Environment equipments: suppliers, wholesalers and manufacturers on Hellopro
Search   

Environment equipments :

1784 products
Select the category
    Selection of 85 products among 1784
    HELISEM® MIXER - VT RANGE

    HELISEM® MIXER - VT RANGE
    VT Helisem agitator SABRE® propeller Impeller diameter 630 ? 500 mm Rated power from 0,55 to 7,5 kW Rotation speed from 29 to 140 rpm Operating capacity from 30 l to 170 m3 VT mixers are dedicated to operate on sealed tank, they are fitted with a mechanical seal. VT are equipped with a gear reducer oversized in order to run all day long. Seal device are : VTF : single dry mechanical seal for temperature up to 120 °C and pressure lower than 1.5 Bg. VTM : special single dry mechanical seal for temperature up to 120 °C and pressure lower than 3 Bg. VTG : double mechanical seal with a lubrication pot for temperature up to 150 °C and pressure lower than 7 Bg. VT shaft are tubular one for better resistance to mechanical efforts and lighter weight. Large Sabre® blades in 3 parts for an easy mounting allow adjustable positioning along the shaft. Part of offered options : -speed variation thank to a frequency inverter for a sharp optimization of the process. -heating protection of motor wiring, drip cover, heating resistance?. VT are available in several voltage and frequency All VT can be ATEX certified >>>
    View the product on miltonroymixing.com
    HELISEM® MIXER - VT1000 RANGE

    HELISEM® MIXER - VT1000 RANGE
    VT1000 Helisem agitator SABRE® propeller Impeller diameter 140 ? 400 mm Rotation speed from 165 to 1500 rpm Rated power from 0,37 to 1.5 kW Operating capacity from 50 l to 1.5 m3 VT1000 mixers are dedicated to operate on sealed tank, they are fitted with a mechanical seal. VT are equipped with a gear reducer oversized in order to run all day long or a direct drive. Seal device are : Single dry mechanical seal for temperature up to 100 °C and pressure lower than 2 Bg. Single mechanical seal with lubricating pot for temperature up to 80 °C and pressure lower than 1 Bg. The Sabre® blades in on piece allows adjustable positioning along the shaft. Part of offered options : -speed variation thank to a frequency inverter for a sharp optimization of the process only on gear drives. -heating protection of motor wiring, drip cover, heating resistance?. VT are available in several voltage and frequency All VT can be ATEX certified >>>
    View the product on miltonroymixing.com
    HELISEM® MIXER - VTG RANGE

    HELISEM® MIXER - VTG RANGE
    VT Helisem agitator SABRE® propeller Impeller diameter 630 ? 500 mm Rotation speed from 29 to 140 rpm Rated power from 0,55 to 7,5 kW Operating capacity from 30 l to 170 m3 VT mixers are dedicated to operate on sealed tank, they are fitted with a mechanical seal. VT are equipped with a gear reducer oversized in order to run all day long. Seal device are : VTF : single dry mechanical seal for temperature up to 120 °C and pressure lower than 1.5 Bg. VTM : special single dry mechanical seal for temperature up to 120 °C and pressure lower than 3 Bg. VTG : double mechanical seal with a lubrication pot for temperature up to 150 °C and pressure lower than 7 Bg. VT shaft are tubular one for better resistance to mechanical efforts and lighter weight. Large Sabre® blades in 3 parts for an easy mounting allow adjustable positioning along the shaft. Part of offered options : -speed variation thank to a frequency inverter for a sharp optimization of the process. -heating protection of motor wiring, drip cover, heating resistance?. VT are available in several voltage and frequency All VT can be ATEX certified >>>
    View the product on miltonroymixing.com
    HELISEM® MIXER - VTM RANGE

    HELISEM® MIXER - VTM RANGE
    VT Helisem agitator SABRE® propeller Impeller diameter 630 ? 500 mm Rotation speed from 29 to 140 rpm Rated power from 0,55 to 7,5 kW Operating capacity from 30 l to 170 m3 VT mixers are dedicated to operate on sealed tank, they are fitted with a mechanical seal. VT are equipped with a gear reducer oversized in order to run all day long. Seal device are : VTF : single dry mechanical seal for temperature up to 120 °C and pressure lower than 1.5 Bg. VTM : special single dry mechanical seal for temperature up to 120 °C and pressure lower than 3 Bg. VTG : double mechanical seal with a lubrication pot for temperature up to 150 °C and pressure lower than 7 Bg. VT shaft are tubular one for better resistance to mechanical efforts and lighter weight. Large Sabre® blades in 3 parts for an easy mounting allow adjustable positioning along the shaft. Part of offered options : -speed variation thank to a frequency inverter for a sharp optimization of the process. -heating protection of motor wiring, drip cover, heating resistance?. VT are available in several voltage and frequency All VT can be ATEX certified >>>
    View the product on miltonroymixing.com
    HELISEM® MIXER HIGH SPEED - VDA RANGE

