Selection of 4 products among
4
INDUSTRIAL ATX MOTHER BOARD - NEX 716VL2G
Intel® Pentium® 4/4-M/Celeron® ATX Board with GbE LAN/4 x PCI Slots
Main Features
Supports Intel® Pentium® 4/4-M/Celeron® Processors with 400/533 MHz FSB
Supports 2 x 184-pin DIMM DDR
266/333 Memory up to 2 GB
Intel® 82845GV Chipset
Supports 1 x Intel® 82562EM 10/100 LAN and 1 x Intel® 82541 Gigabit LAN
Standard ATX Form Factor with 4 x PCI Slots, 3 x ISA Slots
6 x USB 2.0, 4 x COM Ports
Specifications
CPU Support Intel® Pentium® 4 processor up to 3.06 GHz with 512 KB L2 cache and 400/533 MHz FSB, Hyper-Threading technology and Intel® Net Burst Micro architecture support
Intel® Pentium® 4-M Processor up to 2.6 GHz with 512 KB L2 cache, 400 MHz FSB and Intel® Net Burst Micro architecture support
Intel® Celeron® processor up to 2.8 GHz with 128 KB L2 cache and 400 MHz FSB
Main Memory Two 184-pin DIMM sockets support up to 2 GB unbuffered non-ECC DDR 266/333 SDRAM
Does not support double-sided x 16 DDR Chip
Does not support stacking type memory
Chipset Intel® 82845GV chipset
Intel® 82801DB (ICH4)
BIOS Award system BIOS
Plug & Play support
4 Mbit flash ROM
APM (Advanced Power Management) support
ACPI (Advanced configuration & Power Interface) support
On-board LAN Intel® PRO/100 Network Connection (Intel LAN S82551 ER) x 2
Intel® 82562 EM 10/100 Fast Ethernet Controller x 1
Intel® 82541GI Gigabit Ethernet Controller x 1
Display Intel® 82845GV chipset with integrated graphics controller
64 MB VGA shared memory
15-pin CRT connector x 1
I/O Interface Serial port: SIO x 4 (COM2 with 422/485 optional), 9-pin header x 3, 9-pin D-Sub connector x 1
Parallel port: D-Sub 25-pin connector x 1, EPP/ECP support
LAN: 10/100 Fast Ethernet LAN x 1 and GbE LAN x 1
IDE HDD: Dual Ultra ATA 33/66/100 channels, 40-pin connector x 2, supports up to 4 HDDs (4 EIDE device support)
Floppy: 34-pin connector x 1
PS/2 Keyboard/Mouse: Mini-Din connector x 2
GPIO (4-in, 4-out)
Reset SW: on-board 2-pin header
SM bus: on-board 2-pin header
USB 2.0 x 6
5-pin IrDA pin header x 1
On-board RTC On-chip RTC with external Lithium battery back up
System MonitorDerived from ITE8712 super I/O
8 voltage (for +1.5 V, +3.3 V, +5 V, -5 V, +12 V, Vcore, +3.3 Vsb and +5 V stand-by)
3 fan speed (1 for CPU and 2 for system)
2 temperature (for CPU and external system)
Power Requirements Measure with Intel® Pentium® 4 2.66 GHz
+3.3 V: 0.6 A
+5 V: 1.5 A
+12 V: 5 A
+5 Vsb: 0.1 A
Measure with Intel® Pentium® 4-M 2.4 GHz
+3.3 V: 1 A
+5 V: 2 A
+12 V: 3.5 A
+5 Vsb: 0.05 A
Environment Operating temperature: 0°C to 60°C
Storage temperature: -20°C to 80°C
Relative humidity: 10% to 90% (Non-condensing)
Certifications CE approval
FCC Class A
>>>
View the product on nexcom.com
NEXCOM
INDUSTRIAL ATX MOTHER BOARD - NEX 732L2G
Intel® Pentium® 4 ATX Board with AGP/3 x PCI-X/3 x PCI Slots
Main Features
Intel® Pentium® 4 Processor with 400/533/800 MHz FSB, CPU Speed Up to 3.6 GHz
Supports 4 x DIMM Dual Channel DDR
