Selection of 40 products among
76
LAMINATE WORKTOPS - GETACORE®
GetaCore®: Both practical ...
GetaCore® is THE solid surface material from
WESTAG & GETALIT AG. Tangible functional advantages and its innovative, aesthetic appearance make GetaCore® an ideal
modern material for
work-tops. The surface is non-porous and very easy to clean and maintain. Corner connections can be designed with almost seamless joints - good for maintenance, pleasing to the eye.
GetaCore® can in principle be processed like solid
wood. For instance, the surface can be very finely sanded in a similar manner to wood parquet. The advantage:
minor traces of use or damage can be simply removed - and your worktop is as good as new.
… and emotive.
Light, colours and shapes influence the sensual
perception and wellbeing of people in nature and in the home. With GetaCore®, we have created a material which emulates these features. Its soft and smooth touch stimulates our sensual instincts.
Soft colours and configurations inspired by natural
stone combine to form harmonious decors. Transparent, mineral particles create a stimulating visual depth and underline the solid appearance of GetaCore®. In their design purity GetaCore® worktops provide a homogenous link to their surroundings and combine beautifully with wood, metal or textiles. Adaptability is in any case the strength of GetaCore®. 16 different decors make it easy to turn an interior design into a harmonious overall picture.
GetaCore®.
Harmony leads to happiness.
>>>
View the product on actoon.co.uk
A C Toon
SEL SOURCE CONTROL DRAINING SYSTEM
The SEL Source Control System is a complete Sustainable Drainage System (SUDS) that has been developed in line with current guidelines as set out by CIRIA, the Environment Agency and SEPA.
What are
SUDS?
The main design principle of the System is Source Control, a cornerstone of good Sustainable Design.
Why Source Control?
The System provides either infiltration or attenuation, incorporating multiple stages of water treatment and flow control within the constructed layers of car parks and other hardstandings, directly beneath the finished surface.
Overview of the SEL Source Control System when used to provide infiltration
Overview of the SEL Source Control System when used to provide attenuation
Key Features
Complete Source Control SUDS solution for new build or retrofit development
Replaces Oil Separators as defined by PPG3 (Pollution Prevention Guidelines)
Six stages of water treatment available within the system
Provides treatment at source by gravity separation and bio-degradation of oils and silts
Provides attenuation or infiltration at source
Replaces sub-base, minimises the requirement for imported aggregate
Shallow construction, minimises residual excavated material
Contributes to BREEAM ratings
Satisfies designers’ risk assessments in accordance with CDM
Reduces the requirement for chambers and pipes
Improves water quality
A practical solution for the retrofit of SUDS components into existing drainage schemes
SEL Permavoid® and other system components are manufactured from recycled material and are also recyclable and reusable
Resistant to frosts, salts and hydrocarbons
Dealing with the collection, initial treatment and control at source of rainwater runoff from roofs is an integral part of the surface water drainage design.
Solutions for Roofs
The SEL Source Control System can be installed in a variety of configurations using different types of surfacing.
Typical Configurations
The SEL Source Control System consists of a full range of components enabling you to design a fully integrated SUDS solution.
System Components
Technical Services
To support architects, engineers and contractors in designing and installing the SEL Source Control System, our Design Services Department offers computer aided scheme design, hydraulic performance calculations and advice on installation. Supply and install packages are available for elements of the system – information available on request.
>>>
View the product on allpipe.co.uk
Allpipe Ltd
BLUE MARLIN FILTER - DRAINING SYSTEM
The Patented Blue Marlin Filter is a seawall erosion control drainage system.
It is used in both new and retrofit applications in seawalls, retaining walls, bulkheads, shoring and erosion control
structures. Designed and produced by a Marine Contractor, the Blue Marlin Filters are a great compliment to APE’s range of Plastic and composite piles.
The Blue Marlin Filter System is unique in its design to prevent erosion of backfill materials, caused by transport of the fill material fines through the wall’s weep holes and/or panel seams. The hydrodynamic pressure of perched water and seepage water causes loss of landfill without the proper erosion control system.
The Blue Marlin Filter System relieves this pressure and has an unlimited design life. Blue Marlin’s filter is also designed for both new and existing seawalls, retaining walls and bulkhead walls
New Applications
In new applications, the system may be installed at the time of the construction of the wall. The location of the Blue Marlin Filter System may be chosen by the designer of the wall to best serve the purpose of relieving the hydrostatic and hydrodynamic pressures on the wall. This relief is important in that the design of most wall systems do not anticipate that the wall will be subject to pressures from perched or trapped water behind the wall in the backfill material. The Blue Marlin Filter is a two component system consisting of an ABS plastic cylinder permanently installed seawalls/bulkheads and a replaceable filter element tube which can be inserted, locked in and removed for replacement purposes by the filter assembly tool.
