Force sensors: suppliers, wholesalers and manufacturers on Hellopro
Search   


Force sensors :

57 products
Select the category
Selection of 41 products among 57
FORCE SENSORS FSS

FORCE SENSORS FSS
The FSS sensors offer precision force- sensing in miniature SMT housings. Based on proven silicon sensing technology, the FSS Series utilises a specialised piezoresistive micro-machined silicon-sensing element. The low power Wheatstone Bridge sensing circuit provides stable linear mV outputs over the 1500 gram force range. Typical applications include medical equipment control (e.g. kidney dialysis machines, drug delivery systems or medical instrumentation), ultra-low displacement sensing in robotic end-effectors (e.g. pinch force control), wire bonding equipment and high-precision force sensing such as variable tension control or material testing. >>>
View the product on haleinst.com Hale Instruments Ltd
COMPRESSION FORCE SENSOR SERIES SBC

COMPRESSION FORCE SENSOR SERIES SBC
Button sensor for compressive loads of up to 10,000 lb. Compact and rugged, the SBC is ideal for heavy duty applications with space constraints. Member of the BGI family of interchangeable sensors "Personality module" holds all calibration and configuration data Small size Stainless steel construction NIST-traceable certificate of calibration included Accuracy: ± 0.5% of full scale ±1 digit + BGI Weight: 0.4 lbs (0.2 kg) Warranty: 3 years >>>
View the product on mark-10.com Mark-10
ELECTRONIC FORCE MEASUREMENT - LOADLINK PLUS

ELECTRONIC FORCE MEASUREMENT - LOADLINK PLUS
The original electronic force measurement device with integral display. In production since 1979, this load link plus is the latest version of this world renowned product. All load link plus have -Push button control for: tare, units (kg, lbs, kN & tonnes) Peak hold Preset tare Audible setpoint alarm Overload counter. Remote RS422 output is fitted as standard, this will allow connection to our range of handheld displays or software. All load links are supplied with carry/storage case. >>>
View the product on straightpoint.com STRAIGHTPOINT
TENSION AND COMPRESSION FORCE SENSOR SERIES SS

TENSION AND COMPRESSION FORCE SENSOR SERIES SS
A rugged force measurement sensor for tensile and compressive forces up to 10,000 lb. Durable S-Beam architecture allows for many applications and setups. Solid steel construction ensures many years of use in factory or laboratory environments. Member of the BGI family of interchangeable sensors "Personality module" holds all calibration and configuration data Measures tensile and compressive forces NIST-traceable certificate of calibration included Accuracy: ± 0.15% of full scale ±1 digit + BGI Weight: From 1.9 lbs (0.9 kg) to 3 lbs (1.4) Warranty: 3 years >>>
View the product on mark-10.com Mark-10
MINIATURE FORCE SENSORS SERIES SJR

MINIATURE FORCE SENSORS SERIES SJR
Extremely compact force measurement sensor for tensile and compressive loads in applications with limited space. The Series SJR is available in capacities from 0.25 lb to 100 lb (1 N to 500 N). Every capacity has the same miniature dimensions. The sensors feature outstanding mechanical overload protection and threaded holes on two sides for the mounting of attachments or implements Member of the BGI family of interchangeable sensors "Personality module" holds all calibration and configuration data Ultra-compact size Measures tensile and compressive forces NIST-traceable certificate of calibration included Accuracy: ± 0.2% of full scale ±1 digit + BGI Weight: 0.015 lbs (0.007 kg) Warranty: 3 years >>>
View the product on mark-10.com Mark-10
PREMIUM FORCE GAUGES SERIES BG

