Selection of 24 products among
24
RAPIDPCR THERMAL CYCLER - SPEEDCYCLER
SpeedCycler — rapidPCR thermal cycler
Thus, a particularly fast instrument for PCR is available not only for the high-throughput lab, but also for use as powerful standard cycler. With the
SpeedCycler, Analytik Jena sets the new standard of speed and quality of thermal cyclers.
The instrument implements heating rates of 12° C/s and cooling rates of 8° C/s. Optimized times for dehybridization and annealing make full use of the speed potential, e. g. of Taq polymerases. The interaction of the system components results in a speed that is up to ten times higher than that obtained with conventional thermal cyclers.
A typical protocol allows a PCR of 25 cycles to be run within less than 8 min.
At a glance:
Ultrafast cycler, up to ten times faster
High-speed temperature control with a heating rate of 12° C and a cooling rate of 8° C
Less than 8 for 25 cycles
High energy transfer by SAC technology
Time and temperature increments/decrements
Available as 36-well, 96-well and 24-well sample block
Heated sliding lid for maximum operating convenience, optionally motorized for automation (96-well plates)
Automated pressing of the lid onto the plate
Whisper-quiet operation
Intuitive and easy operation
Available as stand-alone or PC-controlled model
Allows updating
Higher quality of results
Due to the enormously fast change of temperature (cooling rates) at maximum control accuracy, primer mismatching during the annealing process is efficiently prevented. This results in amplification products of higher specificity.
Features:
High quality of results
Reduced primer mismatching
Higher specificity of amplification products
Sample Protection System (SPS)
No premature heating of the sample possible
No premature chemical reactions
Best sample recovery of very small volumes
>>>
View the product on analytik-jena.de/frontend/
analytik jena
UV HEPA PCR SYSTEMS
Multi-featured equipment for eliminating PCR contamination! PCR equipment brings together UV irradiation and antimicrobial stainless steel to create a dual-attack environment against PCR
contamination. HEPA/UV PCR models feature a four-stage filter assembly plus to UV to eliminate contamination.
Applications
PCR Preparation and Amplification
Main Features
Filtered and sterilized air circulates from the UV/HEPA system into the PCR chamber via positive pressure laminar airflow with high/low settings. Control potential PCR contamination with built-in UV for inactivation of DNA between experiments. Shortwave UV can be used as a standard laboratory practice to reduce surface and airborne contaminants in the chamber.
Four stage filter system:
Pre-filter captures large dust particles
Carbon filter (activated charcoal) eliminates gases, odor, smoke and also reduces ozone to improve microarray data quality
HEPA (high efficiency energy particulate) filter blocks particles down to 0.3 microns
ZerOzone catalyst grid removes ozone
Three UV (UV3) sources:
Filter area
Chamber work area
UV/air recirculator
A 30-minute timer sets shortwave UV exposure to decontaminate apparatus and work chamber for specific times
Antimicrobial coated stainless steel reduces bacterial growth
A safety shut-off switch automatically turns the ultraviolet light off when the door is open
Place large instruments on the work area or tubes, flasks and pipettes on the two removable shelves
Built-in power outlets allow operation of equipment for use in PCR applications
Acrylic panels are specially formulated to block UV wavelengths below 400nm
>>>
View the product on uvp.com
Ultra-Violet Products Ltd
TC-3000 THERMAL CYCLER
Fastest heating rate
Utilising the latest Peltier technology The TC-3000 can go up to 3.6ºC/sec heating rate and 2.0ºC/sec cooling rate.
Space saving designed small footprint
One of the worlds
best selling thermal cyclers. At only 561 cm2, the TC-3000 is even economical on space.
Proven reliability, high performance
Experience in thermal cycler manufacturing since 1987, ensures that the TC-3000 provides both guaranteed performance and quality results, everytime.
Fast-track programming
With modern, intuitive programming and ready-to-go templates, creating even the most complicated protocols is simple.
Other key features and functions:
Heated lid: The selectable temperature range heated lid (+100ºC to +115ºC) designed to reduce the risk of sample evaporation, and it can be enabled or disabled.
Unparalleled block uniformity: ±0.1ºC at 50 ºC, ensuring optimal reproducibility.
Small, low cost: The TC-3000 is one of the smallest, lowest cost unit on the market. It is available with 25 x 0.2ml or 20 x 0.5 ml microtube interchangeable block formats.
PC control & networking: The TC-3000 can be networked together with other Techne cyclers allowing up to 32 cyclers to be connected to one computer.
Password protection: Protect your program against unwanted modifications.
Portable dual voltage: This compact unit is not only light, but has a variable voltage selector.
Full 4-year warranty.
>>>
View the product on techne.com
Techne
TC-512 THERMAL CYCLER
The Techne TC-512 is the only Gradient thermal cycler which enables you to optimise your experiments at the touch of a screen.
Wide linear gradient
The most linear gradient cycler on the market,
with an amazing range of 30°C. Protocols can be optimised in a single experiment.
TouchScreen
The Touchgene Gradient incorporates a large, 115 x 90mm, touch-sensitive screen that provides a unique user-friendly programming interface which is second to none.
Graphical display
The unique ‘real-time’ graphical display shows the sample temperature profile while the program is running, including the upper and lower limits of the gradient. This pictorial, real-time representation means instant visualisation of your experiment’s status.The unique ‘real-time’ graphical display shows the sample temperature profile while the program is running, including the upper and lower limits of the gradient. This pictorial, real-time representation means instant visualisation of your experiment’s status.
o Memory cards: SmartMedia memory cards provide an alternative to internal memory storage of your programs, offering security and flexibility.
o Gradient calculator: The gradient calculator function displays the temperature of each column of tubes. This ensures replication of the experimental conditions.
>>>
View the product on techne.com
Techne