>>>
View the product on miniape.com
APE Plastic Piling
HELITIE WALL TIES
HeliTie Wall Ties are manufactured from Grade 304 Cu corrosion resistant stainless steel and are helical along the whole of their length with no, one or two points. They are available in diameters
of 8mm and in lengths between 180mm and 300mm. Grade 316 is also available. They are supplied in boxes of 100.
HeliTie Wall Ties are used in new build and remedial applications to bond the two leafs of brickwork together.
Quick Link to New Build Application
Remedial Application
Features
Benefits
Size of HeliTies Required
Tooling
Tooling Sequence using PST3
FlexiClip
Sock
Movement Joint Application
Guidelines and Tips
Like HeliTie Roof Fixings, HeliTie Wall Ties provide a competitive cost effective solution combined with high performance. This is due to their shape, the variety of diameters and lengths available and their speed and ease of installation.
Features Benefits
Strong no-bend 8mm helical stainless steel HeliTie.
Grade 304 corrosion resistant stainless steel (Grade 316 also available).
Simple, one piece design.
Multi-drip along full length of tie.
HeliTie Wall Ties elminate the need for grouts, resin or mechanical devices in normal substrates.
Can be installed in cavity or solid masonry constructions.
HeliTies can be inserted into loose substrates with the aid of resin or grout, eg as sock ties into Hollow Blocks (pots).
Tested and proven technology.
Perfect pitch engineering so that excellent pull-out test figures are attained.
Recommended by leading block and insulation manufacturers.
Meets requirements of NHBC.
HeliTies to DD140 Type 2.
Latest Certification based on the DIN NORM 1053 from the DIBT (Deutsches Institut fur Bautechnik) [Euro Code].
Resistant to the passage of sound Part E.
Cost effective.
Ideal for thin-joint blockwork.
Extremely quick and easy to install.
Can be used in bricks, blocks (including hollow blocks), aircrete, concret, hard mortar and timber.
Can be installed close to the edge of masonry or timber.
No need to pre-drill in autoclaved blocks.
Does not impair thermal properties of insulation, simply hammer in the HeliTie through the insulation into the block.
Minimal disfigurement to structure.
Minimal disruption to residents.
Restrains brickwork whilst allowing the natural movement of the construction.
Ideal where the joints of the inner and outer leaves of masonry do not course.
Pull out testing of HeliTies can easily be carried out on site after installation to ensure Structural Engineer's satisfaction.
Hand and high quality power support tools available to speed installation - PST2 (professional) or PST 3.
HeliTies offer an adaptable solution combined with high performance.
>>>
View the product on helicalsystems.co.uk
HELICAL SYSTEMS LTD
LAMINATE WORKTOPS - GETALIT
The excellent technical properties
of Getalit® HPL join forces with a perfect appearance to create a material of excellent quality.
A Getalit® worktop is a real quality product which can stand up
to almost anything: extremely impact and scratch resistant, light fast, resistant to stains and, what’s more, to common household chemicals. The surface is even impervious to boiling water, wet or dry heat, cigarette ash and short-term exposure to hot saucepans at temperatures up to 230° C. These excellent material and technical properties are laid down in the European standard
DIN EN 438 - a guarantee for lastingly beautiful and hygienic worktops!
Getalit®: A great concept ...
It’s as simple as that!
Care instructions and quality features. Getalit® - HPL worktops are
extremely easy to look after:
When slightly soiled wipe with a damp cloth.
When more heavily soiled, warm soapsuds or a commercial cleaning agent help. Don’t use any abrasive, acid-containing or scouring agents!
Remove stubborn marks like paint and glue residues, ink, felt-tip with an organic solvent (e.g. spirit, acetone, petrol).
First remove any paraffin or wax mechanically (avoid scratches!), iron off any residues with blotting paper.
Wax polishes should never be used!
Specification
E1, one side and front edge faced with 0,7 mm “Getalit®” HPL (Brilliant gloss version with 1,2 mm), one long edge postformed, adhesive quality on all surfaces D3 to EN 204. Reverse side and rear edge protected by moisture resistant kraftpaper. Water-resistant seal at joint
Worktop with 38 mm chipboard substrate
Type:
Standard surface finishes
AF 40/133 TRI Line Profile
AF 40/111 Brilliant gloss Finish
Thickness: 40 mm (nominal)
4100 x 600 mm single postformed
4100 x 650 mm single postformed
4100 x 670 mm double postformed
4100 x 900 mm spf or dpf
4100 x 1200 mm spf or dpf
Sizes:
AF 40/133
AF 40/111
along front edge.
