Distributors and solenoid valves: suppliers, wholesalers and manufacturers on Hellopro
Search   


Distributors and solenoid valves :

54 products
Select the category
    Selection of 50 products among 54
    LEE HIBAR MINIATURE PILOTING SOLENOID VALVES

    LEE HIBAR MINIATURE PILOTING SOLENOID VALVES
    Ultra-Compact Design Saves Space and Weight High Performance-Efficient Force/Stroke Relationship Low Power Consumption Positive Pull-In At High Temperatures and Low Pressures Lee MultiSeal Saves Space, Weight and Machining Costs O-Rings and Back-Up Rings are Eliminated with Lee MultiSeal Reliable, Low Leakage, Miniature Valve Element Single Coil - Normally Closed and Normally Open Solenoid Valves for 3000, 4000 & 5000 psi Dual Coil Normally Closed and Normally Open Solenoid Valves for 3000, 4000 & 5000 psi Multiple Lead Wire Egress Options Integral Connectors >>>
    View the product on microhydraulics.com LEE COMPANY
    MECHANICAL AND SOLENOID VALVES, CYLINDERS

    MECHANICAL AND SOLENOID VALVES, CYLINDERS
    Camozzi manufacture quality Italian pneumatic systems and export the systems to countries all around the world. PROair Solutions roots began 25 years ago as co-founders of Camozzi South Africa where the high quality and good service made Camozzi a leading system throughout the country. Camozzi produce mechanical and solenoid valves, cylinders, rotary actuators, hydo-check units grippers, push-fit fittings, push-on and a wide selection of vacuum systems that include ejectors, suction pads, spring plungers and check valves. The general program also offers off the shelf and 24 hour custom made cylinders from mini 8mm to 320mm bore. >>>
    View the product on proairsolutions.co.uk PROair Solutions Ltd
    DIRECT ACTING SOLENOID VALVE - C03.D/AP

    DIRECT ACTING SOLENOID VALVE - C03.D/AP
    THREE WAY NORMALLY CLOSED - DIRECT ACTING SOLENOID VALVE DESCRIPTION Mechanical Characteristics: Three Way Normally Closed Direct Acting Solenoid Valve with spring return. Suitable for gaseous and liquid media compatible with the body and seal materials specified. Special High Pressure Model. Forged Brass or 316 Stainless Steel body. Stainless steel internal moving parts. Solenoid can be rotated 360°. Valve will operate in any position. ELECTRICAL CHARACTERISTICS Light alloy epoxy painted explosion proof solenoid housing. Electrical and mechanical parts certified to ATEX 94/9/CE directive. Suitable to control the flow of flammable and/or inert gases or liquids. Internal and external anti-twist ground connecting screws. Inside terminal board suitable for cable up to 2.5mm. COIL SPECIFICATION: COIL SERIES: B6E Cable Gland Entry**: 1/2” BSP, or 1/2” NPT or M20*1.5mm Coil Housing Protection Class: IP67 Ex Protection Class: II 2 GD (EEx-d IIB, IIC), 11 1/2 GD (EEx-d IIB, IIC) Temperature Class: T6 (t.amb -20 to +40ºC). T5 (t.amb -20 to +55ºC) upon request Coil Insulation Class: F (155ºC) - H (180ºC) upon request Winding Wire Class: H (180ºC) Duty: Continuous (S.I.) 100% ED Power Consumption: AC: 11VA (28VA Inrush). DC 11W Voltage Tolerance: ± 10% (standard). Other voltage tolerances upon request. Insulation: > 1000 Mohm Dielectric Strength: > 2000 V/1' Standard Voltages: 12, 24, 48, 110, 115, 125, 220, 240 VAC DC or AC (50/60 Hz) Other voltages available upon request >>>
    View the product on watervalve.co.uk Red Dragon Ltd
    TOTAL ISOLATION MICRO SOLENOID VALVE - D351

    TOTAL ISOLATION MICRO SOLENOID VALVE - D351
    3/2 universal function Total separation (DRY) D351..01G - ZE30A manifold mounting GENERAL FEATURES - Total isolation micro solenoid valve: the actuator is totally isolated from the fluid so that the wetted parts are just the body and the diaphragm. Reduced internal volumes: 67µl. Possibility of disassembling for inspection.The parts subject to sliding friction are duly coated by PTFE (polytetrafluoroethylene) based self lubricating material. Suitable to shut off liquid and gaseous fluids (verify the compatibility of fluid with materials in contact). Not suitable for use with dangerous fluids listed in Group 1, therefore they are free from CE marking in conformity with article 3 § 3 of the European Directive 97/23/EC (Pressure Equipment Directive). The fluid is just in contact with valve body and isolation diaphragm The internal components are protected from aggressive fluids The fluid is not contaminated as well as not subject to excessive sudden changes of temperature Seals in FFPM or EPDM or FPM Reduced internal volume: 67µl Manifold mounting: there is the possibility to install the valves side by side so to reduce the overall dimensions Universal Function: can be used as NC - NO - Diversion service - Mixing service Possibility of disassembling for inspection Easy replacement of coil >>>
    View the product on sirai.com SIRAI
    SLURRY DISTRIBUTOR - EXACUT