    HELISEM® MIXER HIGH SPEED - VDA RANGE
    VDA mixers are fitted with a marine propeller with high efficiency. Impeller range is from 80 mm to 200 mm diameter. Direct power drive makes a very simple mixer Rated power starts from 0.25 kW up to 1.5 kW Rotation for little mixers starts from 750, 1000 & 1500 rpm Using capacity can be from 0.05 m3 to approx.1.5 m3 Pumping flow rate range is 35 m3/h to 200 m3/h VDA mixers are designed to work 24h/24h. Material of wetted parts is SS316L, or fluoro copolymer coating for corrosive bulk. VDA mixers can be equipped with standard option as lip seal, Atex compliance with, raincap, heating resistance, CPT sensors and adequate voltage or frequency. VDA are multipurpose mixers due to the simple but very efficient impeller and the high speed that allows a powerfull jet and can dissolve quickly powders. Impeller are in one part on solid shaft. VDA cannot run with a variable speed or during filling or discharging the vessel. >>>
    View the product on miltonroymixing.com
    AEROBIO200

    AEROBIO200
    Aerospray is a technique which creates a fine mist composed of billions of micro droplets.  These minute particles are diffused with the aid of an air canon across the entire surface  and area to be treated. The Aerospray treatment is indispensable for food processing industries, pharmaceutical  laboratories, cosmetic suppliers, medical practitioners and all public service areas  (including restaurants, bars and retail food outlets). This technique is used in all areas at risk from biological and micro-organisms  contamination where hygiene is critical and where the risk of contamination is high.  Examples include food processing and packaging areas, meat and fish preparation areas,  cold storage rooms and dry storage areas. Further examples where our product can be beneficial are in the medical profession,  operating theatres, intensive care units, hospitals, clinics and nurseries as well as in  the field of public service including exhibition centres, theatres and gymnasiums  as well as airport and transport locations. >>>
    View the product on gastrodirect.fr
    HELISEM® MIXER HIGH SPEED - VLA RANGE

    HELISEM® MIXER HIGH SPEED - VLA RANGE
    VLA mixers are fitted with a marine propeller with high efficiency. Impeller range is from 128 mm to 200 mm diameter. Direct power drive makes a very simple mixer, in addition , a lantern with a guiding bearing allows better life time, longer shaft and a flat flange on the product side. Rated power starts from 0.37 kW up to 1.5 kW Rotation for little mixers starts from 1000 & 1500 rpm Using capacity can be from 0.05 m3 to approx.1.5 m3 Pumping flow rate range is 70 m3/h to 400 m3/h VLA mixers are designed to work 24h/24h. Material of wetted parts is SS316L, or fluoro copolymer coating for corrosive bulk. VLA mixers can be equipped with standard option as lip seal, Atex compliance with, raincap, heating resistance, CPT sensors and adequate voltage or frequency. VLA are multipurpose mixers due to the simple but very efficient impeller and the high speed that allows a powerful jet and can dissolve quickly powders. Impellers are in one part on solid shaft. VLA cannot run with a variable speed or during filling or discharging the vessel. >>>
    View the product on miltonroymixing.com
    AEROBIO2008

    AEROBIO2008
    Aerospray is a technique which creates a fine mist composed of billions of micro droplets.  These minute particles are diffused with the aid of an air canon across the entire surface  and area to be treated. The Aerospray treatment is indispensable for food processing industries, pharmaceutical  laboratories, cosmetic suppliers, medical practitioners and all public service areas  (including restaurants, bars and retail food outlets). This technique is used in all areas at risk from biological and micro-organisms  contamination where hygiene is critical and where the risk of contamination is high.  Examples include food processing and packaging areas, meat and fish preparation areas,  cold storage rooms and dry storage areas. Further examples where our product can be beneficial are in the medical profession,  operating theatres, intensive care units, hospitals, clinics and nurseries as well as in  the field of public service including exhibition centres, theatres and gymnasiums  as well as airport and transport locations. >>>
    View the product on gastrodirect.fr
    HELISEM® MIXER LOW SPEED - FRF RANGE

