Element design :
4 products
CMOS VGA SENSOR MODULE - DCI0605C
Features
Compact size sensor module with integrated two-element lens system
640H x 480V (VGA) active pixels, 5.6 µmx 5.6 µm
Up to 30 fr/sec @ 12 MHz pixel frequency
4.48 mm (1/4") active image
diagonal
Highly sensitive, low noise
Bayer-RGB color filter array with micro lenses
Anti-blooming
Integrated on-chip timing
Progra mmable via I2C serial interface
Electronic shutter control
24 dB Progra mmable Gain Amplifier (255 steps of 0.094 dB/step)
9 bit digital output
User progra mmable window of interest
Single 2.6 - 3.6V supply voltage range, low power consumption
Real time white pixel correction
RoHS-compliant
Description
The DCI0605 is a fixed-focus, highly integrated 1/4" CMOS color imager module that supports up to VGA resolution formats in a small package including a focused optical system with high sensitivity and low noise. The sensor is digitally programmable via an I2C serial interface and is equipped with an integrated programmable Gain Amplifier and a 9 bit A-to-D Converter. The embedded flexible timing generator enables easy matching to various digital signal processing chips.
The module can operate as a master or as a slave. In the master mode, line and frame synchronization output signals are generated by the module. In the slave mode, the same pins are used as input for the horizontal and vertical synchronization signals.
DCI0605C Specifications
Specification Value
Resolution: 640(H) x 480(V), 307200 pixels
Pixel Size: 5.6 µm x 5.6 µm
Active Area: 3.6 mm x 2.7 mm
Dynamic Range: 54 dB
# Outputs: 1
Max. Frame Rate: 30 fps
Total Data Rate: 13 MHz
>>>
View the product on dalsa.com
Dalsa
POWDER & PARTICLE PROCESSING TECHNOLOGY
Hosokawa is the world's largest provider of processing systems for the field of powder and particle processing. Renowned names such as Alpine, Bepex, Stott, Vitalair, Rietz, Mikro, Micron, and
Vrieco-Nauta are all included in the Group's range. Regardless of the size, i.e. production-scale systems, pilot systems or laboratory equipment, Hosokawa's products and technologies are used in numerous process stages, for example during comminution, mixing, drying, agglomeration, classification, weighing and metering.
Grinding and Classifying
Agitated ball mills
Ball mills
Classifiers
Classifier mills
Crushers
Fluidised bed opposed jet mills
Granulators
Hammer mills
Impact mills
Pin mills
Jet mills
Spiral jet mills
Toner classifiers
Wet mills
>>>
View the product on hosokawa.com
Hosokawa Micron France