PREMIUM FORCE GAUGES SERIES BG
The Series BG Digital Force Gauge is an advanced force measurement solution, with sophisticated measurement capabilities, data outputs, computer control capabilities, and a long list of features and configurable settings. The BG can stop motorized test stand travel at user-selectable set points, and can also prevent force overload (when used with the ESM motorized test stand). Go / no go testing can also be accomplished with an optional plug-in hi / lo limits indicator. Compatible with all Mark-10 test stands and grips. RS-232, Mitutoyo and analog outputs GCL-Gauge Control Language for full computer control Automatic timed output on RS-232 Dual set points with outputs Averaging mode for average readings over time External trigger for contact or switch testing and data capture General purpose I/O for external device control Programmable analog and digital filters Selectable units of measurement Programmable default configuration Peak memory for tensile and compressive forces Push-button calibration Battery or AC operation Programmable automatic shutoff Reversible aluminum housing for handheld use or test stand mounting (see below) Same housing size for all capacities Accuracy: ± 0.2% of full scale ±1 digit Sampling rate: 65 readings/sec Safe overload: 150% of capacity Battery life: 8-10 hours per charge Weight: 0.9 lbs (0.4 kg) Environmental requirements: 40°F - 100°F [5°C - 45°C], >>>
View the product on mark-10.com Mark-10
TENSION AND COMPRESSION FORCE SENSORS SERIES SSM

TENSION AND COMPRESSION FORCE SENSORS SERIES SSM
Force measurement sensor for tensile and compressive loads in a wide variety of applications, available in capacities from 0.25 lb to 100 lb. Thread on two sides can accept a variety of hooks and implements, making this sensor particularly well suited for inline tests. Member of the BGI family of interchangeable sensors "Personality module" holds all calibration and configuration data Rugged aluminum housing Measures tensile and compressive forces NIST-traceable certificate of calibration included Accuracy: ± 0.15% of full scale ±1 digit + BGI Weight: 0.4 lbs (0.2 kg) Warranty: 3 years >>>
View the product on mark-10.com Mark-10
AREA MASS SENSORS

AREA MASS SENSORS
Cupping Press Modulation Stable Conveyor Conditions Conveyor Pressure Control Conveyor stability is vital for today’s lightweight cans and high speedmachinery. The AMS monitors cup accumulation on the cupping press discharge or distribution conveyor. The AMS analog output is used to regulate the cupping press' variable speed drive, adjusting the rate of press strokes based on cup demand. The AMS enables complete control, creating optimum conveyor conditions and accumulation space as well as minimum can pressure >>>
View the product on sencon.net Sencon
LCR LOAD CELL / ROLL ASSEMBLY

LCR LOAD CELL / ROLL ASSEMBLY
Installation of an LCR assembly into can be a quick and easy key to proper tension control. The Montalvo LCR Load Cell / Roll Assembly continuously measures tension in your moving web. The LCR is manufactured to your specifications using a lightweight aluminum extrusion, which is ideal for low start-up inertia, and the best tension sensing technology available today. It is available with extra low drag, maintenance free bearings and is 3-D dynamically balanced for speeds up to 1500 fpm. A wide variety of load ranges, mounting options and roll finishes to fit virtually any application are available. See the datasheet / worksheet for details >>>
View the product on montalvo.com/ Montalvo
HAND HELD

HAND HELD
Because of its technology integration, FLIR Government Systems is uniquely capable of providing high performance, light-weight, low power sensors for handheld applications. Core technologies such as low power cryo-coolers, optics, lasers, and detectors are all in-house, and allow FLIR to integrate them into systems that are lighter, run longer, and see farther to provide the maximum total operational effectiveness. >>>
View the product on flir.com FLIR Systems International
DIGITAL TORQUE METER HDP SERIES

DIGITAL TORQUE METER HDP SERIES
HIOS Instruments Are The World Standard Equipment ? Up to 100 data measurement can be stored in memory at a time. ? Can be checks maximum, minimum and average torque measurement. ? Torque value display can be automatically reset to zero. ? Automatically recalibrated to zero value. ? First peak measurement mode (F.PEAK) gives precision measurements of torque wrenches or manual driver. ? An input tool is available to make possible transfer of measurement data to a computer. ? Comes with an AC adapter that can be used with 100 - 240 volts power sources. Runs on an environment -friendly nickel- hydrogen battery. >>>
View the product on hios.com HIOS
DIGIFORCE