The appeal of “Getalit®” worktops lies in their
... for individual kitchen design
intelligent layering in the HPL process. The abbreviation HPL stands for High Pressure Laminate - decorative laminated boards according to the European standard DIN EN 438. They offer extraordinary stability, excellent finish and an enormous range of decors. Kraft papers impregnated with phenol resin as the load-bearing core, a decor paper impregnated with melamine resin and the overlay are layered on a substrate. Heat, pressure and resins melt them into an in-separable unit. The kraft papers impregnated with resin give the worktop its special stability whereas the overlay protects the decor print. Structure-giving plates lend the decors the most varied surface structures.
Functionality is a good thing - and even better
Functionality with a sensual dimension
when it's pleasing to the eye. Getalit® turns this claim into reality: glossy or polished surfaces create an attractive appearance full of light and colour. Fascinating decors fit in harmoniously with their surroundings and can be used as a style or fashion statement. Stone reproductions with natural veins, imaginative decors of bubbling individuality or warm wood reproductions - this is where adaptability becomes homogeneity.
The unique character of Getalit® really comes
Getalit®.
Layer by layer to a quality product
into its own when you touch it. Unusual shapes and a perfect finish are further dimensions to the quality of the decor for your very own interior.
Website designed by Zicom Internet © A.C. Toon Ltd. All rights reserved.
Graphic Design by Gallagher Design - All trademarks acknowledged - (E&OE)
>>>
View the product on actoon.co.uk
A C Toon
REINFORCING BAR
CELSA 500C is a hot rolled, ribbed steel bar, for use in the reinforcement of concrete.
The steel is melted in an electric arc furnace, continuously cast into billets, and rolled to final
size.
Final properties are achieved through the quenched self tempered accelerated cooling process.
CELSA 500C exceeds the requirements of BS 4449: 2005 Grade 500B, and is fully weldable.
CELSA 500C reinforcing steel bars are available in all BS 4449: 2005 preferred sizes, from 8 to 40 mm.
Length
Standard lengths: 12, 14, 15 m.
Special lengths, from 6 to 18 m, are available by prior order.
Length tolerance: -0 +100 mm.
Ductility properties
Stress ratio (ft/fy) (min.): 1.15
Elongation at fracture (A5) (min): 16%
Total elongation at maximum force (Agt) (min.): 7.5%
Fatigue requirements fulfilled (BS 4449: 2005)
Mechanical properties
Yield strength Re (charact.)
500 MPa
Rebend Satisfactory
(BS 4449:2005)
Bar geometry and rolling marks
CELSA 500 C bars have two rows of transverse ribs, forming a double angled rib pattern. There is no longitudinal rib.
CELSA 500 C bars are designed to meet the bond requirements of BS 4449: 2005 and Eurocode 2.
>>>
View the product on celsauk.com
CELSA STEEL
LAMINATE WORKTOPS - TEXWOOD
Texwood is the name given to a range of high quality solid wood panels, produced in Italy to our specification, kiln dried and ready for fabrication and finishing here in the UK.
Texwood®: Precision
Craftsmanship
The production method is a process of careful monitoring, combining a mixture of old fashioned skills and new computerised state of the art equipment.
Our current stock consists of ASH, BIRCH, CHERRY, EUROPEAN MAPLE, IROKO, NATURAL BEECH, STEAMED BEECH, OAK, WALNUT, SAPELE & TEAK. These timbers are sourced in Italy or from other countries that have sound forestry policies such as the USA. No timbers from South America are included in our portfolio. Texwood has become THE product we are all pleased to be associated with, especially with regards to ecological issues.
The nature on its species
Texwood is available in an extensive range of hardwoods, produced in a variety of standard panels measuring upto 4000x1220mm and in thicknesses ranging from 26 to 42mm. Each panel is carefully checked and approved to ensure that any imperfections are specially treated and corrected by hand, guaranteeing a final product that is technically and aesthetically perfect.
The entire Texwood range is also available in two different widths of stave, in narrow 20mm strips and wider 42mm.
Gluing: DIN EN 204-D3
Formaldehyde according to E1 laws
KITCHEN WORKTOPS
Upon request kitchen worktops can be produced with a rounded or profiled front edge. Thickness, lengths, widths and type of rounded front edge are subject to manufacturers tooling.
Website designed by Zicom Internet © A.C. Toon Ltd. All rights reserved.
Graphic Design by Gallagher Design - All trademarks acknowledged - (E&OE)
>>>
View the product on actoon.co.uk
A C Toon
