Filetage (translation in progress): suppliers, wholesalers and manufacturers on Hellopro
Search   


Filetage (translation in progress) :

781 products
Select the category
    Selection of 40 products among 781
    CONDENSATE PUMP - EE 1650M

    CONDENSATE PUMP - EE 1650M
    Pump with integrated float switches and tank. Technical Data Pump unit (L x W x H): 244 x174 x144 mm Electrical spec.: 230V. 50/60Hz, 40VA Alarm switch: 230V, 8A (ohmic load) NO/NC (normally open/ normally closed) max. flow rate: 32 l/h max. delivery height: 15 m Tank capacity: 2 l Start: 40 ± 2mm* Stop: 30 ± 2mm* Alarm: 52 ± 2mm* *Dimensions specified from the mounting surface Usage This compact unit with integrated float switch is designed to be used inside devices equipped only with a condensate collecting tank such as fan convectors, cabinet models, built-in units, water collection consoles… Steps must be taken to ensure that no fluid runs over the pump! Description The delivery system is equipped with 2 separately operating float switches. The working float switch turns the pump on and off depending on the filling level (with run-on time). The function of the alarm float switch is to isolate the break contact element >>>
    View the product on eckerle.com Eckerle Industrie- Elektronik Groupe - Eckerle
    CENTRIFUGAL PUMPS

    CENTRIFUGAL PUMPS
    FTI centrifugal pumps are constructed from rugged, corrosion resistant materials including heavy gauge stainless steel and plastics specifically engineered for maximum corrosion resistance. Pumps are available in either vertical or horizontal configurations, either mechanically sealed or magnetically coupled for sealless operation. Mag drive pumps feature high-powered, rare earth magnetic couplings which allow the transmission of maximum horsepower. >>>
    View the product on finishthompson.com Finish Thompson
    F SERIES CHEMFLO VIRGIN AND ANTI-STATIC PTFE PUMPS - K STYLE

    F SERIES CHEMFLO VIRGIN AND ANTI-STATIC PTFE PUMPS - K STYLE
    A solid block of virgin or anti-static PTFE housed completely inside an outer metal ‘Pressure Vessel’ of carbon or stainless steel gives inherent safety whilst retaining ‘one nut’ maintenance.Used for extremely hazardous acids and chemicals where only PTFE can be used and often in pilot plants or as emergency pumps where chemicals are unknown.The ultimate solid PTFE Double Diaphragm Pump.A 90º PTFE-lined elbow will fit between the pump legs as shown.(This part can be supplied by Flotronic if required).Max operating temp 121ºC (250ºF) with high temp diaphragm (specify H as 6th digit in pump code) >>>
    View the product on flotronicpumps.co.uk Flotronic Pumps Ltd
    CHTA BETWEEN BEARING, RADIALLY SPLIT, MULTISTAGE BARREL PUMP

    CHTA BETWEEN BEARING, RADIALLY SPLIT, MULTISTAGE BARREL PUMP
    Brands: IDP Applications: Brine Injection, Boiler Feedwater, Descaling, High Pressure Water Injection, High Temperature Service, Power Generation, Pipeline, Utility Industries: Boiler Feedwater Systems, Boiler Feedwater Systems, Pressurized Water Reactors - Non-safety Standards: Misc: Diffuser Style Construction features an internal casing comprised of segmented stage elements and a heavy-duty, forged barrel with discharge cover that incorporates ASME Section VIII design criteria. Precision Cast Diffusers minimize bearing spans and are 100% NDE inspected. Tandem Impellers are precision cast of high quality chrome steel to promote high efficiencies and cavitation resistance. Forged and Hardened Balance Drum and Sleeve balance thrust loads at all operating points. The drum is located as close as possible to the outboard bearing to minimize the effect of shaft deflection. Self-Aligning, Double-Acting Tilt-Pad Thrust Bearings are conservatively rated to carry axial loads that may be encountered during transient operating conditions. Features: Three element tapered land sleeve type (tri-land) radial journal bearings Serrated running fits Renewable casing rings and sleeves Flanged balance drum design Chrome plated shafting under journal bearings Ground forged steel shafting Operating parameters Flows to 5225 m3/h (23 000 gpm) Heads to 4300 m (14 000 ft) Pressures to 450 bar (6600 psi) Temperatures to 250°C (480°F) Speeds to 7000 rpm >>>
    View the product on flowserve.com Flowserve Flow Control
    1DV/2DV (1 1/2