DIGIFORCE
The Digiforce is a portable, battery-operated instrument which utilises a non-contact technique to measure tension in wire, strand, cable and rod without intrusion. It operates on the principle that when a tensioned component anchored between two points is struck, it vibrates at a frequency which is related to its tensile stress. When held in close proximity to the vibrating member, the Digiforce detects the frequency of vibration and computes it to a force value on the digital display. It is quick and easy to use, needing only two pieces of information to be entered on the keypad; the length of the component between its fixed points and the component weight in grams/metre. Accurate to 1% Non-contact measurement Portable and battery powered CE marked and EMC approved Internal data-logging with RS232 serial output Applications: Pre-stressed concrete fabrication - Elevators - Mast support stays Yachting - Power lines - Winching - Mooring - Aerial ropeways Mining - Crane construction - Drilling >>>
View the product on appmeas.co.uk Applied Measurements Limited
FRICTION & WEAR TM - MM-W1A

FRICTION & WEAR TM - MM-W1A
Product info: Application: The vertical universal friction and wear testing machine model MMW-1, is designed to develop all kinds of medium and high grade hydraulic oil and evaluate inspection testing machine, and the application and function is similar to FALE No. 6 multi-function testing and measuring testing machine. This machine is standard testing machine to evaluate anti-wear character for lubrication grease or oil with ASTM D 4172-82, ASTM D 2266-81. And also is standard apparatus for evaluating oil, with hydraulic lubricant, anti-friction character in general petroleum and chemistry industry Corporation. With XBE34007-87. the above method is used four ball friction couple measuring relative anti-wear character for lubrication agent under the special testing condition. It is widely used in developing anti-wear hydraulic oil products. The condition is as follows: The testing machine is used step washer friction couple to material for measuring wear rate under the condition of oil auto-lubricating contact, and used to measure friction factor, so as it is as standard evaluating testing machine. The machine can be operated with rolling sliding or combination of rolling-sliding moment in certain contact pressure. The machine can be operated with pluse stepless regulating system, and evaluated the friction and wear character of lubricant, metal, plastics, coating, rubber, ceramic, such as fiction character of low speed pin-disc, and long term anti-wear character of four balls and rolling contact fatigue of, four balls and lubrication character of ball-bronze three PCS bushing, and friction character of tape-pin three spindle and combination friction character of simulated gear and cam, and step washer, ball disc, mud wear, and the testing lubrication friction character of lip moment and stick sliding. The testing machine model MMW-1 is used in tech. Fields of all friction science, such as petroleum chemical industry, mechanism, power source, metallurgy, space light field, university, institute etc. Main Tech. Parameters: Test load: Working range (stepless) of axle testing load: 10-1000N The relative error of testing load value:1% Zero point sensory of testing load value:1.5N Auto loading rate of testing force: 400N/min The relative error of testing load long term auto keeping value:1% Friction moment: Max measuring friction moment: 2.5N M Relative error of friction moment value:2% Friction loading sensor: 50N The distance of friction force arm: 50mm The stepless regulation range of main spindle pluse value: Single class stepless regulation system: 1-2000rpm Special decreasing speed system: 0.05-20rpm Spindle rotating error:1% Testing agent: Oil, water, mud, grinding material etc. Testing machine heating system. Working range of the heating unit: room temp~200 Disc mode heating plate:65, 220V, 250W Sleeve mode heating unit:68 x 44, 220V, 300W 3.double group exput platinum heat resistance: R0=100group exput platinum heat resistance: 0.1> (Long, short, one for each) Temp. Control accuracy:(0.3 + 0.005 ) (Red "t" denotes testing temperature) Main spindle taper of testing machine: 1:7 Max distance between the main spindle of testing machine and lower assistant disc: large than 75mm Main spindle control of testing machine: Manual control Time control Rotating speed (period) control Friction moment control Testing machine time display and control range: 10s~9999min Testing machine rotating speed display and control range: 1~99 x 105 Max export moment of main motor of testing machine: 5Nm Overall dimension of testing machine: 860mm x 740mm x 1560mm Net weight of the testing machine: 650kG Main accessory and special accessory of testing machine Accurate rapid double pen auto record apparatus Friction load ¨C time curve of auto recording and temp ¨C time curve. All travel accuracy:0.25% Sensitivity: 5Mv/cm Recording pen speed: 1000mim/s Enlarge multiple of the measure microscope: 25X, 100X. Wear measure system Wear measure range: 0-10mm Accuracy in wear measure range:0.001mm Resolving rate of digit meter in wearing: 0.001mm >>>
View the product on timegroup.com Beijing TIME High Technology Groupe - Time Group Inc
LOAD CELL COMPRESSION CPA

