Selection of 65 products among
187
FAN WITH DIRECT DRIVE
- 10000m³/h
- aluminium structure
- easily removable panels in galvanised steel
- with thermal & acoustic insulation
- centrifugal double suction fan
- dimensions in mm (W/D/H): 850X850X850
- max. Amperage: 8,5
- Volt: 400- KW: 2,2- HZ: 50
- Phases: 3
- Weight: 76kg
>>>
View the product on gastrodirect.fr
FAN WITH DIRECT DRIVE
- 4000m³/h
- aluminium structure
- easily removable panels in galvanised steel
- with thermal & acoustic insulation
- centrifugal double suction fan
- dimensions in mm (W/D/H): 600X600X600
- max. Amperage: 4,6
- Volt: 230- KW: 0,55- HZ: 50
- Phases: 1
- Weight: 37kg
>>>
View the product on gastrodirect.fr
FAN WITH DIRECT DRIVE
- 4400m³/h
- aluminium structure
- easily removable panels in galvanised steel
- with thermal & acoustic insulation
- centrifugal double suction fan
- dimensions in mm (W/D/H): 750X750X750
- max. Amperage: 5,0
- Volt: 230- KW: 0,51- HZ: 50
- Phases: 1
- Weight: 62kg
>>>
View the product on gastrodirect.fr
FAN WITH DIRECT DRIVE
- 2500m³/h
- aluminium structure
- easily removable panels in galvanised steel
- with thermal & acoustic insulation
- centrifugal double suction fan
- dimensions in mm (W/D/H): 600X600X600
- max. Amperage: 3,6
- Volt: 230- KW: 0,42- HZ: 50
- Phases: 1
- Weight: 35kg
>>>
View the product on gastrodirect.fr
FAN WITH DIRECT DRIVE
- 5500m³/h
- aluminium structure
- easily removable panels in galvanised steel
- with thermal & acoustic insulation
- centrifugal double suction fan
- dimensions in mm (W/D/H): 750X750X750
- max. Amperage: 3,4
- Volt: 400- KW: 1,3- HZ: 50
- Phases: 3
- Weight: 65kg
>>>
View the product on gastrodirect.fr
GLO-RAY MERCHANDISING DISPLAYWARMERS GRSDH-30
The perfect unit to merchandise hot fast foods is the Hatco Glo-Ray® Merchandising DisplayWarmer.
Designed specifically to hold hot wrapped or boxed product,
this unit holds hot food safely at proper serving temperatures.
Glo-Ray Merchandising Warmers have prefocused infrared top heat and a thermostatically-controlled hardcoated
heated base to extend the holding times of most food.
Hardcoated shelves, adjustable dividers, shatter-resistant incandescent display lights,
and 6' (1829 mm) cord with plug are standard.
FLEXIBILITY
This warmer offers the convenience of self serve and the efficiency of kitchen-to-serverholding.
Available with horizontal shelves, the Glo-Ray Merchandising Warmers
are offered in both single and dual shelf models.
Slant shelves are offered in single, dual and triple shelf models.
All models are made of extruded aluminum and sturdy stainless steel with tempered glass end panels.
Specially coated incandescent lights illuminate the food holding area.
Designed with a slanted base and horizontal shelf, the GRSDS/H series is ideal for holding
popcorn on the top shelf and nachos, boxedpizza, or wrapped sandwiches on thebottom shelf.
Alternative control locations make placement of merchandiser on front or back serving counters possible.
An optional high wattage top shelf is ideal for holding fried foods and an optional top
shelf clearance of 15" (381 mm) is also available.
Slant models 30" (762 mm) and wider will accommodate 18" x 26" (457 x 660 mm)sheet pans.
QUALITY
The following features assure the finest performance for years to come:
• All models have prefocused infrared topheat directing heat to
the outer edges of the holding surface where heat loss is the greatest.
• These warmers feature a thermostatically controlled, hardcoated heated base and a cord and plug set.
• Coated shatter-resistant incandescent lights enhance product display
while safeguarding food products from bulb breakage.
• An optional Indicating Temperature Control enhances accurate control
of temperature and provides digital readout of temperature.
VOLTAGE
GRSDH-24 to -52, GRSDS-24 to -60, GRSDH-24D, GRSDS-24D, GRSDS-30D, and GRSDS/H-30D: 120 volts,
single phase (use NEMA 5-15P; GRSDH-52,GRSDH-24D, GRSDS-60, GRSDS-30D, and GRSDS/H-30D
use NEMA 5-20P for Canada).
GRSDH-30D, GRSDS-36D, GRSDS-24T, and GRSDS/H-36D: 120 volts, singlephase (use NEMA 5-20P).
GRSDH-60, GRSDH-36D to -60D, GRSDS-41D to -60D, GRSDS-36T, andGRSDS/H-41D, -30DHW, -36DHW,
-41DHW: 120/208 or 120/240 volts, single phase, 4-wire (use NEMA L14-20P).
GRSDH-36D to -52D and GRSDS-41D to 52D: 120 volts, single phase (use twoNEMA 5-15P cords
- not available for Canada).
Export voltages available.
CORD LOCATION
GRSDH: Left rear corner toward server side.
GRSDS: Control side at right base corner.
GRSDS/H: Control side at right base corner.
