Electrical isolation stations :
3 products
STOP SWITCH, DC & AC ISOLATORS
Stop Switch, DC & AC Isolators
For use with all turbine models, these switches allow the user to isolate the DC supply to a load, to apply an electrical brake to the turbine and to isolate the AC
side of an inverter (if connected). The AC isolator is a 4-pole 20A lockable switch, which should be used when connecting Grid-Tied Inverters to a mains supply. The switch should be mounted close to the main consumer unit, between a spare 16A breaker and the inverters.
The DC Isolator and Brake should be connected to the output of the wind turbine, between it and the load (inverter, batteries etc). The main rotary switch is rated at 63A and is 4-pole. In this mode, the internal connections have been pre-wired in pairs of 2 poles, giving a massive switching capacity of 120A. Also mounted inside these switches are a low resistance dump load, allowing the turbine to slowed to a safe level before applying a direct short circuit to the turbine output wires.
>>>
View the product on futurenergy.co.uk
Futurenergy Ltd
212V2 - BENCHTOP IONISER
The Model 212v2 Benchtop Ioniser is a compact unit which complements the Meech Series 200 product range. The Model 212v2 provides excellent work station coverage and a high level of ESD protection.
It has been specifically designed to meet the demanding performance requirements in applications such as: ·Semiconductor manufacture · Electronics assembly & testing · Test and re-work · Optics, contact lenses & fibre optics · Medical device manufacture & packaging · Wave soldering
Features Benefits
Balance ionisation (typical) +/- 10V Prevents possible ESD damage in sensitive electronic applications, reduces scrap and saves on replacement costs.
Dirty pin indicator and audible alarm Particularly important in applications where balanced ionisation is key to prevention of ESD damage to components. Also, informs the operator when maintenance is required (emitter pin cleaning).
Removable pins Easy to clean and replace. Minimum maintenance downtime.
Two fan speed settings Can be set for optimum operator comfort and ionisation range.
Small footprint Takes up little room, allowing more space for operators’ work activity.
Technical Characteristics
Dimensions 160mm x 160mm x 95mm (H x W x D)
Weight 0.65 Kg
Air Volume Output 15 – 20 lts/sec (33 - 43 cfm)
Noise Level 46 dBA at 1 metre distance
Decay Time (typical) < 4 secs @ 305mm distance and max fan speed. (1000 to 100v)
Input Voltage 24V DC (switchmode PSU)
Power consumption 12W
Ozone < 0.01 ppm
Calibration Factory calibrated at 305 mm
>>>
View the product on meech.com
Meech International