    SLURRY DISTRIBUTOR - EXACUT
    ExaCut - the distributor with integrated heavy object separator The ExaCut has been developed as a decentralised distributor. Thanks to its compact design it fits into the side arm of a dribble bar or a slide-foot unit. Therefore it has a spreading widths of 30 m (100 ft) and more. The ExaCut is popular as a central distributor because of its integrated heavy object separator. Function: The manure slurry enters the side inlet of the ExaCut and flows directly into the distributor housing. The rotor, driven by a hydraulic motor, distributes the slurry to the dribble hoses. The rotor is designed to rotate in both directions to prevent clogging and thus improves operating time. The ExaCut advantages at a glance: integrated foreign object separator compact construction excellent cutting constant distribution short hose lengths when installed on the side arms no start-up V-spreading reversible rotor easy to maintain 24/30/40/48/60 outlets per distributor automatic knife adjustment Pure quality: The knives made of specially hardened steel, which have a self-sharpening effect when moving over the openings of the cutting screen and cut up fibrous material easily. The automatic knife adjustment assures optimal cutting pressure. Foreign objects are collected inside the disposal vessel and can be removed easily. >>>
    View the product on vogelsang-gmbh.com Vogelsang Ltd
    PINCH SOLENOID VALVES

    PINCH SOLENOID VALVES
    Pinch solenoid valves shut off the flow of the medium without turbulence and eliminate dead spaces where the medium can stagnate. The opening and closing action is achieved with a coil-operated pinching device which squeezes a soft tube inserted through the valve. The tube material is the only one to come into contact with the controlled medium. This feature enables the use of the pinch solenoid valve in sterile medical applications. The maximum operating pressures are in the region of 1 bar but they are directly related to the tubing material type, thickness and the power of the solenoid coil. >>>
    View the product on zoedale.co.uk Zoedale PLC
    PILOT PISTON SOLENOID VALVE - L68N25L0F

    PILOT PISTON SOLENOID VALVE - L68N25L0F
    TWO WAY NORMALLY OPEN PILOT PISTON SOLENOID VALVE L68.d DESCRIPTION Mechanical Characteristics: Two Way Normally Open Pilot Piston Solenoid Valve. Suitable for gaseous and liquid media compatible with the body and seal materials specified. Forged brass, nickel plated brass, or stainless steel body. Stainless steel internal moving parts. Solenoid can be rotated 360°. Valve will operate in any position. ELECTRICAL CHARACTERISTICS Light alloy epoxy painted explosion proof solenoid housing. Electrical and mechanical parts certified to ATEX 94/9/CE directive. Suitable to control the flow of flammable and/or inert gases or liquids. Internal and external anti-twist ground connecting screws. Inside terminal board suitable for cable up to 2.5mm. COIL SPECIFICATION: COIL SERIES: B6E Cable Gland Entry**: 1/2” BSP, or 1/2” NPT or M20*1.5mm Coil Housing Protection Class: IP67 Ex Protection Class: II 2 GD (EEx-d IIB, IIC), 11 1/2 GD (EEx-d IIB, IIC) Temperature Class: T6 (t.amb -20 to +40ºC). T5 (t.amb -20 to +55ºC) upon request Coil Insulation Class: F (155ºC) - H (180ºC) upon request Winding Wire Class: H (180ºC) Duty: Continuous (S.I.) 100% ED Power Consumption: AC: 11VA (28VA Inrush). DC 11W Voltage Tolerance: ± 10% (standard). Other voltage tolerances upon request. Insulation: > 1000 Mohm Dielectric Strength: > 2000 V/1' Standard Voltages: 12, 24, 48, 110, 115, 125, 220, 240 VAC DC or AC (50/60 Hz) Other voltages available upon request >>>
    View the product on watervalve.co.uk Red Dragon Ltd
    PINCH SOLENOID VALVES