    1DV/2DV (1 1/2" & 2" ) SEWAGE PUMP
    Features and Benefits 1 1/2 and 2" Discharge on 1/2 and 3/4 hp and larger 1 3/8" solid size on 1/2 HP; 2" solids on 3/4 HP and larger AISI 304 SS Casing and Impeller Capacities to 130 U.S. GPM Continuous Duty Rated, Non-Overloaded Motor Vortex Design AISI type 304 SS Impeller Total Heads to 39 Feet Applications Dewatering Applications Homes and Farms Industrial Treatment Systems Mobile Home Parks and Motels Municipal Package Systems Schools and Hospitals >>>
    View the product on goulds.com Goulds Pumps Groupe - ITT Corporation
    HEAT PUMP - COMFORT SERIES 18 KW

    HEAT PUMP - COMFORT SERIES 18 KW
    Freedom of choice where it should be installed. The heat pumps series WPL feels right at home, inside and out. Their robust casing and the special hood for external installation enables the WPL to perform equally well in the garden or the yard. The quiet heat pump operation excludes almost any noise pollution, making it possible to install it, for example, in the cellar. The Air |Water heat pump delivers heating power from a compact design. Even at temperatures as low as -20 °C, the WPL can still yield sufficient thermal energy from the outside air. An electric booster heater makes sure that there is enough heating if required. The lower the required flow temperature, the higher the heat pump efficiency. Accordingly, the system is particularly recommended for low temperature or underfloor heating systems. The most important features For internal or external installation Also ideal for use in older buildings Five output sizes High coefficient of performances Extremely quiet operation Integral electric booster heater >>>
    View the product on iceheating.com Ice Heating Ltd
    CENTRIFUGAL ELECTRIC PUMPS IN COMPLIANCE WITH EN 733 - DIN 24255 - FH

    CENTRIFUGAL ELECTRIC PUMPS IN COMPLIANCE WITH EN 733 - DIN 24255 - FH
    Cast iron pump body and AISI 316L stainlesssteel, laser-technology welded impeller.Suitable for pumping hot and cold, moderatelyaggressive liquids.Available models:FHE Close-coupled with special motor shaft extension.FHS With stub shaft and standard motor.FHF With flexible coupling, adapter, base and standard motor in compliance with EN 733 - DIN 24255.Specifications * Delivery: up to 700,00 m/h * Head: up to 100,0 m * Power supply: both single and three-phase 50 and 60 Hz * Power: from 0,25 kW up to 132,00 kW * Maximum operating pressure: 16,0 bar * Temperature of pumped liquid: from -30,0 °C to 120,0 °C >>>
    View the product on lowara.co.uk Lowara UK Ltd
    PUMP - MDX SERIES

    PUMP - MDX SERIES
    First called a 4x35 and a 2x35, the MDX Series were the first centrifugal pumps manufactured by MARCH in the late 50's. Subsequently the nomenclature was changed to reflect the magnetic drive principal. The MDX Series pumps, since their inception, have undergone numerous improvements. The basic design, however, remains the same. As indicated in the options and specifications that follow, variations in the MDX Series include: numerous inlet and discharge ports, several motor options and wetted material combinations for total chemical comparability. The MDX Series can and should be classified as "the granddaddy of them all". Above models are not self priming pumps. FLOW AMD HEAD Flow rates range from 0 to 8.4 GPM maximum. Head of feet range from 0' to 19 maximum. INLETS AND OUTLETS Series MDX pumps are offered in many sizes as shown on page #9, F0960 catalog. Contact the factory for other sizes and types of inlets and outlets. Suffix ½ = suction and discharge sizes. Suffix 5/8 = suction and discharge sizes. MOTORS AC type motors in sizes 1/50 HP @ 1700 rpm; 1/25 HP @ 3400 rpm, 115 Volt, single phase or 230 volt single phase 50/60 HZ. TEFC type motor in 1/15 HP @ 3450 rpm, 115/230 Volt, single phase. Air motors are available for the MDX series. This can add to overall pump performance. Air motors indicated by suffix AM MATERIALS OF CONSTRUCTION Wetted parts - Glass filled polypropylene, Ryton®, Kynar®, 316 stainless steel, Buna N rubber, ceramic magnet, Viton® O'ring, ceramic shaft. APPLICATIONS Coffee dispensers, aquariums, bio-medical, dryers, ice makers, electrostatic painting, photographic processing, and vending equipment. MORE INFORMATION >>>
    View the product on marchpump.com March Manufacturing
    CAST IRON & BRONZE PUMPS 3642

