Selection of 44 products among
231
TEST EQUIPMENT - AUDIO - ANALYSIS > DA795 DIGIPRO
Digital audio analyzer is a multi-function, dual-domain, precision digital audio test instrument which provides a powerful, complete set of test, troubleshooting and utility functions for digital
audio analysis, in a hand-held DSP-powered deviceAnalyze any stereo digital audio signal, and generate low-noise digital test signals, all at up to 24 bit/96k sample rate resolution. Digital audio analysis features and functionality normally found only on expensive bench test equipment, now available in a portable, easy-to-use and cost-effective package.All the connections you'll need - Two sets of AES/EBU and SP/DIF inputs, including Toslink and ADAT, plus Word Clock in. Digital outputs, including AES/EBU, SP/DIF, and Toslink/ADAT, and Word Clock out. Analog stereo headphone and unbalanced mono analog outputs. ADAT sync and RS-232 serial for computer interfacing.
>>>
View the product on sequoia.co.uk
Sequoia Technology Ltd
COMPACTPCI PASSIVE PC•MIP MODULE CARRIER CM5-TRIO
CompactPCI Passive PC•MIP Module Carrier
Three Mezzanine Modules Fitting on a 3U Eurocard
Because the customer can profit from both individual configuration of the system and moderate cost,
mezzanine concepts are very popular for industrial grade computers. Based on the PC•MIP module standard, EKF presents the CM5-TRIO, a 3U CompactPCI ® passive carrier board for PC•MIP modules.
The PC•MIP electrical characteristics are derived from the PCI specification. Compared to PMC modules, PC•MIP allows for higher system integration due to its considerable smaller dimensions. A 3U form factor Eurocard carrier board can hold up to three PC•MIP modules.
The CM5-TRIO is provided with the popular PCI bridge chip Intel/DEC 21150. All 3 PC•MIP slots are connected to the local PCI bus. Access to any individual PC•MIP module by the host CPU takes place transparently across the PCI bridge.
2 of the PC•MIP slots are suitable for Type-II modules with front panel orientated I/O. The remaining slot can be used with a Type-I module only.
EKF already offers a variety of I/O functions as PC•MIP Type-II module, e.g. Ethernet, USB, ISDN and IEEE-1394 (FireWire).
Please note that the CM5-TRIO does not provide rear I/O across the PC•MIP modules J3 on any of the three PC•MIP slots. This is in order to avoid potential conflicts with a 64-bit CompactPCI backplane.
For volume quantities however, EKF would like to offer a customer specific version of the CM5-TRIO using the J2/P2 CPCI connector as rear I/O path to a transition module.
Ordering Information
Alias Ordering No. Short Description
TRIO CM5-1-TRIO PC•MIP Carrier Board, 3U, 3-slots, passive
>>>
View the product on ekf.de
EKF Elektronik
DIELECTRIC STRENGTH - EDO4
MULTIFUNCTION APPLIANCE FOR ELECTRIC SAFETY TESTS
EDO 4 ENABLES TO CARRY OUT TESTS FOR:
-Dielectric strength;
-Continuity of the equipotential circuit;
-Insulation resistance;
-Residual
voltage in accordance with the directions of the IEC
roduct rules and with the EC directives.
EN 1180-1/2, EN 61180-1/2 (CEI 42-9/10)
Concerning high voltage testing techniques for low voltage appliances.
EN 60439-1 (CEI 17-13/1)
Concerning electric boards, type AS and ANS.
CEI 23-51
Concerning electric boards for domestic use and similar.
EN 60204-1 (CEI 44-5)
Concerning appliances electric equipment
EDO 4 is totally microprocessor run, thus enabling to get all the measures in true effective value (TRUE RMS). Every command to be given to EDO4, except for high voltage regulation during the dielectric strength test, goes through the 8 buttons of the front switchboard only.
With EDO4 microprocessor it is possible to switch scale automatically (if provided for), to support the precision of measurements with a software and to set measurements either with a software or with a hardware.
EDO4 can also store 2000 tests already done. It is possible to print stored results by linking a parallel printer to the connector already present on the appliance, even after it has been switched off. Remote control allows EDO4 programming through PLC or by any external keyboard. EDO4 allows a PC to be linked through a serial gate
RS232. The employed display is of an alphanumeric kind, backlighted with 4 lines and 40 columns. The following table shows all the feasible parameters to input and the precision of measurements.
>>>
View the product on pesatori.com
Enrico Pesatori
ADVANCED WINDING ANALYZER AWA IV
A Revolutionary Advance in
Insulation Test Technology
Tests:
l Surge/Impulse voltage
l DC high potential/PI
l Resistance
l
Insulation Resistance
Integrated Testing Capabilities
The AWA IV integrates a wide range of electrical tests with the hallmark quality of a Baker. This instrument supports all major electric tests in a single field portable unit including surge, polarization index, DC HiPot, megohm and winding resistance. This instrument complies to IEEE recommentations.
