Electric control switches - All suppliers - Commutators - grill commutation - matrix commutation - commutation - commutator - peritel - peritel commutator - linear commutator - commutation perit
Search   




Electric control switches :

55 products Flux RSS
CEDR 6P PIR OCCUPANCY SWITCHES

CEDR 6P PIR OCCUPANCY SWITCHES

Ceiling directional PIR switch. Designed to give a directional view of the activity to be monitored. Detection angle 120°. Can be rotated and lowered to a 45º angle. The socket can be mounted on a BESA box Specification Time lag range: 10 seconds to 40 minutes in 9 steps Photocell range: 100 to 1000 lux, and inactive Loading: up to 6 amps (1500W) of any type of load (including fluorescent lights and fans) Dimensions (mm): see below >>>
View the product on danlers.co.uk Danlers Ltd
ALTERNATOR CHARGE DIVIDERS - AUTO ISOLATOR

ALTERNATOR CHARGE DIVIDERS - AUTO ISOLATOR

The Auto Isolator I detects when a vehicles alternator is charging the battery and then closes a solenoid operated switch to additionally charge an auxiliary battery. When the engine is stopped, the solenoid opens to isolate the batteries. Upon starting the engine with a charged auxiliary battery, the solenoid is energized to parallel the batteries and provide a starting boost. If the auxiliary battery is low, the batteries are not paralleled.Since the auxiliary battery is charged through a solenoid-operated switch rather than an isolation diode, the auxiliary battery is fully charged. The .7 volt diode drop is eliminated, as is the power dissipation in the diode. The system therefore is more efficient. The starting boost provided by the parallel batteries is especially useful in cold weather or when the main battery is low. >>>
View the product on ludomcgurk.co.uk Ludo McGurk Transport Equipment Ltd.
ENABLING SWITCH

ENABLING SWITCH

EBE enabling Switches are manually operated control devices which are intended for use by persons working in danger areas of machines and installations. In “manual mode”, the protective effect of movable safety guards may be disabled under certain conditions. Authorized personnel can then enter dangerous areas with the enabling switch. Enabling switches are available in different hand versions and different builtin versions. A special evaluating unit is not required for EBE enabling switches due to a special switch mechanism. Standards: IEC60947-5-1, EN60947-5-1, JIS C8201-5-1, UL508, CSA C22.2 No. 14 Approvals:ISO12100/EN292, IEC60204- 1/EN60204-1, ISO11161/prEN11161,ISO10218/EN775, ANSI/RIA R15.06 Features • Light and stable action point • Reliable line monitoring for cross shorts • Tamper resistant • Light weight • Three-stage design • easy to attach by magnetic clamp >>>
View the product on ebe-gmbh.de EBE Groupe - EBE Group
ASO-FOOT SWITCH

ASO-FOOT SWITCH

AFS foot switches are universally applicable at the most different machines and facilities. The one-piece PU capping ensures a high robustness and avoids wear out by abrasion. The foot switch can easily be installed by the three prepared fastening spots. Due to the small actuating force with short operating path the mechanical load of the switching element is limited to a minimum. This secures a high lifetime and guarantees a comfortable and sensitive switching in most ranges of application >>>
View the product on asogmbh.de ASO
CPC7220/CPC7221 LOW CHARGE INJECTION 8-CHANNEL HIGH VOLTAGE ANALOG SWITCH

CPC7220/CPC7221 LOW CHARGE INJECTION 8-CHANNEL HIGH VOLTAGE ANALOG SWITCH

The CPC7220 and CPC7221 are low charge injection 8-Channel high-voltage analog switch integrated circuits (IC). These devices are capable of switching large load voltages and have a flexible load voltage range, e.g. +40V/-160V or +100V/-100V. Switch manipulation is managed by an 8-bit serial-to-parallel shift register whose outputs are buffered and stored by an 8-bit transparent latch. Level shifters buffer the latch outputs and operate the high-voltage switches. Devices are packaged in 44-pin J-leaded Plastic Chip Carriers, 28-pin PLCCs (Plastic Leadless Chip Carriers. >>>
View the product on clare.com Clare Groupe - IXYS
AUTOMATIC TRANSFER SWITCHES ZBTS - STANDARD (OPEN) TRANSIT

AUTOMATIC TRANSFER SWITCHES ZBTS - STANDARD (OPEN) TRANSIT

In critical applications such as hospitals, data centers and airports, power cannot be interrupted for maintenance of automatic transfer switches. In such circumstances, a bypass-isolation switch is essential and is often required by code. GE Zenith Controls ZBTS Series Bypass-Isolation Transfer Switches are the solution when interruption of power during service or testing is not acceptable. Consisting of two major modules-the Automatic Transfer (ATS) and the Bypass-Isolation Switch-the ZBTS Series incorporates the rugged construction of all our ZTS Series automatic switches with a quick make/quick break bypass switch manual load transfer handle and our control/interlock system, which consists of both mechanical and electrical interlocks. The bypass uses normal failure sensing and a time delay to start the engine automatically if a failure occurs when the ATS has been removed for service-which can be done without disturbing the load. >>>
View the product on geindustrial.com/cwc/products?famid=2&lang=en_US GE Arresters Groupe - GE+Electrical Distribution
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Electricity/Electronics