    CAST IRON & BRONZE PUMPS 3642
    Features and Benefits Vertical or Horizontal mounting capabilities. Close-coupled, space saving design Standard carbon/ceramic faced mechanical seal with BUNA elastomers, 300 series stainless steel components. Optional seals available. Enclosed impeller design for high efficiencies. Motor is a close-coupled design.Ball bearings carry all radial/axial thrust loads. Designed for continuous operation. Applications Water circulation Liquid transfer General purpose pumping Spraying systems Booster service Jockey pump service >>>
    View the product on marlowpump.com MARLOW PUMPS Groupe - ITT Corporation
    CNV SERIES INLINE PROCESS PUMPS

    CNV SERIES INLINE PROCESS PUMPS
    Capacities to 700 GPM (160 m3/hr) Heads to 550 feet (167 m) Pumping Temperatures to 220° F (104° C) Working Pressures to 275 PSIG (1,896 kPa) The CNV Series Pumps are vertical inline, close-coupled, chemical process pumps. Standard features include an open drip-proof, JMV frame close-coupled motor (extended shaft) for fast availability, a space saving design, and a fully open impeller. Available in ductile iron and 316 SS construction >>>
    View the product on deanpump.com/ Met-Pro Dean Pump Division Groupe - Met-Pro
    DISPENSING PUMP - MCP STANDARD

    DISPENSING PUMP - MCP STANDARD
    Flow rates < 0.001 - 3700 ml/min (depending on mounted pump head) Channels 1 - 24 (depending on mounted pump head) Operating panel 7 button membrane key padLED display Memory 4 sets of operating parameters can be stored Operating modes pumping by drive speed (rpm) pumping by flow rate (ml/min) factory set flow rates for all available tube sizes dispensing by volume (ml) dispensing by time (0.1 s up to 999 hrs) dispensing by volume within a pre-set time >>>
    View the product on michael-smith-engineers.co.uk Michael Smith Engineers
    BOOSTER SETS BS

    BOOSTER SETS BS
    Technical data: CapacityUp to 12 l/s HeadUp to 80 m TemperatureUp to 90°C Design: Various pressure booster packages tailored to suit a wide range of requirements in the water supply. Each system is carefully designed to meet the applications individual needs and it selected on a basis of maximum reliability, durability, efficiency and economical operation. Pump model ranges are used to build standard and specialist packages of single or multistage pumps (type KCP or MS) to operate as worker/buster/stand by systems. Control equipment incorporating traditional Pressure/Flow/Level operation is available, together with the latest design in frequency control and inverter drive. All fabrication for skid mounted units is carried out in-house and full operation testing is carried out in MZT Pumpi 's own test facilities Application: Clean water Muddy water Water supply Oil industry Heating plants Mining, Civil Engineering The pumps can be ordered as individual pump or as complete pumping unit which consists of pump, driver, flexible coupling and mounted base frame. As standard the pump’s drivers are electric motors, but it could be any other device as: internal combustion engine, turbine, etc… >>>
    View the product on pumpi.com.mk MZT PUMPI AD
    3D-BGA INSPECTION SYSTEM