Continuous Innovation
With the AWA IV, Baker Instrument Company continues to pioneer new breakthroughs that demonstrate our ongoing commitment to quality, reliability, and competitive advantage. The AWA IV is the result over 40 years of designing and building winding test instruments. It´s the only tester available today that provides automatic pre-programmed tests and manual control tests in the same instrument.
The Power of Automation
The AWA IV has been designed around PC104 technology that allows the instrument to work efficiently without fans to cool the processor. This computer performs all requested tests, stores and results, and continuously monitors voltage levels while testing. if the computer detect a weakness in the insulation, the test is interrupted, the operator is alerted, and all test parameters at the time of the interruption are reported. The AWA IV performs this operation in microseconds with a higher degree of percision and safety than can be achieved through manual testing.
Automatic or Manual Control
The AWA IV gives you the option of automatic or manual test. In manual mode, the system allows operator control over tests, voltage levels, data collection.
>>>
View the product on bakerinst.de
Baker
RIGEL 266 PLUS ELECTRICALL SAFETY ANALYSER
The Rigel 266 Plus is a highly compact, easy-to-use medical electrical safety analyser, designed to test in accordance with IEC/EN 60601-1, MDA DB9801, and AS/NZ 3200.
In addition to the Semi
Automatic test, the Rigel 266 Plus safety analyzer provides fully manual test routines, easily selectable via the rotary selector switch and dedicated push buttons for individual Single Fault Conditions. A sequence of leakage measurements can be selected without requiring a power break, providing a quick test solution for medical equipment requiring a power-up / down delay time.
A large LCD display provides clear indication of test results, Single Fault Condition, AC or DC measurements and pass/fail limits.
With its compact design and full IEC 60601-1 features, the Rigel 266 Plus safety analyser provides the user with a highly effective and portable test solution.
>>>
View the product on clareinstruments.com
Clare Instruments Groupe - Seaward Electronics
FALCON LEAK TEST SYSTEMS®
The new Falcon Leak Test System® offers breakthrough leak testing capabilities that deliver unmatched performance.
* Simultaneously determines leak location
* Calculates total leak rate
* Provides real-time process control
The Falcon Leak Test System interfaces with a matrix of strategically integrated In-telense sensors (patent pending) to identify the leak location and measure the accumulative leak rate for the part. The System is a cost-effective solution that bridges the gap between traditional pressure decay technology and helium vacuum mass spectrometry, providing detection sensitivity to 10-6 sccs. The Falcon Leak Test System delivers performance, efficiency, communication and control benefits that significantly enhance leak detection effectiveness.
* Identifies leak location and displays on-screen graphic for visual recognition
* Simultaneously locates leaks and calculates leak rate
* Stores data for leak trend tracking
* Easily interfaces with factory communication systems in real-time
* In-telense probes immediately sense presence and magnitude of leak
* In-probe microprocessors initiate data processing
* On-board diagnostics maintain system vitals
* Advanced software coordinates the signals from multiple sensors
* Eliminates the need for additional leak tests
* Allows quick resolution of manufacturing deficiencies
* Helps to avoid downtime and production line back-up
>>>
View the product on cincinnati-test.com
Cincinnati Test Systems
SOFTWARE - PLANTSTATS
Get To Grips With:
machine availability, down time,
utilisation, bottleneck identification,
maintenance performance,
production and shift performance,
wastage and much more...
Enables plants to
maximise equipment utilisation by
capturing down time events and reasons.
Provides a simple touch-screen operator interface
minimising the time taken to record production
faults.
Gives a clear visualisation of plant performance by
shift, line, machine, reason and date range.
Includes the analysis tools to rapidly identify
opportunities for improvement.
Reports include Overall Equipment Effectiveness
(OEE) based on Availability, Performance and
Quality.
Performance information is available immediately
permitting timely and cost saving intervention.
The screens are designed for ease of use, and are
operated using a touchscreen, mouse or keyboard.
>>>
View the product on iccs-ltd.co.uk
ICCS Ltd
FOTOBOARD 2
FOTOBOARD2 is a high quality pre-sensitised laminate, ideal for producing small numbers of printed circuit boards (PCBs) for use by design engineers or for work in the classroom or laboratory. Its
key benefits are that it enables the manufacturing process to be fast and consistent - for both single and double sided boards.
All materials used in the manufacture of FOTOBOARD2 are high quality. This, together with our technical expertise and stringent manufacturing controls, ensures the high standard of every product which is delivered to our customer.
FOTOBOARD2 is coated with a positive working photo resist which is inherently capable of reducing defects caused by dust and dirt on the photowork and printing frame. The unexposed photo resist remains hard after exposure to form the image or circuit pattern and remains unaffected by the developing process.
The unexposed resist is a blue/green In colour and when exposed, tends to go a shade lighter - the change can be seen in daylight.
To ensure a uniform coating thickness, we have incorporated a roller coating system in our production line. This gives more stability, particularly in the final processes, and consistency from batch to batch.
The board's final coat is a low tack black film which affords mechanical and light protection.
FOTOBOARD2 Specification
Two basic substrates are used in the manufacture of FOTOBOARD2. FR4 and CEM/1 are both rigid composite laminates - standard thickness 1/16" (1.6mm) n/n, 1/0, 1/1, copper. Others available at request.