    PINCH SOLENOID VALVES
    The operating principle of these solenoid valves is basically different from the one of the other series. The pinching device is moved by a solenoid operator and cuts off the fluid by pinching or releasing a tubing in soft silicon (or other soft material). The fluid can flow in either direction with a high rate of flow, without turbulences and without dead spaces. Thus, pinch solenoid valves can control all the fluids that are compatible with the tubing material, protecting them from all contamination, including temperature changes. These characteristics, plus the fact that the tubings are extremely easy to install and replace, make this solenoid valve suitable for a wide variety of applications, particularly the control of physiological, medical and food fluids. Also for these series 2/2 or 3/2 normally closed or open are available plus miniaturised version and latching models. All models are silenced. >>>
    View the product on sirai.com SIRAI
    MICRO SOLENOID VALVES

    MICRO SOLENOID VALVES
    The Sirai Micro range of solenoid valves are suitable for operation with non-aggressive liquid and gaseous media compatible with the valve construction materials and where small size is a premium. They are not suitable for stagnating media, media which is subject to vaporisation or that which will deposit solid, calcareous and encrusted residues. Maximum admissible viscosity: 3?E (22 cStokes). >>>
    View the product on zoedale.co.uk Zoedale PLC
    PILOT PISTON SOLENOID VALVE - L68N25L6D

    PILOT PISTON SOLENOID VALVE - L68N25L6D
    TWO WAY NORMALLY OPEN PILOT PISTON SOLENOID VALVE L68.d DESCRIPTION Mechanical Characteristics: Two Way Normally Open Pilot Piston Solenoid Valve. Suitable for gaseous and liquid media compatible with the body and seal materials specified. Forged brass, nickel plated brass, or stainless steel body. Stainless steel internal moving parts. Solenoid can be rotated 360°. Valve will operate in any position. ELECTRICAL CHARACTERISTICS Light alloy epoxy painted explosion proof solenoid housing. Electrical and mechanical parts certified to ATEX 94/9/CE directive. Suitable to control the flow of flammable and/or inert gases or liquids. Internal and external anti-twist ground connecting screws. Inside terminal board suitable for cable up to 2.5mm. COIL SPECIFICATION: COIL SERIES: B6E Cable Gland Entry**: 1/2” BSP, or 1/2” NPT or M20*1.5mm Coil Housing Protection Class: IP67 Ex Protection Class: II 2 GD (EEx-d IIB, IIC), 11 1/2 GD (EEx-d IIB, IIC) Temperature Class: T6 (t.amb -20 to +40ºC). T5 (t.amb -20 to +55ºC) upon request Coil Insulation Class: F (155ºC) - H (180ºC) upon request Winding Wire Class: H (180ºC) Duty: Continuous (S.I.) 100% ED Power Consumption: AC: 11VA (28VA Inrush). DC 11W Voltage Tolerance: ± 10% (standard). Other voltage tolerances upon request. Insulation: > 1000 Mohm Dielectric Strength: > 2000 V/1' Standard Voltages: 12, 24, 48, 110, 115, 125, 220, 240 VAC DC or AC (50/60 Hz) Other voltages available upon request >>>
    View the product on watervalve.co.uk Red Dragon Ltd
    MICRO SOLENOID VALVES

    MICRO SOLENOID VALVES
    SIRAI® micro solenoid valves constitute a specific response to the growing demand for small size low power control components, created by the constantly increasing integration of electronics and industry. A natural development of general purpose solenoid valves, micro solenoid valves can control a variety of non-aggressive liquid and gaseous fluids. In addition to maintaining an excellent balance between miniaturisation and reliability, the construction solutions adopted provide the possibility of disassembly for cleaning and maintenance. Produced in 2/2 or 3/2 normally closed, open or universal service versions plus proportional control and latching versions. The enormous range of models makes these valves suitable for several applications; the micro solenoid valves can be produced according to customized drawings and with materials and performances different from the standard models in the catalogue to meet specific or particularly complex requirements. >>>
    View the product on sirai.com SIRAI
    PILOT PISTON SOLENOID VALVE - L68T18H0F

