Gluing: suppliers, wholesalers and manufacturers on Hellopro
Search   


Gluing :

124 products
Select the category
Selection of 43 products among 124
LOW COST GLUE GUN KIT

LOW COST GLUE GUN KIT
Kit contains: 1 Packer low cost hotmelt glue gun (ref P312)1 Kilo of clear general purpose adhesive sticks (12 mm diameter x 300 mm long).This lightweight professional glue gun is the economical and practical choice for your workplace. Ideal where small quantities of adhesive are required, use this glue gun allows you to apply your adhesive with precision. Suitable for product assembly, packaging and general use as well as in schools and colleges. Self regulating heating controls. Supplied with detachable base stand which allows the glue gun to stand upright, making the gun safer to put down in between use and easier to pick up. Kit contains standard hotmelt gun.Melt rate: up to 750 g/hWarm up time: 5-7 minutes.Power: 100/240 volt.Weight: 0.23 kg.Adhesive: 12 mm diameter x 300 mm long sticks.Clear adhesive sticks are for general purpose use and are ideal for the adherence of foam, plastics or fabrics. >>>
View the product on rajapack.co.uk
PACKER LOW COST GLUE GUN

PACKER LOW COST GLUE GUN
This lightweight professional glue gun is the economical and practical choice for your workplace. Ideal where small quantities of adhesive are required, use this glue gun allows you to apply your adhesive with precision. Suitable for product assembly, packaging and general use as well as in schools and colleges. Self regulating heating controls. Supplied with detachable base stand which allows the glue gun to stand upright, making the gun safer to put down in between use and easier to pick up. Choose the hotmelt option as the standard glue gun for everyday applications, or the lowmelt glue gun for heat sensitive materials and safer working environments.Melt rate: up to 750 g/hrWarm up time: 5-7 minutesPower: 100/240 voltWeight: 0.23 kgAdhesive: 12 mm diameter x 300 mm long sticks.Tan coloured carton adhesive glue sticks (ref PMD96-12) and clear general purpose adhesive glue sticks (ref PMD97-12) are compatible with hot melt glue guns. White lowmelt adhesive sticks (ref LM94-12) are compatible with the lowmelt glue gun. >>>
View the product on rajapack.co.uk
PACKER LOW COST GLUE GUN

PACKER LOW COST GLUE GUN
This lightweight professional glue gun is the economical and practical choice for your workplace. Ideal where small quantities of adhesive are required, use this glue gun allows you to apply your adhesive with precision. Suitable for product assembly, packaging and general use as well as in schools and colleges. Self regulating heating controls. Supplied with detachable base stand which allows the glue gun to stand upright, making the gun safer to put down in between use and easier to pick up. Choose the hotmelt option as the standard glue gun for everyday applications, or the lowmelt glue gun for heat sensitive materials and safer working environments.Melt rate: up to 750 g/hrWarm up time: 5-7 minutesPower: 100/240 voltWeight: 0.23 kgAdhesive: 12 mm diameter x 300 mm long sticks.Tan coloured carton adhesive glue sticks (ref PMD96-12) and clear general purpose adhesive glue sticks (ref PMD97-12) are compatible with hot melt glue guns. White lowmelt adhesive sticks (ref LM94-12) are compatible with the lowmelt glue gun. >>>
View the product on rajapack.co.uk
1200-EC UV CURING FLOOD LAMP

