Selection of 16 products among
16
CABINET AGEING OVEN EB 04
Cabinet Ageing Oven EB 04
A shelf oven which meets all the
requirements of precision ageing which
were historically performed by cell ovens.
EB04
Ageing oven for precision ageing of
rubbers and plastics under controlled conditions. EB 04 is a
shelf oven and conforms to ISO 188, ISO 3383, IEC 811 and technical equivalent standards.
EB 04 is designed to give very low temperature variations in time and space, low air speed and
controlled air exchange rate. This is achieved by using an inner chamber with a controlled air
flow.
EB 04 also has a 3 glass window, illumination of the inner
chamber and separate systems for temperature control and indication with alarm.The oven is
supplied in two sizes, with 60 and 120 l useful volume.
EB 04 is ideal for ageing finished products and large test pieces which are unsuitable for cell
ovens. Both shelves and rods are supplied with the oven for accommodating most types of
samples.
Technical Specification, Ageing Oven EB 04
Temperature range: 40 - 200 °C
Temperature control, 40 - 100 °C: ± 0,5 °C or better
101 - 200 °C: ± 1 °C or better
Temp. variation in time and space: ± 0,25 °C
Temperature sensors: PT 100, 1/3 DIN
Air speed: max 0,001 m/s
Useful volume: 60 or 120 l
Dimensions, inner chamber, w x h x d: 450 x 450 x 300 mm, 60 l
550 x 550 x 400 mm,120 l
Dimensions, external, w x h x d: 750 x 700 x 550 mm, 60 l
850 x 800 x 650 mm,120 l
Dimension, window: dia 250 mm (3 glass)
Shelf positions: 3
Shelves: 2
Illumination of the inner chamber: 12 V, 5 W halogen lamp
Weight: approx: 65 kg
Voltage: 220-240 V /1/50
Power: 1 200 W
Air changes: 6 - 16 changes/hour, 60 l
3 - 10 changes/hour, 120 l
- The oven meets with good margin, the requirements in ISO 188, ISO 3383, IEC 811 and
other equivalent standards.
- Special design with an inner chamber with controlled air
exchange rate and low air speed.
- The casing consists of steel, painted with epoxy powder paint in bluegreen colour.
- The inner chamber is made of stainless steel.
- Temperature controller with 0,1 °C setpoint.
- Solid state relay for safe control.
- Temperature indicator with sensor in the inner chamber.
- Adjustable over and under temperature limits with alarm.
- Fixed over temperature fuse at 240 °C.
- Flowmeters with needle valves, for setting the air exchange rate.
- Air speed is low and is dependent of the air exchange rate
only.
- Alarm for low air pressure.
- Built in air pump with microfilter for the air, which removes
99,99 % of all particles and vapours over 0,1 µm.
- Cooling channels in the casing and window for low surface temperature.
- Temperature controlled cooling fan for the electronics cabinet.
- Run-time meter
ELASTOCON reserve the right to modify this specification in part
or in whole
95-09
>>>
View the product on nortest.co.uk
Nortest
UNIVERSAL OVENS UNB / UFB / UNE / UFE / UNP / UFP
Ovens for universal use
Our U Universal ovens are so varied that almost every customer application can be covered by them. Choose from:
8 model sizes (14l to 749l)
3 performance classes
Basic/Excellent/Perfect
Natural convection or forced air circulation N/F
With the help of our model selection you can find the right model for your needs, with dimensioned model sketches and extensive technical data for download. We are convinced that the flexibility and technical features of our appliances meet all possible needs. Put us to the test!!
From 31 models, expandable with convenient special accessories tested in practice, you will easily find the appliance ideally suited to your needs. Our three controller classes Basic, Excellent and Perfect gradually cover all requirements of thermal safety, precision and quality assurance.
In accordance with the Law on Medical Products (Directive 93/42/EEC), the UFE / UFP appliances can be used to warm up non-sterile cloths and covers.
60 years of permanent development work, as well as numerous amounts of feedback from practical experience are embodied in each of our appliances:
The modular manufacturing concept in accordance with the principle of equal parts enables a highly varied and cost-effective series production
Almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
Heating concept tuned to product-specific requirements
A wide range of options for programming and documentation using interfaces, Celsius software, integrated log memory and chip cards (features dependent on the controller class)
Universal ovens are safety-tested and bear the signs
>>>
View the product on memmert.com
Memmert
CELL OVEN EB 07 & EB13
Cell Oven EB 07 & EB13
Precision ageing oven with three cells
capable of working at three different
temperatures. Ideal for the small laboratory
with a wide testing spectrum.
EB07 & EB13
Multiple temperature cell ageing oven for precision ageing of rubbers and plastics under
controlled conditions. EB 07 is a cell oven with three cells which can be used with individual
temperatures. The oven conforms to ISO 188, ISO 3383, IEC 811 and technical equivalent
standards. EB 07 is designed to give very low temperature variations in time and space, low air
speed and controlled air exchange rate.
EB 07 gives the lab extra flexibility when carrying out sample ageing tests.