    PILOT PISTON SOLENOID VALVE - L68T18H0F
    TWO WAY NORMALLY OPEN PILOT PISTON SOLENOID VALVE L68.d DESCRIPTION SPECIFICATIONS & DIMENSIONS Mechanical Characteristics: Two Way Normally Open Pilot Piston Solenoid Valve. Suitable for gaseous and liquid media compatible with the body and seal materials specified. Forged brass, nickel plated brass, or stainless steel body. Stainless steel internal moving parts. Solenoid can be rotated 360°. Valve will operate in any position. ELECTRICAL CHARACTERISTICS Light alloy epoxy painted explosion proof solenoid housing. Electrical and mechanical parts certified to ATEX 94/9/CE directive. Suitable to control the flow of flammable and/or inert gases or liquids. Internal and external anti-twist ground connecting screws. Inside terminal board suitable for cable up to 2.5mm. COIL SPECIFICATION: COIL SERIES: B6E Cable Gland Entry**: 1/2” BSP, or 1/2” NPT or M20*1.5mm Coil Housing Protection Class: IP67 Ex Protection Class: II 2 GD (EEx-d IIB, IIC), 11 1/2 GD (EEx-d IIB, IIC) Temperature Class: T6 (t.amb -20 to +40ºC). T5 (t.amb -20 to +55ºC) upon request Coil Insulation Class: F (155ºC) - H (180ºC) upon request Winding Wire Class: H (180ºC) Duty: Continuous (S.I.) 100% ED Power Consumption: AC: 11VA (28VA Inrush). DC 11W Voltage Tolerance: ± 10% (standard). Other voltage tolerances upon request. Insulation: > 1000 Mohm Dielectric Strength: > 2000 V/1' Standard Voltages: 12, 24, 48, 110, 115, 125, 220, 240 VAC DC or AC (50/60 Hz) Other voltages available upon request >>>
    View the product on watervalve.co.uk Red Dragon Ltd
    TOTAL SEPARATION SOLENOID VALVES (DRY)

    TOTAL SEPARATION SOLENOID VALVES (DRY)
    Total isolation solenoid valves (DRY) combine the traditional characteristics of strength and reliability with construction solutions that make them particularly suitable for the control of aggressive and/or non-contaminable fluids. The fluid is in contact only with the valve body and the isolation lever or isolation diaphragm; in this way the fluid is protected from any chemical contamination and/or thermic shock. Produced in 2/2 or 3/2 normally closed, open or universal service versions plus miniaturised, silent versions and with a latching actuator. The numerous versions available, the variety of materials employed and the possibility of studying special solutions make this range of solenoid valves particularly versatile, suitable for applications in the food, biotechnology, chemical/pharmaceutical and physiological/medical sectors. >>>
    View the product on sirai.com SIRAI
    DIRECT ACTING SOLENOID VALVE - C03I08C6FX

    DIRECT ACTING SOLENOID VALVE - C03I08C6FX
    DESCRIPTION Mechanical Characteristics: Three Way Normally Closed Direct Acting Solenoid Valve with spring return. Suitable for gaseous and liquid media compatible with the body and seal materials specified. Vacuum. Forged Brass or 316 Stainless Steel body. Stainless steel internal moving parts. Solenoid can be rotated 360°. Valve will operate in any position. ELECTRICAL CHARACTERISTICS Light alloy epoxy painted explosion proof solenoid housing. Electrical and mechanical parts certified to ATEX 94/9/CE directive. Suitable to control the flow of flammable and/or inert gases or liquids. Internal and external anti-twist ground connecting screws. Inside terminal board suitable for cable up to 2.5mm. COIL SPECIFICATION: COIL SERIES: B6E Cable Gland Entry**: 1/2” BSP, or 1/2” NPT or M20*1.5mm Coil Housing Protection Class: IP67 Ex Protection Class: II 2 GD (EEx-d IIB, IIC), 11 1/2 GD (EEx-d IIB, IIC) Temperature Class: T6 (t.amb -20 to +40ºC). T5 (t.amb -20 to +55ºC) upon request Coil Insulation Class: F (155ºC) - H (180ºC) upon request Winding Wire Class: H (180ºC) Duty: Continuous (S.I.) 100% ED Power Consumption: AC: 11VA (28VA Inrush). DC 11W Voltage Tolerance: ± 10% (standard). Other voltage tolerances upon request. Insulation: > 1000 Mohm Dielectric Strength: > 2000 V/1' Standard Voltages: 12, 24, 48, 110, 115, 125, 220, 240 VAC DC or AC (50/60 Hz) Other voltages available upon request >>>
    View the product on watervalve.co.uk Red Dragon Ltd
    GENERAL PURPOSE SOLENOID VALVES

    GENERAL PURPOSE SOLENOID VALVES
    The strength and reliability of this range of solenoid valves make them the ideal solution for a wide variety of industrial applications. They are particularly suitable for the control of water, air, inert gases, steam and non-aggressive fluids in general. The strong compact body and the technical solutions adopted permit reduced overall dimensions, reduced installation times and targeted maintenance. Produced in 2/2 or 3/2 normally closed, open or universal service versions plus proportional control and latching versions. The numerous standard models, the special versions already available in the catalogue and the possibility of developing new valves to satisfy specific needs, mean that SIRAI can provide solutions for the most complex applications >>>
    View the product on sirai.com SIRAI
    DIRECT ACTING SOLENOID VALVE - C03I08D1DX