1200-EC UV CURING FLOOD LAMP
The DYMAX 1200 Series focused beam UV curing flood lamps use high-intensity UV light and/or visible light for the rapid curing of UV adhesives, UV coatings and UV inks. A DYMAX 1200-EC UV flood lamp delivers broad spectrum light concentrated primarily in the UV-A range (320-390 nm wavelength) to achieve maximum cure depths and "tack-free" cures, typically in 10-30 seconds. DYMAX 1200-EC UV flood lights are specifically designed for applications requiring high-intensity UV light concentrated in a narrow 1" x 6" beam. High intensity 1" x 6" focused beam of UV light Tack-free UV cures in 10-30 seconds Rugged brushed aluminum construction Ideal for UV curing trays of small parts UV curing flood lamps can be conveyor mounted or used as stand-alone, bench-top systems 1200-EC focused beam UV curing lamps provide low cost cures for bonded or coated areas larger than 1/2 inch and can be used for UV curing trays of small parts or parts arranged in a linear configuration. They are used for a variety of UV bonding, UV potting, UV sealing, UV tacking and UV encapsulating applications within the industrial, automotive, electronic, medical device and optical industries. The 1200-EC focused beam UV curing flood lamp consists of a power supply, reflector housing and 400 Watt metal halide UV curing bulb. Accessories can be ordered with or retrofitted to the UV curing lamp after purchase, including shutter assemblies, UV shields and UV flood lamp stands. Output Power 400 Watts UV Light Source Unfiltered full spectrum UV focused beam light Typical intensity in the UVA range (320-390 nm*) at 4.5" from bottom edge of reflector housing 350 mW/cm2 Dimensions of Illuminated Area 1" x 6" beam (2.5 cm x 15.2 cm) EC Input Power Requirements Universal 90-265 VAC (grounded), 47-63 Hz 1200-EC Power Supply Weight 12.25 lbs. (5.6 kg) 1200-EC Power Supply Dimensions (approximate) 12" L x 16" W x 4" H (30.5 cm x 40.6 cm x 10.2 cm) Reflector Housing Dimensions(approximate) 9" L x 10.5" W x 7" H (22.9 cm x 26.7 cm x 17.8 cm) Reflector Housing Weight 3.4 lb. (1.5 kg) >>>
View the product on dymax.com DYMAX
DISPENSER/CONTROLLER - DX-300 DIGITAL

DISPENSER/CONTROLLER - DX-300 DIGITAL
The DX-300 Digital Dispenser/Controller offers the option of programming up to 10 programs. It is intuitive to use and allows for reproduction of sequences of beads or dots with high repeatability. The system includes an adjustable vacuum feature for controlling drip of fluids between dispense cycles. A vacuum gauge is included monitor suck-back. The modern-style unit has a small footprint and conserves workspace through a design that allows multiple units to be stacked and fastened on top of each other. A highly responsive air pressure and vacuum management system, coupled with a digital timing circuit, provides consistent and repeatable fluid dispensing and material waste control. Available in two versions of operating pressure: 0 to100 psi for general applications, and 0 to 15 psi for specific low viscosity applications. The DX-300/315 Series is immediately usable anywhere in the world with sample tips, barrels, syringe adapters, and a universal power supply. >>>
View the product on okinternational.com Ok International
GLUE ADHESIVE DISPENSERS - GL541E

GLUE ADHESIVE DISPENSERS - GL541E
The GL541E High Speed Glue Dispenser is the ideal addition to a CP6/7 assembly lineBasic SpecificationsCycle time 0.09 seconds/dotTravel distance - X-axis within 8mm Y-axis within 6mm Needle up/down distance of 8mmApplication time: 0.05 secondsDispensing accuracy: +/- 0.15mm in th X and Y directions (3 sigma)Board loading time: Aproximately 5 secondsFiducial Mark Reading time: approcximately 0.5 sec./markBoard size: Max 356(W) x 457 (L)Min: 50mm(W) X 80mm (L)Thickness: (0.5) 0.8mm - 4.0mm >>>
View the product on alternativesmt.com Alternative SMT
DRUMUNLOADERS

DRUMUNLOADERS
«Robamelt» drumunloaders melt thermoplastic adhesives, PUR hotmelts or sealing compounds and pump them from the drum. The pumped material is used for direct application onto a product or for premelting or refilling other devices. Robamelt RMC20, RMC50 und RMD200. Three unit sizes for 20, 50 und 200 litre drums FEP antistick coating at the melting plate and at the pump block. >>>
View the product on robatech.fr ROBATECH
ALFACRYL FR INTUMESCENT ACRYLIC

ALFACRYL FR INTUMESCENT ACRYLIC
Alfacryl FR Intumescent Acrylic is a one-part fire resistant gun applied joint sealant. The formulation is based on an emulsion acrylic, which gives a firm, but flexible seal to joints in a variety of fire rated structures. The product has been designed to provide optimum sealing and application performance.with outstanding fire resistance. Alfacryl FR Intumescent Acrylic has been extensively tested to BS 476 part 20 and is capable of achieving over 4 hours fire resistance in joint widths up to 50mm wide. >>>
View the product on tremco-illbruck.co.uk TREMCO ILLBRUCK LTD
GLUE REMOVER

GLUE REMOVER
This Glue remover is in a liquid form and it will successfully removeHAFIXS Professional Glue. It can be used to reverse badly bonded parts, it can remove glue from skin, glue spots on fabric or clothing, from accidental spillage on surfaces. It can be used to clean away any glue residue when bonding parts that might later collect dust. To clean glue from the nozzles applicator after use. It is suitable for use with most materials such as: porcelain, china, crystal, glass, ceramic, marble, wood, MDF, plastics, ABS, PVC, acrylic, rubber, cloth, leather, metal etc. >>>
View the product on hafixs.co.uk Hafixs Industrial Products
1200-EC UV CURING FLOOD LAMP