Technical Specification, Ageing Oven EB 07
Temperature range: 40 - 200 °C
Temperature control, 40 - 100 °C: ± 0,5 °C or better
101 - 200 °C: ± 1 °C or better
Temp. variation in time and space: ± 0,25 °C
Temperature sensors: PT 100, 1/3 DIN
Air speed: max 0,001 m/s
Useful volume: 3 x 2,4 l
Cells: 3
Cell dimensions, dia x h: 100 x 300 mm
Dimensions, external, w x h x d: 575 x 465 x 400 mm
Weight: approx: 40 kg
Voltage: 220-240 V /1/50
Power: 700 W
Air changes: 3 - 20 changes/hour
- The oven meets with good margin, the requirements in ISO 188,
ISO 3383, IEC 811 and other equivalent standards.
- The casing consists of steel, painted with epoxy powder paint in bluegreen colour.
- Specially designed band heaters for accurate temperature control.
- Temperature controller with 0,1 °C setpoint.
- Solid state relay for safe control.
- Temperature indicators with sensors in each cell.
- Adjustable over and under temperature limits with alarm.
- Fixed over temperature fuses at 240 °C.
- Extruded aluminium blocks with channels for preheating the air.
- Separate flowmeters for each cell with needle valves, for
setting the air exchange rate.
- Air speed is low and is dependent of the air exchange rate only.
- Alarm for low air pressure.
- Built in air pump with microfilter for the air, which removes
99,99 % of all particles and vapours over 0,1 µm.
- Cooling channels in the casing for low surface temperature.
- Temperature controlled cooling fan for the electronics cabinet.
- Run-time meter
EB13 Similar in specification to the EB07 but with the added capability of running at either 3 to 20
or 100 to 200 air changes per hour. ASTM D5423 type 1 and ASTM D5423 type 2.
ELASTOCON reserve the right to modify this specification in part
or in whole
95-09
>>>
View the product on nortest.co.uk
Nortest
VACUUM OVENS VO
Careful drying of heat-sensitive materials in the vacuum
With short heating up times, high precision temperature control and turbo drying, the VO vacuum ovens show off all their power - at the same
time they treat heat- and oxygen-sensitive substances and materials with incomparable care. The direct contact between the load and the heatable and removable thermoshelves ensures rapid and equal heating up without thermal loss. Your decision criteria:
3 model sizes (29l, 49l and 101l)
State-of-the-art control technology based on the P performance class for all models
Anti-splinter, VDE-tested door construction for all models
Each of the maximum four (model size 29l: maximum three) insertable thermoshelves is equipped with a separate large area heating and its own sensors. The control circuits react precisely to differences in load and humidity. In this way all levels used remain equally at the predefined set temperature.
With the help of our model selection, you can find the right model for your needs, with dimensioned model sketches and extensive technical data for download. We are convinced that the flexibility and technical features of our appliances meet all possible needs. Put us to the test!
60 years of permanent development work, as well as numerous amounts of feedback from practical experience are embodied in each of our appliances:
The modular manufacturing concept in accordance with the principle of equal parts enables a highly varied and cost-effective series production
Almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
A wide range of options for programming and documentation using interfaces, Celsius software, integrated log memory and chip cards
Vacuum ovens are safety-tested and bear the signs
>>>
View the product on memmert.com
Memmert
RELAXATION TESTER EB 02
NORTEST-2007B
ELASTOCON-Relaxation, set & creep
Relaxation Tester EB 02
Stress relaxation testing in both
compression and tension
EB 02
Relaxation equipment for continuous
measurement in both compression and tension. Meets the
requirements in ISO 3384 and ISO 6914. The relaxation rigs are used in combination with the cell
oven EB 01 or EB 07 when testing at elevated temperatures.
Technical Specification, Relaxation Tester, EB 02
Range: ± 2000 N
alternative ± 200 N
Tolerance: ± 0,1 % of full range
Resolution: 0,5 N (0,05N)
Dimensions, dia x h: 120 x 450 mm
Weight: approx 4,5 kg
Material: stainless steel
Temperature sensor: PT 100, 1/3 DIN
The Equipment works with continuous stress relaxation measurements in both compression and
tension. The basic version can do tests according to ISO 3384.
The rig works together with the cell ovens EB 01 and EB 07.
- EB 021 Additional equipment for measurement in liquids, according to ISO 3384.
- EB 022 Additional equipment for relaxation in tension, according to ISO 6914.
- EB 023 Load Cell 200 N for tests in tension, including adapters.
- EB 024 Expansion Sleeve for good heat transfer in the cell oven.
- EB 025/4T Amplifier box with inputs for 4 load cells and 4 PT 100 sensors.
- EB 026 Multitasking software for PC-computer with data logging and analysis. Up to 16 EB 02
rigs and 4 EB 025 amplifier boxes can be connected in a network. The results are presented as
a graph with F/F0 against log time.
- EB 027 Software Junior with separate data logging and analysis.
Up to 16 EB 02 rigs and 4 EB 025 amplifier boxes can be connected in a network. The
results are presented as a graph with F/F0 against log time.
- EB 028 Room Temperature Box, 23°C, for testing at standard laboratory temperature. The box
can take 4 rigs.
ELASTOCON reserve the right to modify this specification in part or in whole.
95-09
>>>
View the product on nortest.co.uk
Nortest