    3D-BGA INSPECTION SYSTEM
    3D-BGA Inspection System includes: ULTIMATE VIDEO MEASUREMENT SYSTEM... The 3D-BGA INSPECTION SYSTEM option includes the ultimate in Hi-Resolution video measurement systems and features: Linear, angle and circular measurement -one pixel at a time. Crossline 10 pre-set calculation capability -with password protections Data download capability for archiving -or transmitting data worldwide. Functions with monitor and computer -or with included monitor alone. The Result: ACCURATELY MEASURED AND SCALED 3D-BGA HI-RESOLUTION IMAGES, ALIVE AND IN LIVING COLOR!!!! HIGH-PERFORMANCE, HI-RESOLUTION VIDEO FRAME GRABBER... The 3D-BGA INSPECTION SYSTEM offers as an option a high speed PCI & Compact PCI video frame grabber that features: High Performance Super VGA Windows accelerator chip 4MB high-bandwidth MDRAM NTSC and PAL compatible High-quality video-in-a-window scaling DOS, Windows 95/98/NT & OS/2 drivers Microsoft Plug & Play compatibility Program hue, contrast, saturation, brightness, offset and gain The Result: ACCURATELY MEASURED AND SCALED 3D-BGA HI-RESOLUTION IMAGES TRANSMITTED OVER THE INTERNET, ALIVE AND IN LIVING COLOR!!!!! ERGONOMIC BENEFITS... The 3D-BGA INSPECTION SYSTEM offers true ergonomic benefits to the work place: No more stooping over the microscope. The inspector sits or stands at the workplace in an ergonomically correct posture performing inspection tasks. Eliminates eye fatigue associated with prolong Microscope use. Inspection is conducted using a Hi-Resolution Monitor depicting 3D color images. Ease of training is an added benefit. Now everyone sees the same 3D Hi-Resolution Color Images on the monitor versus the single person-single view process inherent with microscopes. The Result: ACCURATELY MEASURED AND SCALED 3D-BGA HI RESOLUTION COLOR IMAGES INSPECTED IN A COMFORTABLE AND PRODUCTIVE WORK ENVIRONMENT!!!!!! >>>
    View the product on ocwhite.com O.C. White Company
    HIGH HEAD PUMP - PP108C17

    HIGH HEAD PUMP - PP108C17
    Specification Pump Size: 200 Max Flow m3/hr: 1300 Max Head m: 130 Solids Size mm: 33 Maximum Speed rpm: 1800 Rated Power kw: 75-400 L x W x H: 1500x1500x1000 Dry Weight kg: 750 Features Features available for the PP108C17: 250mm x 200mm connections 50 cfm vacuum pump Excellent NPSHr Excellent suction lift Extreme pressure clear liquid pump Heavy duty high pressure pump High flowrate pump Options Options available for the PP108C17: Electric Fully enclosed Open set Skid >>>
    View the product on pioneerpump.co.uk Pioneer Pump Limited
    MAGNETIC DRIVE CHEMICAL PUMP - MDK#032

    MAGNETIC DRIVE CHEMICAL PUMP - MDK#032
    Cat.-No.: MDK#032 Design: Standard with catalogue-No. Series: MDK Product: Magnetic drive chemical pump, ISO Short description: MDK 50-32-125, housing without drain, magnetic drive size 8 Nm (2,5 kW/ 2900 min-1), PFA-lined, bearing pedestal long life grease lubrication Housing material: EN-JS 1049 (0.7043) Lining: PFA Size: 50-32-125 Nominal pressure: PN 16 Flange: ISO 7005-2, type B Delivery height: see overview performance curves Discharge flow: see overview performance curves Temperature range: -60°C bis +120°C (-75° bis +250°F) >>>
    View the product on richter-ct.com Richter Chemie Technik
    HELICAL GEAR PUMPS - 3800 SERIES

    HELICAL GEAR PUMPS - 3800 SERIES
    Sealed Bearing Pumps Applications Oil fiel applications including light and heavy crude oils Kerosene mixtures Condensated Condensates Hot Oil Features Differential pressures up to 125 psi EUp to 540 gpm (2 M3/min) Multi-lip grease purges seal assembly Maintenance indicator / Weep detection Triple shaft seals plus sealed ball bearings Over pressure relief type grease fittings Bi-directional rotation Options Available in 4 sizesr Wearplate available Relief valve optional on 3848 model only >>>
    View the product on roperpumps.com Roper Pump Groupe - Roper Industries
    FLOOR SCANNER - FLOORMAPVS2I