1200-EC UV CURING FLOOD LAMP
The DYMAX 1200 Series focused beam UV curing flood lamps use high-intensity UV light and/or visible light for the rapid curing of UV adhesives, UV coatings and UV inks. A DYMAX 1200-EC UV flood lamp delivers broad spectrum light concentrated primarily in the UV-A range (320-390 nm wavelength) to achieve maximum cure depths and "tack-free" cures, typically in 10-30 seconds. DYMAX 1200-EC UV flood lights are specifically designed for applications requiring high-intensity UV light concentrated in a narrow 1" x 6" beam. High intensity 1" x 6" focused beam of UV light Tack-free UV cures in 10-30 seconds Rugged brushed aluminum construction Ideal for UV curing trays of small parts UV curing flood lamps can be conveyor mounted or used as stand-alone, bench-top systems 1200-EC focused beam UV curing lamps provide low cost cures for bonded or coated areas larger than 1/2 inch and can be used for UV curing trays of small parts or parts arranged in a linear configuration. They are used for a variety of UV bonding, UV potting, UV sealing, UV tacking and UV encapsulating applications within the industrial, automotive, electronic, medical device and optical industries. The 1200-EC focused beam UV curing flood lamp consists of a power supply, reflector housing and 400 Watt metal halide UV curing bulb. Accessories can be ordered with or retrofitted to the UV curing lamp after purchase, including shutter assemblies, UV shields and UV flood lamp stands. Output Power 400 Watts UV Light Source Unfiltered full spectrum UV focused beam light Typical intensity in the UVA range (320-390 nm*) at 4.5" from bottom edge of reflector housing 350 mW/cm2 Dimensions of Illuminated Area 1" x 6" beam (2.5 cm x 15.2 cm) EC Input Power Requirements Universal 90-265 VAC (grounded), 47-63 Hz 1200-EC Power Supply Weight 12.25 lbs. (5.6 kg) 1200-EC Power Supply Dimensions (approximate) 12" L x 16" W x 4" H (30.5 cm x 40.6 cm x 10.2 cm) Reflector Housing Dimensions(approximate) 9" L x 10.5" W x 7" H (22.9 cm x 26.7 cm x 17.8 cm) Reflector Housing Weight 3.4 lb. (1.5 kg) >>>
View the product on dymax.com DYMAX
DISPENSER/CONTROLLER - DX-350 DIGITAL

DISPENSER/CONTROLLER - DX-350 DIGITAL
The DX-350/355 Series dispenses low, medium and high-viscosity fluids accurately and consistently. The DX-350/355 Series is immediately usable anywhere in the world with its accompanying tools, accessories and universal power supply. The modern-style enclosure has a small footprint and conserves workspace through exterior design that allows multiple units to be stacked and fastened on top of each other. A highly responsive air pressure and vacuum management system, coupled with a digital timing circuit and digital pressure/vacuum read out provides repeatable fluid dispensing. >>>
View the product on okinternational.com Ok International
GLUE ADHESIVE DISPENSERS - GL5E

GLUE ADHESIVE DISPENSERS - GL5E
High-Speed ApplicationThe GL-V attains an application speed of 0.13 seconds per dot, giving it ample processing power even when installed before a super high-speed placing machine like the CP-6.FeaturesDispensing speed of 0.13 seconds per dotAccepts cooler directly without added floor spaceThree programmable syringes and a needle assortment compatible with a wide range of components Fuji - GL5E - Glue Adhesive DispensersVision correction for high-precision dispensing even with small chips and high-density boardsGlue dot feedback control (patent pending)Maximum 20" x 80" board capacity >>>
View the product on alternativesmt.com Alternative SMT
PU FOAM - ALFAS BOND FR

PU FOAM - ALFAS BOND FR
Alfas Bond FR is a one-component polyurethane (PU) foam, packaged in aerosol form for in-situ application. The propellants used are CFC and (H)CFC free and have a zero ozone depletion potential. The product expands and cures on application through the absorption of moisture from the atmosphere. The cured foam has a substantially closed cell structure throughout and hardens to a semi-rigid form which is both firm and yielding and yet can be trimmed using a sharp knife Alfas Bond FR is available in two types of canister: In-situ Grade (dispensed via a plastic nozzle) and a Gun Grade (for use with the Alfas Bond FR Application Gun). A dual purpose solvent and spray cleaner (Webbflex PU Foam Solvent Cleaner) is available for cleaning the guns and ancillary equipment, details are available upon request from the Sales office. >>>
View the product on tremco-illbruck.co.uk TREMCO ILLBRUCK LTD
2000-EC MODULAR UV FLOOD LAMP