    DIRECT ACTING SOLENOID VALVE - C03I08D1DX
    DESCRIPTION Mechanical Characteristics: Three Way Normally Closed Direct Acting Solenoid Valve with spring return. Suitable for gaseous and liquid media compatible with the body and seal materials specified. Vacuum. Forged Brass or 316 Stainless Steel body. Stainless steel internal moving parts. Solenoid can be rotated 360°. Valve will operate in any position. ELECTRICAL CHARACTERISTICS Light alloy epoxy painted explosion proof solenoid housing. Electrical and mechanical parts certified to ATEX 94/9/CE directive. Suitable to control the flow of flammable and/or inert gases or liquids. Internal and external anti-twist ground connecting screws. Inside terminal board suitable for cable up to 2.5mm. COIL SPECIFICATION: COIL SERIES: B6E Cable Gland Entry**: 1/2” BSP, or 1/2” NPT or M20*1.5mm Coil Housing Protection Class: IP67 Ex Protection Class: II 2 GD (EEx-d IIB, IIC), 11 1/2 GD (EEx-d IIB, IIC) Temperature Class: T6 (t.amb -20 to +40ºC). T5 (t.amb -20 to +55ºC) upon request Coil Insulation Class: F (155ºC) - H (180ºC) upon request Winding Wire Class: H (180ºC) Duty: Continuous (S.I.) 100% ED Power Consumption: AC: 11VA (28VA Inrush). DC 11W Voltage Tolerance: ± 10% (standard). Other voltage tolerances upon request. Insulation: > 1000 Mohm Dielectric Strength: > 2000 V/1' Standard Voltages: 12, 24, 48, 110, 115, 125, 220, 240 VAC DC or AC (50/60 Hz) Other voltages available upon request >>>
    View the product on watervalve.co.uk Red Dragon Ltd
    SOLENOID VALVES - L172 - L272 - L372

    SOLENOID VALVES - L172 - L272 - L372
    NEW SERIES L172 - L272 - L372: A vast range cared in the minimum details. The care for each detail and the vast range of the proposed versions are only the most salient aspects of these new series of SIRAI® solenoid valves that are characterised by many distinctive features: - maximum robustness and reliability - reduced dimensions - rapid installation - simple and targeted maintenance interventions - sealing O-Rings for winding protection - conformity of the coils to the UL-CSA standards All the characteristics of the standard products, which have been listed herein, can be added to with numerous others available on request: - manual override - valve body in stainless steel AISI 316 - manifold versions (2÷10actuators) - electric connections with flying leads The high automation of the productivity process, which guarantees a low thermal stress level and particularly contained tolerances, as well as the use of superior material represent an even greater guarantee of effective response even in the most difficult of working conditions. >>>
    View the product on sirai.com SIRAI
    DIRECT ACTING SOLENOID VALVE - C03I08D1F

    DIRECT ACTING SOLENOID VALVE - C03I08D1F
    DESCRIPTION Mechanical Characteristics: Three Way Normally Closed Direct Acting Solenoid Valve with spring return. Suitable for gaseous and liquid media compatible with the body and seal materials specified. Vacuum. Forged Brass or 316 Stainless Steel body. Stainless steel internal moving parts. Solenoid can be rotated 360°. Valve will operate in any position. ELECTRICAL CHARACTERISTICS Light alloy epoxy painted explosion proof solenoid housing. Electrical and mechanical parts certified to ATEX 94/9/CE directive. Suitable to control the flow of flammable and/or inert gases or liquids. Internal and external anti-twist ground connecting screws. Inside terminal board suitable for cable up to 2.5mm. COIL SPECIFICATION: COIL SERIES: B6E Cable Gland Entry**: 1/2” BSP, or 1/2” NPT or M20*1.5mm Coil Housing Protection Class: IP67 Ex Protection Class: II 2 GD (EEx-d IIB, IIC), 11 1/2 GD (EEx-d IIB, IIC) Temperature Class: T6 (t.amb -20 to +40ºC). T5 (t.amb -20 to +55ºC) upon request Coil Insulation Class: F (155ºC) - H (180ºC) upon request Winding Wire Class: H (180ºC) Duty: Continuous (S.I.) 100% ED Power Consumption: AC: 11VA (28VA Inrush). DC 11W Voltage Tolerance: ± 10% (standard). Other voltage tolerances upon request. Insulation: > 1000 Mohm Dielectric Strength: > 2000 V/1' Standard Voltages: 12, 24, 48, 110, 115, 125, 220, 240 VAC DC or AC (50/60 Hz) Other voltages available upon request >>>
    View the product on watervalve.co.uk Red Dragon Ltd
    INNOVATIVE TOTAL ISOLATION MICRO SOLENOID VALVES (DRY)