LOAD CELL COMPRESSION CPA
CPA High Range Column Compression Load Cell * Ranges 2 tonne to 1000 tonne * Stainless Steel Construction (Carbon Steel version also available) * Environmentally Sealed to IP67 * Many special design versions available * Can be supplied with domed top and spherical loading cap * Versions available for use as calibration standards * Can be supplied with amplified output * Can be supplied with integral connector >>>
View the product on lcmsystems.co.uk LCM Systems Ltd
COMPRESSION LOADCELL - LOADBLOCK PLUS

COMPRESSION LOADCELL - LOADBLOCK PLUS
With integral display, used in many testing and load monitoring applications worldwide All LBP's have push button control for: tare, units (kg, lbs, kN & tonnes), peak hold and offset adjustment. Remote output buffer is fitted as standard, this will allow connection to our range of accessories. All LBP's are fitted with an adjustable setpoint audible alarm as standard. Protection IP65 / NEMA4 Battery Type 9v PP3 Battery Life 50hrs Continuous Display Type 25mm LCD Operating Temperature -10c to +50c Accuracy +/- 0.3% of applied load >>>
View the product on straightpoint.com STRAIGHTPOINT
ROTARY TORQUE TRANSDUCERS - M420

ROTARY TORQUE TRANSDUCERS - M420
Industry standard torque transducer with rotary shaft and static body. The latest technology Datum Electronics Series M420 non-contact rotary torque transducers have been designed to fit with most applications and solutions requiring rotary torque measurement. The torque transducer fits inline with the drive train or test bed, using standard keyway shafts. A non-contact transmission system provides a digital USB output directly proportional to torque, in this variant it is supplied as a complete transducer with bearings to support the stator unit on the rotating shaft. It is suitable for most general test rig applications. The M420 torque transducer utilises a strain gauged shaft for accurate and reliable torque measurement and a set of rotating on shaft conditioning electronics, the digital signals are transmitted to the non-rotating part of the system or stator providing a reliable and highly accurate torque measurement solution. M420 Torque Range Complete Torque Transducer Designed to be mounted in line with the drivetrain Torque Transducer body supported on rotary shaft with bearings Ideal for test rig applications Keyway shaft for easy fit and rig design Torque Measurement available from 0 – 10,000Nm Analogue Output available Specifications Accurate On Shaft Torque Measurement Flexible shaft fittings (Keyway) Modular System Assembly Non-contact Signal Transmission Proven Technology Low Maintenance Simple Linear Calibration Engineered to fit most drive components Rotary and Static Torque Measurement Optional Analogue Data Output LABVIEW compatible >>>
View the product on datum-electronics.co.uk Datum Electronics Ltd
COEFFICIENT OF FRICTION TESTER

COEFFICIENT OF FRICTION TESTER
Coefficient of Friction Tester Coefficient of Friction Tester for Accurate Measurement of Static and Kinetic Coefficient of Friction The Lloyd Instruments FTPlus coefficient of friction tester accurately measures static and kinetic coefficient of friction. These values are of importance in a wide range of industries including blown film, plastic sheet, paper, packaging and coating manufacture. The FTPlus is a stand alone friction tester conforming to the requirements of ASTM D1894, ISO 8295 and TAPPI T549. The tester is supplied with these three standards pre-programmed, with a total of ten set-ups available for custom configuration. When using NEXYGENPlus material test and data analysis software , the FTPlus may also be configured as a universal material tester to perform tensile, compression, flexural and other mechanical tests up to 1 kN (225 lbf). >>>
View the product on lloyd-instruments.com Lloyd Instruments Ltd.
CAN COUNTING SENSORS

CAN COUNTING SENSORS
Counting cans is beyond the ability of standard inductive or optical sensors. The round shape of a can, plus the inherent shaking and reversing of cans that occurs on the line leads to serious counting errors. An inaccurate count can be worse than no count at all. These problems are eliminated by Sencon's can count sensors which are specially designed for highly accurate and reliable counts on canmaking lines. They allow precise production and/or spoilage data monioring with 100% confidence. >>>
View the product on sencon.net Sencon
DIGITAL TORQUE METER HM SERIES

