITIONER 25000BTU

TITAN INDUSTRIAL PORTABLE AIR CONDITIONER 25000BTU
This industrial portable air conditioner is for spot cooling of large areas where cooling the entire area is not feasible. Typical applications include computer rooms, kitchens, hospitals, sports halls, factories, temporary offices, military uses, laboratories and marquees. Its output is a massive 25,000Btu or 7.3kW, which is suitable for cooling an area up to 60m˛. Suitable for areas up to 60m˛ Massive 25,000Btu (7.3kW) output Easy and quick to set up with standard 3-pin plug Thermostatically controlled output Two cool air outlets Energy rating :B >>>
View the product on airandwatercentre.com/ Air and Water Centre




  Search    
 
 
 
Search
See all of the sector's products : Environmental engineering