    INNOVATIVE TOTAL ISOLATION MICRO SOLENOID VALVES (DRY)
    The experimentation of a new material for the valve body will turn out in further benefits for customers. Thanks to the specific manufacturing solutions they are realised with, Sirai® total isolation solenoid valves (DRY) are particularly suitable to control aggressive and/or non contaminable fluids. Controlled fluid comes in contact only with the body valve material and the sealing device one. Besides protecting the internal components, this solution preserves the fluid from sudden changes of temperature and contaminations which can modify its chemical-physic characteristics.. About this kind of valves, one of the most important aspects is the quality of the material used. Following its continual research of innovative solutions, Sirai® proposes a DRY micro solenoid valve with the body built with a new material. It offers further advantages even if compared with the relevant ones already ensured by the currently used PSU (Polysulphone). Beyond the wide range of fluids for which is guaranteed the compatibility, the several certifications the material is in conformity with and the high quality of the moulded body finishing, this new model, due to the total light impermeability, is particularly suitable to control photosensitive fluids. Low power absorption and reduced internal volume further ensure the extreme versatility of this micro solenoid valve as well as the perfect correspondence to different applications, mainly in medical, chemical and pharmaceutical industries. >>>
    View the product on sirai.com SIRAI
    C15 COMPUTER CONTROLLED SUBSONIC WIND TUNNEL - ISSUE 1

    C15 COMPUTER CONTROLLED SUBSONIC WIND TUNNEL - ISSUE 1
    C15 Computer Controlled Subsonic Wind Tunnel - Issue 1 A small, benchtop wind tunnel, with visible working section. A wide range of accessories and instrumentation options are available, allowing a comprehensive study of subsonic aerodynamics. The facility is suitable for undergraduate training and project work. ORDERING SPECIFICATION • Small computer controlled wind tunnel for undergraduate teaching • Clear acrylic working section (150mm x 150mm x 455mm) for excellent visibility • Inverter controlled AC fan for accurate speed control up to 34m/s air velocity • Wide range of optional models and instrumentation • Multi-way or single-way quick release connectors between models and manometers • Models mounted in side wall of working section incorporate quick release catches • Complete with data logging and educational software • Electronic watchdog allows for remote operation FEATURES/Capabilities > Computer controlled air flow > 150mm (6” nominal) square working section > Transparent working section for visibility > Wide range of models for both aerodynamics and air flow studies > Choice of water or electronic manometer banks > Quick release connectors on manometer tubes and quick release fastenings for easy model changing > Simple flow visualisation technique incorporated Description The C15-10 is a small wind tunnel designed for benchtop operation. Air is drawn through the working section by a variable speed fan at the discharge end of the tunnel. A honeycomb flow straightener is incorporated at the inlet, and a 9.4:1 contraction ratio ensures well developed airflow through the working section. The working section is fabricated from clear acrylic to give good visibility of the models, and appropriate model connection points are included in the side wall and roof of the working section. A unique feature of the working section is that its entire base is removable to allow the insertion of large or complex models such as the C15-24 Bernoulli Apparatus, C15-25 Boundary Layer Plate or alternative models constructed by the user. The basic wind tunnel is supplied with a USB interface to allow it to be controlled from a PC (not supplied). An electronic pressure sensor mounted in the wall of the working section measures the static pressure, allowing the air velocity to be calculated and displayed on the computer. A manometer bank is required for use with the optional models and instruments. Two options are available, a 13 tube water manometer or a sixteen channel electronic manometer. With the electronic manometer the readings and data logging are integrated with the wind tunnel operational software. With the water manometer the readings can still be integrated and recorded, but need to be entered into the computer manually. The optional models are mounted through a circular hatch (120mm diameter), the models being permanently mounted on a hatch cover to seal the opening (flush with the inside wall of the working section to avoid disturbing the flow). They are secured by quick release clamps on the side wall of the working section. Where necessary the hatches incorporate an angular scale allowing the model to be manually rotated to known angles. A plain, clear acrylic cover is supplied for applications where no model is fitted but this may be adapted by the user to mount alternative models. A second, smaller hatch behind the model mounting position allows the optional Wake Survey Rake (C15-15) to be installed downstream of the various optional models. A plain hatch cover is installed until this option is fitted. Visualisation of flow over the C15-21 Pressure Wing at low angle of attack. enlargeThe working section incorporates a simple technique for flow visualisation around any of the optional models. A lightweight twine follows the flow contour around the model and shows if and where boundary layer separation (breakaway) occurs. A simple adjustment arrangement allows the lengt of twine and its vertical and horizontal position to be easily varied. Three tappings in the roof of the working section, each with a blanking plug flush with the inside wall, allow the flow visualisation system or the Pitot static tube (option C15-14) to be inserted. These tappings are located at the start of the working section, upstream and downstream of the model mounting position. >>>
    View the product on armfield.co.uk Armfield Limited
    ANCILLARY: FLANGE PULLER