    HELISEM® MIXER LOW SPEED - FRF RANGE
    FRF mixers are fitted with a large blade propeller with high efficiency. Impeller range is from 400 mm to 3600 mm diameter. Power drive is with a gear reducer for a low rotation speed that allows hard working conditions. Rated power starts from 0.37 kW up to 1.1 kW Rotation for little mixers starts from 8 tp 70 rpm Using capacity can be from 1 m3 to approx.300 m3 Pumping flow rate range is 150 m3/h to 13000 m3/h VRG mixers are designed to work 24h/24h. Material of wetted parts is SS316L, can be rubber lined or plastic coating for corrosive bulk. FRF mixers can be equipped with standard option as frequency inverter in cabinet or inclieded into the terminal box of the motor, with lip seal, raincap, heating resistance, CPT sensors and adequate voltage or frequency. FRF are dedicated only for flocculation process where low shear is required This is possible with a low rotation speed a two blade impeller and its specific shape that allow nice pumping flow at low rotation speed without shearing flocs. Impeller can be in one part for low diameter or 2 parts for bigger pieces for an easy mounting , fixed on solid shaft when length is lower than 2 m and tubular shaft for less weight over 2 m long. >>>
    View the product on miltonroymixing.com
    AEROBIOCHR

    AEROBIOCHR
    Aerospray is a technique which creates a fine mist composed of billions of micro droplets.  These minute particles are diffused with the aid of an air canon across the entire surface  and area to be treated. The Aerospray treatment is indispensable for food processing industries, pharmaceutical  laboratories, cosmetic suppliers, medical practitioners and all public service areas  (including restaurants, bars and retail food outlets). This technique is used in all areas at risk from biological and micro-organisms  contamination where hygiene is critical and where the risk of contamination is high.  Examples include food processing and packaging areas, meat and fish preparation areas,  cold storage rooms and dry storage areas. Further examples where our product can be beneficial are in the medical profession,  operating theatres, intensive care units, hospitals, clinics and nurseries as well as in  the field of public service including exhibition centres, theatres and gymnasiums  as well as airport and transport locations. >>>
    View the product on gastrodirect.fr
    HELISEM® MIXER LOW SPEED - VRG RANGE

    HELISEM® MIXER LOW SPEED - VRG RANGE
    VRG mixers are fitted with a large blade propeller of high efficiency. Impeller range is from 200 mm to 1800 mm diameter. Power drive is with a gear reducer for a low rotation speed that allows hard working conditions. Rated power starts from 0.37 kW up to 7.5 kW Rotation for little mixers starts from 40 tp 300 rpm Using capacity can be from 0.1 m3 to approx.100 m3 Pumping flow rate range is 100 m3/h to 15000 m3/h VRG mixers are designed to work 24h/24h. Material of wetted parts is SS316L, can be rubber lined or plastic coating for corrosive bulk. VRG mixers can be equipped with standard option as frequency inverter in cabinet or inclieded into the terminal box of the motor, with lip seal, Atex compliance with, raincap, heating resistance , CPT sensors and adequat voltage or frequency. VRG are particularly dedicated for mixing of shear sensitive liquids due to the high pumping flow at low rotation speed. Impeller can be in one part for low diameter or 3 parts for bigger pieces for an easy mounting , fixed on solid shaft when length is lower than 2 m and tubular shaft for less weight over 2 m long. >>>
    View the product on miltonroymixing.com
    AGR 30GI

    AGR 30GI
    WORKING PRINCIPLE :  The actinic light attracts all flying insects onto the special glue board inside the design uplighter,  silently and out of sight. ADVANTAGES : Efficient, insects caught silently and out of sight, odourless. Destroys even the smallest insects. Easy to remove, dispose of and replace  Does not affect humans or domestic animals in any way. INSTALLATION : The insect killers are suspended (or hooked) about 6.5 feet  above the floor, away from any sunlight.  Be sure that the apparatus is placed between the entrance point of the insects  and the space to be protected. INSECTES : Mosquitoes, flies, moths, wasps, horseflies… (non-exhaustive list). APPLICATIONS : Restaurants, cafes, hotels, kitchens, hospitals, food stores,  canteens, laboratories, warehouses, agricultural and food industries, pet shops,  offices, bedrooms >>>
    View the product on gastrodirect.fr
    HELISEM® MIXER LOW SPEED - VRP RANGE