266/333/400 SDRAM Memory up to 4GB
Intel® 875P/6300ESB Chipsets
1 x On-board AGP Slot, 3 x PCI-X Slots, 3 x PCI Slots
Standard ATX Form Factor
Specifications
CPU Support Single mPGA478 ZIF socket
Intel® Pentium® 4 Processor with HT Technology, with 1M L2 cache (Intel® Prescott (0.09µ process) / Intel® Pentium® 4 Processor with 256/512K L2 cache(Northwood) on die
Socket 478 processor supports 400/533/800 MHz FSB, CPU speeds up to 3.6 GHz
Supports Hyper-Threading technology (for all Prescott processors, or Northwood 3.06 GHz)
Main Memory Four 184-pin DDR DIMM sockets, supports up to 4 GB unbuffered ECC DDR 266/333/400 SDRAM
Available bandwidth up to 3.2 GB/s (DDR 400) for single-channel mode and 6.4 GB/s (DDR 400) in dual-channel mode
Chipset Intel® 875P/6300ESB Chipsets
Firmware Hub (FWH) 4 Mbit flash ROM x 1
BIOS Award System BIOS
Plug & Play support
Advanced Power Management support
Advanced Configuration & Power Interface support
Jumperless for CPU FSB
4 Mbit flash ROM
Supports Power On After Power Failure
On-board LAN Intel® 82551QM 10/100 Ethernet controller x 1
Optional Intel 82547GI Gigabit Ethernet controller x 1 (dedicated by CSA port directly from the Intel® 875P)
Compliant with PCI V2.1/2.2. IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab
RJ45 with LED connector x 2
Display One on-board AGP 8X slot
I/O Interface Winbond W83627HF Super I/O on board
SIO x 4, DB9 x 2, 10-pin header x 2,
PIO x 1, Bi-directional, EPP/ECP support, DB25 x 1
Floppy Disk controller: 3.5” 1.44 MB/2.88 MB support, 34-pin connector x 1
On-chip enhanced IDE x 2, PIO up to mode 4, Ultra ATA 33/66/100 support, total of 4 EIDE device support, 40-pin connector x 2
PS/2 Keyboard/Mouse Mini-Din connector x 2
GPIO (4 in, 4 out) pin header
On-board USB 2.0 ports x 4
On-board buzzer x 1
2-pin power on button switch
On-board 4-pin header for SM bus (I2C)
On-board 2-pin header for reset SW, 4-pin for speaker, 5-pin for keylock and 2-pin for power LED, 2-pin for IDE HDD Led
Serial ATA support, SATA connector x 2; data transfer bandwidth up to 150 MB/s, RAID 0, 1 supported (for two HDD)
On-board RTC On-chip real time clock with battery back up
Disk On Module On-board reserved power pin for DOM (Disk On Module)
ISA Support Through PCI to ISA interface
No ISA Master Device support
No ISA DMA support
Maximum of 3 ISA slots supported
System Monitor System monitor controller derived from Winbond W83627HF super I/O
7 voltage (For +3.3 V, +5 V, +12 V, Vcore, +2.5 V, +5 Vsb)
3 fan speed (For CPU x 1, system x 2)
3 temperature (For CPU x 1, system x 2)
Power Requirements +3.3 V: 11 A
+5 V: 17 A
+12 V: 14 A for Prescott P4 or 11 A for Northwood P4
5 Vsb: 2 A
Dimensions ATX form factor: 305 mm (L) x 244 mm (W)
Environment Operating temperature: 0°C to 60°C
Storage temperature: -20°C to 80°C
Relative humidity: 10% to 90% (Non-condensing)
Certifications CE approval
FCC Class A
>>>
View the product on nexcom.com
NEXCOM