DIGITAL TORQUE METER HM SERIES
HIOS Instruments Are The World Standard Equipment. ? HIOS instruments are the world standard equipment. ? According to the change of size unit, you can use 3 units of ibf?in??kgf?cm??N?m ? You can measure easily CW(clockwise rotation), CCW(counter clockwise rotation) ? You can understand exactly due to maintaining and indicating torque value at peak ? Data output and analogue output are standard spec. ? You can carry with it conveniently due to small size, light weight, and charging type ? You can use for long hours due to power saving function(100 hours in power saving) >>>
View the product on hios.com HIOS
TORQUE TRANSDUCERS

TORQUE TRANSDUCERS
Our range of torque transducers includes both static and rotary types based on strain gauge technology. Square drive and flange connections are available as standard, with alternatives available to exactly suit your application as required. We also offer non-contact devices for high rpm and continuous use applications. Ranges from ±0-0.5 Nm to 0-100kNm Static or rotary (slip ring or non-contacting) Accuracy to >>>
View the product on appmeas.co.uk Applied Measurements Limited
SPRING TENSION-COMPRESSION MACHINE

SPRING TENSION-COMPRESSION MACHINE
Product info: They are used for tension-compression, torsion, fatigue, sorting and strength test of various kinds of springs, I.e. helix spring, worm spring, papilionaceous spring etc. TL Series:30N-5000N 8 kinds of specifications. Displayed on dial. Displacement is indicated by scale. TLS Series: 1N-30kN 18 kinds of specifications. Test load is displayed by LED digital indicator. Displacement is indicated by scale. TLS-S Series: 1N-30kN 18 kinds of specifications. Test load & displacement are displayed by LED. Multi-points auto collection, multiple testing mode, calculating section rigidity, printing test report. TLW Series:500N-30kN 10 kinds of specifications. Microcomputer control, Win 98 Chinese interface, Chinese menu dialogue, multiple testing modes, storage approx. 100 kinds specifications of springs, optional velocity, stable performance. >>>
View the product on timegroup.com Beijing TIME High Technology Groupe - Time Group Inc
DIGITAL TORQUE METER HP SERIES

DIGITAL TORQUE METER HP SERIES
For a management of driver Torque ? Up to 100 data measurement can be stored in memory at a time. ? Can be checks maximum, minimum and average torque measurement. ? Torque value display can be automatically reset to zero. ? Automatically recalibrated to zero value. ? First peak measurement mode (F.PEAK) gives precision measurements of torque wrenches or manual driver. ? An input tool is available to make possible transfer of measurement data to a computer. ? Comes with an AC adapter that can be used with 100 - 240 volts power sources. Runs on an environment -friendly nickel- hydrogen battery. >>>
View the product on hios.com HIOS
SW-SERIES COMPACT LOAD CELLS

SW-SERIES COMPACT LOAD CELLS
SW Series load cells are suitable for idler or live roll applications and are available in three sizes, each offering a variety of load ratings. They are full-bridge foil gauge load cells suitable for tissue to board tension sensing. SWs may be mounted directly to a machine frame or they may be foot mounted. Their compact design and through-shaft capability make them a good choice for custom applications. >>>
View the product on montalvo.com/ Montalvo
ELECTRIC TOOLS SB SERIES (TAPPER)

ELECTRIC TOOLS SB SERIES (TAPPER)
It is an excellent tool that prevents tap break in advance and catches over load by attaching automatic inversion instrument It is a tapping tool to put a tap into part material that is drilled a hole downward in advance. According to work condition, please use Cord Type or Rechergeable. Cord Type is used by combining exclusive power source SBT-50. ? In case that over load is added to tap and downside hole diameter, it catches automatically overload to return, which prevents loss on tap. Not to speak of clogged hole or opened hole, if you put a tap with proper depth, it comes off automatically rotating reversely, which improves efficiency. ? You can control the depth of putting a tap at will. Because there is not discordance of rotation by sending pressure and returning pressure when putting a tap, you have nothing to worry about precision loss of screw and tap break. >>>
View the product on hios.com HIOS


12Suivant >>Fin >
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Measuring devices, analysis and sensors