FR 4 is a material composed of class woven glass cloth and copper foil. It is flame retardant according to UL-94 grade V-O
The laminate meets most commonly used specifications and is tested according to NEMA, LI-1 : MIL-P-13949 and IEC249-2-5.
Thickness tolerances to MIL-P-13949H Glass II and IEC 249-2-5 (TAB II)
Copper surface aspect to MIL-P-13949H
Copper foil to IEC 249-3 Type A electrodeposited copper foils
Copper thickness to IEC 249-3A class I (TABIII) Up to a maximum thickness of 3.2mm can be supplied on request.
CEM/1 is a material composed of a paper--based core impregnated with epoxy resin, glass woven face sheets impregnated with epoxy resin and copper foil. Like FR 4, it is flame retardant according to UL-94 grade V-O and meets most commonly used specifications. It is tested according to NEMA, LI-1: IEC249-2-9.
Thickness tolerances to IEC 249-2-9 (TAB I). Copper surface aspect to MIL-P-13949G.
Copper foil to IEC 249-3.
Copper thickness to IEC 249-3A class I (TABII) Up to a maximum thickness of 3.2mm can be supplied on request
>>>
View the product on WWW.PRECISIONMICRO.COM
PRECISION MICRO LTD
CLIP TESTER UCT 21
The UCT 21 is very easy to operate. The user picks a test signal from the accompanying track list, plays the signal on an audio CD player or CD ROM player and checks the response of the equipment
under test.
The left channel of the audio CD player/CDROM player serves as signaling and ringing channel, the right channel as data channel for FSK data. Before initial operation both channels have to be equalized manually by adjusting the calibration tuner. This is carried out with the help of a calibration track on the CD. With the built-in VU meter of the CLT 1000, the customer can verify the calibration of the instrument..
Technical Specifications
* Testing of CLIP function on NTE
* Includes ETS 300 778-1 for Off-Line-Operation
* Other Standards and test signals available
* CDs with customersÂ’ specific test packages can be provided
* For Use in Development, Production and Service environments
* Multi Standard CLIP Signals delivered on CD
Key Features
Ringing Voltage
Range 0 to 75 Veff
Accuracy at calibration with built-in VU-Meter ± 5 V
Ringing Frequency
Value 20 to 60Hz (CD track)
Accuracy ± 0.1 Hz
Calling sequence Any sequence
Overloading Current-powered overloading control with built-in, short-circuit resistant
DC-Feeding
Value 24V or 48V, manual switch
Accuracy 1,5 %
Feeding resistor
Feeding resistor
Value 1 kOhm
Accuracy 1,5 %
Polarity of Feeding Manually or CD-controlled
Loop current Identification circuit reacts at 13 mA ± 15 %
Loudspeaker Internal
Calibration Via built-in VU-Meter or external measurement instrument
Option: Artificial Line 1 to 10 km in steps of 1 km, Ø 0.6 mm
Delivery format UCT 21 + power cable
Audio connection cable Cinch-Cinch + adapter Cinch-Jack 3.5 mm
Operation manual
CLIP CD1 and CD2
Dimensions 450mm x 90mm x 320mm (wxhxd)
Main power supply 115/230 V AC (60/50 Hz), Protection Class 1
Service and warranty One-year warranty
Extended product service and support agreements can be provided on request
>>>
View the product on sparnex.com
Sparnex
ANALOG ARRAYS - FEATURE SHEET
Optimal Cost and Performance
The drive for smaller, faster and less expensive electronics in today's competitive marketplace is forcing system hardware designers to merge analog and digital
circuits. Remaining profitable in this environment means that system hardware designers must provide high-level integration and cost-effective ASIC solutions. AMI SemiconductorÂ’s innovative analog arrays are optimized for integrating analog and digital functionality, and
provide flexible and fast time-to-market solutions for a broad range of markets and applications.
For over 40 years, AMIS has supplied mixed-signal ICs to meet the industryÂ’s growing demand for small, fast and cost-effective advanced electronics.
Analog Array Advantages
Economical solution through array approach
Reduced design times
Optimized performance by custom circuit design
Proven technology
Chip emulation through breadboarding
Significantly reduced cost by using existing arrays
Enhanced system performance
In-house customized test program
Features
System architect partnership to find the customized solution
AD DA converter (Sigma Delta, dual slope, flash, successive approximation)
Voltage reference (absolute voltage error < 1%, output voltage drift < 50ppm/°C)
Breadboard
Switch cap filters
Up to 100V process
EEPROM (up to 32kbit, dta retention > 10 years)
Low power capabilities
Temperature sensing
Pressure sensing
Sample Applications
Medical - glucose meters, heart rate monitors, pulse oxymetry, automated drug dispensing
Industrial - security sensing (glass break detector, PIR, motion detectors), battery management, RFID tags, automatic meter reading, ground fault detectors, flow sensors
Consumer - digital pens, DC-DC current regulation, touchscreens, consumer protection and encryption, printer ink management
>>>
View the product on amis.com
Amis