    FLOOR SCANNER - FLOORMAPVS2I
    The FloormapVS2i floor scanner is a NDT system designed to detect and size underfloor corrosion for above ground storage tanks. The FloormapVS2i is latest version of the best selling magnetic flux leakage (MFL) floor scanner and now comes with up-graded magnets to improve defect detectability and sizing on thicker materials, faster data capture with a custom designed micro controller and all new software. The VS2i contains significant improvements in terms of defect positioning, electronic data processing and software manipulation. Key Features Automatic CAD Drawing Patch Plate Design Feature Ruggedised Touch Screen Computer Real Time Data Acquisition and Analysis Hard Copy and Electronic Report Function Combined Defect Profiling and Amplitude Analysis Add Data from Visual, UT, Vac Box and MPI Inspection >>>
    View the product on silverwinguk.com Silverwing (UK) Ltd
    AQUASTREAM –MIXED FLOW PUMPS

    AQUASTREAM –MIXED FLOW PUMPS
    The success of the high efficiency mixed flow pump is based on its ability to produce large flow rates at low to medium heads. The specially developed hydraulic design produces efficiency up to 89% depending on the size. For outright performance and reduced running costs, the Aquastream is clearly in a class of its own. This range is used in a wide range of industrial and environmental applications and can be used on either clean or turbid water. The mixed flow impellers are cut to each duty point to minimise the motor power used. The flexibility does not stop there as these units can be supplied in horizontal, vertical open shaft or vertical direct mounted arrangement. Also, the Aquastream pump can be coupled to either an electric motor or diesel engine drives. Typical Applications: • Circulating duties • Water boosting • Irrigation • Fish farms • Many other general service applications for both clean and slightly contaminated non-corrosive liquids >>>
    View the product on spppumps.com SPP
    AT BOX COMPRESSION TESTER

    AT BOX COMPRESSION TESTER
    Title AT Box Compression Tester Ref No 25AT BOX-C Description Box compression tester with integral PC and software dedicated to testing corrugated board boxes and cartons. Construction Rigid Moving platen driven by 4 recirculating ballscrews Platen parallelism better than 1:4000. Load readings are taken from an average of 4 balanced load cells to compensate for the effect of any off centre loading. Max Load Capacity 25kN Accuracy BS EN ISO 7500:1 GRADE 1 Speed Range 0.1 to 500 mm/min Output RS232 Platen Size mm 1000 x 1000 Max Stroke mm 1000 Power Supply 110. 120, 220, 240v 1ph, 50 or 60Hz Overall Size mm (excluding console) 1420w x 1020d x 2000h Weight kg 820 >>>
    View the product on testometric.co.uk The Testometric Co Ltd
    CHEM-GARD® - THERMOPLASTIC PUMP

    CHEM-GARD® - THERMOPLASTIC PUMP
    Horizontal Centrifugal Pumps These heavy-duty and rugged horizontal centrifugal pumps are designed, engineered and constructed to handle corrosive, abrasive and other aggressive fluids, as well as those liquids which must remain free of metallic contamination. CHEM-GARD® pumps are available in a wide selection of thermoplastics and in ANSI/DIN, self-priming, close-coupled and integral pump/shaft motor designs. Their unique sliding front bearing design assures minimum shaft overhang, simplifies maintenance, and allows all types of mechanical seals to be utilized. Vanton's unique reverse-mounted seal arrangement avoids metal contact with fluid and eliminates need for exotic metal seals. Rated for flows to 1450 gpm (330 m3/hr), heads to 400 feet (122 meters), and for use at temperatures to 275°F (135°C). >>>
    View the product on vanton.com VANTON
    AH HEAVY DUTY SLURRY PUMPS