    ANCILLARY: FLANGE PULLER
    The Hydratight Flange-Puller is a compact device used to align of pull together flanges prior to the application of bolts and gaskets. The system utilises a 150mm (6") stroke double acting hollow cylinder and can be operated with either with wire rope or threaded bars. A uniquely designed jaw assembly is used to grip and release the rope. A four way valve is incorporated into the unit to provide fast and simple operation and close operator control. Any number of cylinders can be used individually or simultaneously to provide constant load or controlled displacement. Benefits: * Fast, powerful and controllable pulling and alignment for flanges and heavy equipment. * Lightweight and self contained >>>
    View the product on hydratight.com Hydratight Groupe - Actuant
    MONOBLOCK VALVES HC-D2

    MONOBLOCK VALVES HC-D2
    Hydrocontrol's monoblock valve range is one of the widest and most complete in the whole industry. New projects, innovations and technical improvement of the entire production range are costantly being added. Technical specifications: Working sections number...............1-5 Rated flow...............................45 l/min Rated pressure..........................350 bar Spool stroke............................5+5 mm Spool pitch................................35 mm Applications: * Cranes and aerial platforms * Agricultural machines >>>
    View the product on hydrocontrol-inc.com HYDROCONTROL
    SLURRY DISTRIBUTOR - DOSICUT

    SLURRY DISTRIBUTOR - DOSICUT
    DosiCut - the specialist for difficult manure slurries The DosiCut, based on the Dosimat, has an additional cutting unit. First the cutting unit cuts up coarse and fibrous materials. Then the cut slurry flows into a cutting rotor, which is driven by a hydraulic motor. The slurry flows into the rotor which distributes it to the hose outlets. The cutting edges of the rotor slide over the cutting screen, where fibrous materials are once again cut up. Because of the pre-positioned cutting unit, the DosiCut is ideal for harsh manure slurries and delivers the highest possible spreading accuracy. These are the advantages of the Dosicut: compatible with all slurry tanks excellent cost-performance ratio up to 60 hose outlets provides protection against fibrous material, which is again cut up (important for cattle manure with straw) highest possible spreading accuracy easy to install it yourself For decades the Vogelsang distribution heads have been subjected to the harshest operating conditions. This has allowed us to carry out continuous monitoring of quality and optimisation. The DosiCut can be mounted easily to all known spreading systems and tanks. Installing the DosiCut to existing tanks is quick and easy The DosiCut's spreads more accurateley than every other mineral fertilizer spreader does. Independent institutes have measured variation coefficients of less than 5%. The DLG considers a variation coefficient under 10% as very good. >>>
    View the product on vogelsang-gmbh.com Vogelsang Ltd
    LINEAR SOLENOIDS

    LINEAR SOLENOIDS
    RAM Company linear solenoids encompass a vast array of design features and design applications, with strokes ranging from .005" to 3", push or pull performance, and pressurized or non pressurized cavities. We are confident that we can meet any reasonable performance requirement, including those related to the following: • Magnetic or mechanical latching • Positional devices • Fast response time • Redundant coils • Manual override • Long life • Low power consumption • Harsh environmental conditions • Extreme vibration and shock • Operation in a vacuum • Extreme force requirements • PWM capabilities >>>
    View the product on ramcompany.com RAM Company
    SV SERIES SOLENOID VALVES

    SV SERIES SOLENOID VALVES
    Port Sizes & Connections: 1/4? to 1/2? NPT or AND AS4395 (SV10 only) Operating Ranges: up to 6,000 PSIG Electical: 12, 24, 115 VDC & 115, 220 VAC Connections: Female Pipe NPT Female Tube AND, AS4395 (MS33656) Body Materials: Aluminum Brass 303 Stainless Steel Seat Materials: Kel-F Nylatron Polyimide (Vespel) Options: SV10-30 = Manual Override, Position Indicator, 1/2" Conduit SV400 = Manual Override Features: * High Pressure & Flow Capacity * Less Susceptilbe to Contamination * 3-way 2-position, 2-way Normally Closed or 2-way Normally Open >>>
    View the product on circle-seal.com Circle Seal Controls Groupe - CIRCOR
    C1MKII COMPRESSIBLE FLOW UNIT - ISSUE 1