2000-EC MODULAR UV FLOOD LAMP
The DYMAX 2000-EC Series UV curing flood lamps are designed for general purpose, low intensity UV curing of UV adhesives, UV coatings and UV inks. A DYMAX 2000-EC UV flood lamp is equipped with internal filters which effectively limit output to longwave, worker-friendly ultraviolet energy. The 64 square inch curing area of the 2000-EC Series UV flood lights make them well suited for laboratory production and large batch processing. Longer Bulb Warranty - these bulbs now come with a 2,000 hour warranty! Large 8" x 8" UV curing area Rugged brushed aluminum construction Ideal for batch processing and the UV curing of large areas UV curing flood lamps can be conveyor mounted or used as stand-alone, bench-top systems 2000-EC UV curing lamps are used for a variety of UV bonding, UV potting, UV sealing, UV tacking and UV encapsulating applications within the industrial, automotive, electronic, medical device and optical industries. >>>
View the product on dymax.com DYMAX
DISPENSERS/CONTROLLERS - DX-200 SERIES DIGITAL

DISPENSERS/CONTROLLERS - DX-200 SERIES DIGITAL
The DX-200 Series Digital Dispensers/Controllers are economical, highly accurate and repeatable micro-air dispensing systems. These precision fluid dispensing systems include digital timer, vacuum control for all viscosities of fluids. Packaged ready to use with power adapter, air hose, sample tips, barrel and syringe adapter. Available in two versions of operating pressure: 0 to 100 psi for general applications, and 0 to 15 psi for specific low viscosity applications. >>>
View the product on okinternational.com Ok International
2000-EC MODULAR UV FLOOD LAMP

2000-EC MODULAR UV FLOOD LAMP
The DYMAX 2000-EC Series UV curing flood lamps are designed for general purpose, low intensity UV curing of UV adhesives, UV coatings and UV inks. A DYMAX 2000-EC UV flood lamp is equipped with internal filters which effectively limit output to longwave, worker-friendly ultraviolet energy. The 64 square inch curing area of the 2000-EC Series UV flood lights make them well suited for laboratory production and large batch processing. Longer Bulb Warranty - these bulbs now come with a 2,000 hour warranty! Large 8" x 8" UV curing area Rugged brushed aluminum construction Ideal for batch processing and the UV curing of large areas UV curing flood lamps can be conveyor mounted or used as stand-alone, bench-top systems 2000-EC UV curing lamps are used for a variety of UV bonding, UV potting, UV sealing, UV tacking and UV encapsulating applications within the industrial, automotive, electronic, medical device and optical industries. >>>
View the product on dymax.com DYMAX
DISPENSERS/CONTROLLERS - DX-250 SERIES DIGITAL

DISPENSERS/CONTROLLERS - DX-250 SERIES DIGITAL
The DX-250/255 Series dispenses low, medium and high-viscosity fluids accurately and consistently. The DX-250/255 Series is immediately usable anywhere in the world with its accompanying tools, accessories and universal power supply. The modern-style enclosure has a small footprint and conserves workspace through exterior design that allows multiple units to be stacked and fastened on top of each other. A highly responsive air pressure and vacuum management system, coupled with a digital timing circuit, provides consistent and repeatable fluid dispensing and material waste control. User friendly firmware provides quick and easy setup function. >>>
View the product on okinternational.com Ok International
5000-EC MODULAR UV FLOOD LAMP