    AH HEAVY DUTY SLURRY PUMPS
    The Warman AH range is designed for continuous pumping of highly abrasive and/or corrosive slurries. The AHE, AHP,AHPP, AHESM and AHF ranges are extensions of the AH range. These have been developed to increase efficiencies, increase pressure ratings, handle scale or eliminate the problems of air locking encountered with conventional horizontal pumps when handling highly tenacious metallurgical froth. >>>
    View the product on weirminerals.com Weir Minerals Division Groupe - WEIR
    ADVANCED METAL PUMP P200 - 25 MM (1

    ADVANCED METAL PUMP P200 - 25 MM (1")
    FLOW RATE TO 212 LPM (56 GPM) MAX PRESSURE = 8.6 BAR (125 PSIG) WETTED HOUSINGS (Liquid Chambers and Manifolds) Material Ship Wt Aluminum 11 kg (24 lbs) Ductile Iron 21 kg (47 lbs) 316 S.S. 23 kg (51 lbs) NON-WETTED HOUSINGS Description Material Center Section: Acetal, Conductive Polypropylene, Polypropylene Air Valve: Acetal, Conductive Polypropylene, Polypropylene MAXIMUM SUCTION LIFT CAPABILITY 5.4 m (17.6') Dry MAXIMUM DIAMETER SOLIDS 6.4 mm (1/4") >>>
    View the product on wildenpump.com Wilden Pump
    AIR DRIVEN PUMPS - DA SERIES

    AIR DRIVEN PUMPS - DA SERIES
    AIR DRIVEN PUMPS DA SERIES Air operated, double acting hydraulic pumps for pressure testing, chemical injection and hydraulic power. Features • Infinitely variable output pressure and flow • Will hold static pressure without generating heat or consuming power. • Standard models are suitable for oil or water applications • Well proven and trouble free operation • Designed with the maintenance engineer in mind • Low cost servicing • Robust construction Air consumption: 120 scfm maximum (3400 N.Ltr/M) Weight: Approx. 88lb (40 Kg) Materials of construction: Air drive:- anodized aluminium/stainless steel with nitrile seals. Hydraulic section:- aluminium bronze/stainless steel with nitrile seals. >>>
    View the product on hydratron.co.uk Hydratron Ltd
    CENTRIFUGAL PUMPS MANUFACTURED IN AISI 316 STAINLESS STEEL I

    CENTRIFUGAL PUMPS MANUFACTURED IN AISI 316 STAINLESS STEEL I
    Laser-technology welded centrifugal pumps. Designed to handle hot, cold and moderately aggressive liquids.Specifications * Delivery: up to 240,00 m3/h * Head: up to 110,0 m * Power supply: three-phase 50 and 60 Hz * Power: from 0,25 kW up to 75,00 kW * Maximum operating pressure: 12,0 bar * Temperature of pumped liquid:from -10,0 °C to 110,0 °CApplications * Water distribution * Rain water collection * Industrial washing equipment * Heat recovery * Pressure boosting * Filtration equipment * General industry >>>
    View the product on londonpumps.co.uk London Pumps ltd
    ECONOMICAL SHOWER PUMP - 1SHOWERMATE 2.0

    ECONOMICAL SHOWER PUMP - 1SHOWERMATE 2.0
    Construction Pump Plastic Construction Rubber Feet Two Fitted - Reduces Transmitted Noise Colour White Pre-Wired Yes Power Supply 230/1/50 , Fuse 13 Amp Warranty 12 Months Dimensions L x W x H 313 x 132 x 188 (mm) This Pump Can Replace the Following Shower Pumps : Pearl 70 Installation Requirements (Call our Helpline 01793 820142 if you need help) Preferred Pump Location Airing Cupboard Max. Inlet Pressure 1.0 bar Max. Water Temperature 65'C Pipe Size 22mm Recommended Cold Tank Size 225 Litres Recommended Hot tank Size 136 Litres Accessories if Required 3/4" Temperature Regulator Controls Hot Water Temperature Below 65'C Float Switch For Low Water Protection in Cold Water Tank Leak Detector & Tray Stops Pump & Sounds Alarm C/W Protection Tray Extended Warranty Option Warranty Form Fill in Form and Email To Us Email us for more information, help or your nearest >>>
    View the product on pumpworld.co.uk Pump World Ltd




      Search    
     
     
     
    Search
    See all of the sector's products : Manufacturing and processes