    HELISEM® MIXER LOW SPEED - VRP RANGE
    VRP mixers are fitted with a turbine with 4 pitched blades Impeller range is from 200 mm to 800 mm diameter. Power drive is with a gear reducer for a low rotation speed that allows hard working conditions. Rated power starts from 0.25 kW up to 4 kW Rotation speed starts from 73 to 137 rpm Using capacity can be from 0.1 m3 to approx.10 m3 Pumping flow rate range is 50 m3/h to 2200 m3/h VRP mixers are designed to work 24h/24h. Material of wetted parts is SS316L, can be rubber lined or plastic coating for corrosive bulk. VRP mixers can be equipped with standard option as frequency inverter in cabinet or inclieded into the terminal box of the motor, with lip seal, Atex compliance with, raincap, heating resistance , CPT sensors and adequat voltage or frequency. VRP are multipurpose agitator, due to the turbine that provides a medium shear useful for powder dissolving for instance. Impeller can be in one part for low diameter or 4 parts for bigger pieces for an easy mounting , fixed on solid shaft when length is lower than 2 m and tubular shaft for less weight over 2 m long. >>>
    View the product on miltonroymixing.com
    AGR 40GI

    AGR 40GI
    WORKING PRINCIPLE :  The actinic light attracts all flying insects onto the special glue board inside the design uplighter,  silently and out of sight. ADVANTAGES : Efficient, insects caught silently and out of sight, odourless. Destroys even the smallest insects. Easy to remove, dispose of and replace  Does not affect humans or domestic animals in any way. INSTALLATION : The insect killers are suspended (or hooked) about 6.5 feet  above the floor, away from any sunlight.  Be sure that the apparatus is placed between the entrance point of the insects  and the space to be protected. INSECTES : Mosquitoes, flies, moths, wasps, horseflies… (non-exhaustive list). APPLICATIONS : Restaurants, cafes, hotels, kitchens, hospitals, food stores,  canteens, laboratories, warehouses, agricultural and food industries, pet shops,  offices, bedrooms >>>
    View the product on gastrodirect.fr
    MANUAL SOLIDS SEPARATION CHC-SH-L-O-BP

    MANUAL SOLIDS SEPARATION CHC-SH-L-O-BP
    Mineral oil grease and hydrocarbon separator from water by density difference and coalescence; it does not separate emulsified oils and hydrocarbon. Regulation and derivation system of the outflow (By-Pass system) settling tank and automatic obturator. Specially designed to be installed on large superficies. Overflowing water which gathers in the separator is separated and directly conducted outside, so that the separator only treats the flow for which the equipment was initially created for. >>>
    View the product on salher.com
    Salher   What does
    HELISEM® MIXER LOW SPEED - VRT RANGE

    HELISEM® MIXER LOW SPEED - VRT RANGE
    VRT mixers are fitted with a thin blade propeller of high efficiency (high pumping flow while power drawn is low). Impeller range is from 850 mm to 2000 mm diameter. Power drive is with a gear reducer for a low rotation speed that allows hard working conditions. Rated power starts from 0.55 kW up to 4 kW Rotation for little mixers starts from 172 tp 50 rpm Using capacity can be from 2m3 to approx.150 m3 Pumping flow rate range is 1400 m3/h to 9400 m3/h Then energy consumption can be 30 w/m3 only. VRT mixers are sized to work 24h/24h. Material of wetted parts is SS316L, can be rubber lined or plastic coating for corrosive bulk. VRT mixers can be equipped with standard option as frequency inverter in cabinet or inclieded into the terminal box of the motor, with lip seal, Atex compliance with, raincap, heating resistance , CPT sensors and adequat voltage or frequency. Impeller can be in one part for low diameter or 3 parts for bigger pieces for an easy mounting , fixed on solid shaft when length is lower than 2 m and tubular shaft for less wheight over 2 m long. >>>
    View the product on miltonroymixing.com


    123Suivant >>Fin >
    Go to page


      Search    
     
     
     
    Search
    See all of the sector's products : Environment equipments