    C1MKII COMPRESSIBLE FLOW UNIT - ISSUE 1
    C1MKII COMPRESSIBLE FLOW UNIT - Issue 1 A versatile apparatus, based around a multi-stage, air compressor, designed to teach the concepts of compressible flow. The basic unit contains all that is required to demonstrate the fundamental principles, but also an accessory (C1-MKII-30) is available containing a number of interchangeable test sections to give a wider knowledge and understanding to the student. A further accessory (C1-MKII-35) allows full compressor performance and characterisation tests to be carried out. This new MkII version offers greatly improved flexibility and ease of use. It also benefits from electronic instrumentation avoiding the need for mercury manometers ORDERING SPECIFICATION • A bench top unit designed to demonstrate and teach the fundamentals of compressible flow to engineering students • Complete with convergent-divergent duct capable of achieving Mach-1 velocity at the throat • Advanced torque-vector speed control with electronic torque measurement • Four electronic pressure sensors • Test Sections made from clear acrylic • Additional test sections available (6 off) complete with bench-top stand • Compressor test accessory available • Data Logging accessory, complete with educational software and electronic temperature sensor Features > Variable speed compressor with accurate electronic speed control > Electronic pressure sensors > Standard unit includes convergent-divergent duct designed to produce Mach 1 velocity at the throat. > Data Logging option Experimental Capabilities Basic Unit (C1-MkII):- > Phenomenon of choking in a convergent-divergent duct > Pressure flow characteristic of a convergent-divergent duct > Effect of Compressibility on flow equations > Determination of Gamma for Air Added Capability with C1-MkII-30 Accessory > Simple pipe friction > Variation of friction coefficient with Reynolds number > Friction coefficient for compressible flow > Pressure recovery across a sudden enlargement > Pressure drop across a pipeline orifice > Pressure drop across a 90° bend Added Capability with C1-MkII-35 Accessory > Centrifugal compressor performance characteristics > Energy balance for compressor Description - C1MKII: COMPRESSIBLE FLOW UNIT The C1-MkII equipment comprises a multi stage air compressor, complete with a test section and a throttling valve, plus an electronics console containing the necessary controls and instrumentation. The four stage compressor is driven by a three phase AC motor via a fully guarded drive belt. The compressor speed can be varied using an advanced torque-vector frequency inverter which gives stable and accurate speed control plus direct electronic read-out of the torque produced by the motor. The compressor is fitted with an outlet duct incorporating a throttling valve, which allows the flow to be varied. enlargeConvergent-divergent test section The equipment is supplied with a convergent-divergent test section, fitted on the compressor inlet, designed to produce Mach-1 velocity at the throat. The duct is fabricated from clear acrylic, enabling the student to see the construction and the profiles. A pressure sensing ring tapping is provided at the inlet, at the throat and at the discharge end of the diffuser. This duct allows all the major concepts of compressible flow to be demonstrated. The electronics console includes two high range and two low range differential pressure sensors plus a control for motor speed and displays for the compressor speed, the pressures and the motor torque. >>>
    View the product on armfield.co.uk Armfield Limited
    ANCILLARY: NUTSPLITTERS

    ANCILLARY: NUTSPLITTERS
    Hydratight offers a range of Nut Splitter tools utilising a powerful, lightweight hydraulic cylinder to drive a precision engineered cutting blade into the flat of the nut. The blade, with 3 cutting edges, has been designed for maximum life and minimum installation time, and can be changed in seconds if required. With a range of cylinders and interchangeable heads, the tools are designed to cover all ANSI flanges up to 36". The Hydratight Nutsplitter is a fast, sure and safe method to remove corroded or seized nuts without the need for hot cutting, chiselling or grinding. Features include: * Spring return cylinders for topside use * An optional double-acting hydraulic cylinder is available for subsea use. * Cutting blade can be easily preset to prevent damage to bolt threads. * Visual bolt diameter scale to aid setting of cutting blade. * Integral pressure relief valve to prevent over pressurisation. >>>
    View the product on hydratight.com Hydratight Groupe - Actuant


    12Suivant >>Fin >
    Go to page


      Search    
     
     
     
    Search
    See all of the sector's products : Hydraulics - Pneumatics