OPTIONS (NOT FOR RETROFIT)
* Designer Colors:Warm Red, Black, Gray Granite,White Granite, Navy Blue, Hunter Green,Antique Copper
* Indicating Temperature Control (ITC)
* Stainless Steel End Panels (In lieu of Glass End Panels)
* Sneeze Guard (GRSDS models, one side) (GRSDH models, two sides)
* 15" (381 mm) Clearance Top Shelf (GRSDS/H models)
* Halogen Bulbs in lieu of Standard Display Lights
ACCESSORIES
* Flip-up Doors on One Side (24" thru 41"W (610-1041 mm) models)
(not available with sneeze guard option or display sign holder accessory on same opening)
* Split Flip-up Doors on One Side (52" and 60"W (1321-1524 mm) models)
* Backlit Sign Holder (Signs not included) – 120V 30"-52" (762-1321 mm) Slant Models,Top Shelf Only
* Display Sign Holder (Signs not included) – Top or Intermediate Shelf
* 4" (102 mm) Adjustable Legs (Standard on units over 36" (914 mm) in length or
weighing more than 80 lbs. (36 kg))
* Additional Stainless Steel Divider Rods
PRODUCT SPECS
Merchandising Warmer
The MerchandisingWarmer shall be a Glo-Ray® Model.
With 24/7 service (U.S. and Canada only), the warmer shall be rated at ... watts, ...volts, and be ... inches
(millimeters) in overall width.
It shall consist of athermostatically-controlled, hardcoated heated base, infrared heat from above, full
view tempered glass sides, adjustable divider rods, and incandescent display lights.
The infrared heating element shall be tubular metal sheathed
and the warmer shall have a cord with plug attached.
Accessories shall include backlit sign holder (slant models, top shelf only), displaysign holders,
and additional stainless steel dividers rods.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
VENTILATION
Ventilation
Construction caracteristics
A modern, linear design that reflects the simplicity and sturdiness of aspiration hoods.
Made in stainless steel, they are available in a wide range of sizes, the standard version or with motor assisted
extraction.
A great deal of importance has been given to the design and detailing which allows easy cleaning of the hoods.
They are also easy to install with brackets and wall plugs provided in a kit.
These standard hoods are supplied without a speed regulator adjuster, ceiling lamps or reduction.
The drain tray for fats and condensation is soldered and fitted with drain taps which allow the liquid-drain
after cleaning.
A wide access to the inside of the hood that allows a complete cleaning by removing the filters fitted on the one
guide that runs the whole length of the hood.
The precise finishing with folded and round borders aims to avoid any sharp edges and to facilitate cleaning.
Intermediate panels in different sizes can be inserted to get the best suction performance right where it is
most needed.
>>>
View the product on gastrodirect.fr
AXIAL FANS - ELECTRONIC COMPONENT COOLING
Small general purpose fans in industry standard frame housings. Available for standard ac supplies and special low 'safety' voltages; normally dual 50/60Hz frequencies. Equally available with
electronically commutated D.C. motors to suit standard power supply and battery voltages. Internationally recognised standards such as UL, CUL, VDE and TUV are generally obtained or applied for.
Application
Electronic cooling, lamp cooling, solarium equipment, small heat exchangers, refrigeration, de-odorising units, air ionisers, egg incubators, laboratory equipment, and for special effects.
>>>
View the product on axair-fans.co.uk
AXAIR FANS UK LIMITED
CLEARLITE 2000 VENTILATOR
This aesthetically designed window ventilator is suitable for use in utility buildings,
such as shopping centres, atria and public buildings. Thanks to its stylish framework,
minimal depth and
hidden controls, the Clearlite 2000 is ideal for use in aesthetically
designed glazed constructions.
In its closed position the unit’s operating system is totally concealed from view.
The Clearlite 2000 is suitable for both day to day ventilation and fire
ventilation applications.
The Clearlite 2000 is a hinged window ventilator that can be installed to any angle
from 10º to the vertical position. The opening angle of the window in relation to
its hinged base is variable to an angle of 90º.
Thanks to its flexible mounting positions and opening angle the Clearlite 2000 is
suited for day to day ventilation and smoke and heat ventilation. The Clearlite 2000
is constructed using thermally broken aluminium profiles to ensure reduced heat loss.
The Clearlite 2000 is usually supplied in a powder coated finish to any RAL colour
as standard.
The Clearlite 2000 can also be provided in non-coated versions or it can be
supplied with an anodised finish. The following frame options are available
within the Clearlite 2000 range: Single laminated glass, insulated glass, double
and triple walled polycarbonate; and single and double walled aluminium.
>>>
View the product on mckenziemartin.co.uk
McKenzie Martin Ltd
CUSTOM ENGINEERED CENTRIFUGAL FANS
Custom Engineered Centrifugal Fans
Howden custom engineered centrifugal fans are designed specifically for each contract which allows us to apply a combination of experience, advanced design
techniques and a knowledge of the operating conditions to select the optimum fan in terms of capital cost, running cost, maintainability and reliability.
A wide range of options are available in terms of drive arrangement, output control, layout and ancillary equipment, to give maximum flexibility to the plant designer. All major impeller configurations can be supplied including aerofoil, backward curved, backward inclined and radial tipped blade designs.
Large centrifugal fan rotors store significant amounts of energy when running. If the fan is not designed and manufactured correctly, and matched with the operating conditions, the consequences for the plant operator can include excessive power consumption, noise generation, vibration and mechanical failure, resulting in a significant loss of revenue.
Each of our designs has been exhaustively tested, aerodynamically and acoustically. Empirical design formulae that have been validated over many years are backed up with modern analysis techniques, including finite element analysis, dynamic response analysis and computational fluid dynamics.
It is this combination of knowledge and experience that has resulted in Howden becoming a global market leader in heavy-duty centrifugal fans.
>>>
View the product on howdenindustrial.com
Howden Industrial