5000-EC MODULAR UV FLOOD LAMP
The DYMAX 5000-EC Series UV curing flood lamps are designed for high intensity, rapid UV curing of UV adhesives, UV coatings and UV inks. 5000-EC UV curing lamps are designed for processes requiring higher intensity UV light concentrated in a narrow 5" x 5" area. The 5000-EC series UV flood lamps deliver concentrated light primarily in the UV-A range (320-390 nm wavelength) to achieve maximum UV cure depths and "tack free" cures, typically in 10-30 seconds. DYMAX UV flood lamps provide low cost cures for bonded or coated areas larger than 1/2 inch2 or can be used for small batch processing or conveyor mounted UV curing. Longer Bulb Warranty - these bulbs now come with a 2,000 hour warranty! Concentrated 5" x 5" curing area UV cures in 10-30 seconds Rugged brushed aluminum construction Low cost UV cures for bonded areas larger than 1/2 inch2 or small batch processing UV curing flood lamps can be conveyor mounted or used as stand alone, bench-top systems The faster curing capability of the 5000-EC UV flood lamp systems gives them the additional ability to cure UV conformal coatings. They are also used for a variety of UV bonding, UV potting, UV sealing, UV tacking and UV encapsulating applications within the industrial, automotive, electronic, medical device and optical industries. Output Power 400 Watts UV Light Source Filtered UVA Flood Typical Intensity in the UVA range (320-390 nm*) at 3" from bottom edge of reflector housing 225 mW/cm2 Dimensions of Illuminated Area 5" x 5" (12.7 cm x 12.7 cm) EC Input Power Requirements: Universal 90-265 VAC (grounded), 47-63 Hz 5000-EC Power Supply Weight 12.25 lbs. (5.6 kg) 5000-EC Power Supply Dimensions (approximate) 12" L x 16" W x 4" H ( 30.5 cm x 40.6 cm x 10.2 cm) Reflector Housing Dimensions (approximate) 6.75" L x 6.75" W x 6.75" H (17.2 cm x 17.2 cm x 17.2 cm) Reflector Housing Weight 2.7 lb. (1.2 kg) >>>
View the product on dymax.com DYMAX
5000-EC MODULAR UV FLOOD LAMP

5000-EC MODULAR UV FLOOD LAMP
The DYMAX 5000-EC Series UV curing flood lamps are designed for high intensity, rapid UV curing of UV adhesives, UV coatings and UV inks. 5000-EC UV curing lamps are designed for processes requiring higher intensity UV light concentrated in a narrow 5" x 5" area. The 5000-EC series UV flood lamps deliver concentrated light primarily in the UV-A range (320-390 nm wavelength) to achieve maximum UV cure depths and "tack free" cures, typically in 10-30 seconds. DYMAX UV flood lamps provide low cost cures for bonded or coated areas larger than 1/2 inch2 or can be used for small batch processing or conveyor mounted UV curing. Longer Bulb Warranty - these bulbs now come with a 2,000 hour warranty! Concentrated 5" x 5" curing area UV cures in 10-30 seconds Rugged brushed aluminum construction Low cost UV cures for bonded areas larger than 1/2 inch2 or small batch processing UV curing flood lamps can be conveyor mounted or used as stand alone, bench-top systems The faster curing capability of the 5000-EC UV flood lamp systems gives them the additional ability to cure UV conformal coatings. They are also used for a variety of UV bonding, UV potting, UV sealing, UV tacking and UV encapsulating applications within the industrial, automotive, electronic, medical device and optical industries. Output Power 400 Watts UV Light Source Filtered UVA Flood Typical Intensity in the UVA range (320-390 nm*) at 3" from bottom edge of reflector housing 225 mW/cm2 Dimensions of Illuminated Area 5" x 5" (12.7 cm x 12.7 cm) EC Input Power Requirements: Universal 90-265 VAC (grounded), 47-63 Hz 5000-EC Power Supply Weight 12.25 lbs. (5.6 kg) 5000-EC Power Supply Dimensions (approximate) 12" L x 16" W x 4" H ( 30.5 cm x 40.6 cm x 10.2 cm) Reflector Housing Dimensions (approximate) 6.75" L x 6.75" W x 6.75" H (17.2 cm x 17.2 cm x 17.2 cm) Reflector Housing Weight 2.7 lb. (1.2 kg) >>>
View the product on dymax.com DYMAX
SYRINGES SYSTEM DISPENSING - 900

SYRINGES SYSTEM DISPENSING - 900
OK International's 900 System Premier Dispensing components are silicone and chloride free and designed to work with industry standard equipment. 900 Series industrial syringes and needles ensure accuracy, repeatability and productivity. Bulk packages are available. 900 Series Syringes Unique ultra-low draft construction of inner diameter yield high accuracy and stability. The syringes are comprised of industry compliant silicone and chlorine free, low friction polypropylene. Available in three different colors: Natural for most generic applications, Amber provides protection of UV/visible light block (up to 520nm), but with the ability to see material inside the barrel; and Black for total light block. Sold in packs of 50. >>>
View the product on okinternational.com Ok International


12Suivant >>Fin >
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Assembly