Selection of 41 products among
120
MODULAR ELECTRIC CONTROL PANEL
APPLICATION
Whatever the type and the number of equipments on an industrial site, they can be controlled from a completely modular electric panel.
Based on a steel cabinet (dimensions and colour
upon request) and equipped with tracks and all connection and protection basic equipments, we can build a control panel perfectly fitting the requirements of the site and/or the equipment, including all the necessary connection, control and protection components, with, if required, a specific programmable logic controller designed and manufactured by TEC AUTOMATISMES according to the schedule of conditions built by the customer.
TECHNICAL FEATURES
Steel cabinet, painted acording to the customer's requirements, equipped with one or two doors (following the dimiensions an the use of the cabinet). Possibility of having visualisation display and control components on front face.
Functions will be those you need, among which :
* protection,
* regulation,
* defaults detection,
* permutation between the equipments of the site in case of default,
* measure of the intensity,
* measure of the operation time,
* measure of the number of operations held,
* storage, review and synthesis of the defaults.
COMPONENTS
As it is a completely modular control panel, it is possible to include as many components as necessary, among which :
* Circuit-breaker (s) for the protection against short-circuits and overloads,
* Contactor (s),
* on-off switches,
* Reset push-button (s),
* Visualisation LED (s),
* Standard programmable controller,
* Specific programmable logic controller (designed by TEC AUTOMATISMES >> please contact us).
Dimensions : dimensions depend on the components to be included in the cabinet and the site on which it will be mounted.
>>>
View the product on tec-automatismes.com
Tec-Automatismes
INTELLIGENT DISTRIBUTION BOARDS (IDB™)
Assessing the energy consumption of non-essential loads can highlight sources of energy wastage and boost the systems efficiency of your critical power supply.
Operating as a slave node from a
Mardix - or 3rd party - remote monitoring system, the iDB™ is an intelligent distribution board that enables accurate energy measurements to be recorded for individual circuits.
Intelligent distribution boards are a simple, space and cost saving method for loss of circuit supplies and circuit overload indication and, due to our pre-installation testing, they are very reassuring to have as part of your power monitoring solution.
Intelligent Distribution Boards in focus
Solution for loss of final circuit supplies and circuit overload indication
Continuous record of events through alarm logs
Reduction in external cabling costs with a single Cat5e/6 connection
Simplified interface to Mardix or 3rd party remote monitoring systems
Manage effectively with final circuit energy (kWh), real power (kW), current (A), apparent power (kVA) and power factor monitoring, using the established Branch Power Meter (BPM)
Easy to interrogate, remote 7.4" colour touchscreen displays all values and alarms (optional)
100% pre-installation testing of all values, status and alarms
>>>
View the product on mardix.co.uk
Mardix Switchgear
ALUMINIUM ENCLOSURE - ALUCASE
Series: aluCASE
Ingress protection: IP 67 or IP 69K
Enclosure sizes: 14 dimensions from
L x W x H 120 x 90 x 60mm to 280 x 170 x 90mm
Area of application: Mechanical engineering, steering
engineering, control engineering, installation engineering, outside
1.
Integrated recesses for membrane keypads
2.
Enclosure can be installed after closing
3.
Design covers for screwless appearance
4.
Integrated lid supports
5.
Exterior hinges without visible screws
6.
Access is safeguarded by means of insert locks
TECHNICAL DATA
aluCASE
Enclosure
Die-cast aluminium:
EN AC-44300 DIN EN 1706
(GD Al Si 12/ DIN 1725).
1° mould slope for casting ejection - Internal measures diminishing circulatory towards enclosure bottom by 1°.
Lid-screws
Captive screws made of stainless steel 1.4567.
Integrated recess
1,7 mm recess in the lid for membrane keypads and front panels.
Integrated lid supports
PP (polypropylene).
Clip-on design covers
Standard: Plastic POM (polyoxymethylene) grey RAL 7040 - anodised aluminium on request.
Exterior hinges
Without visible screws, anodised aluminium.
Ingress protection
IP 67 / EN 60529
On request IP 69K / DIN 40050
Gasket
Thermoplastic designed gasket, made by forprene, siliconfree, temperature range -40°C up to +120°C.
Coating
Standard powder coated grey RAL 7040, special colours (also metallic silver) on request.
>>>
View the product on rolec.de
ROLEC Geh?e-Systeme
ATLAS IV LOGGERS
ATLAS IV Logger Outstations are housed in wall mounted steel IP55 enclosures normally located adjacent to the meters being monitored or at some other convenient point to minimise plant cabling
costs.
A typical Logger Outstation will have 40 inputs in addition to the half-hour synchronisation pulse from the Electricity Board metering but can have 8, 40, 72 or 104 inputs. Multiple Logger Outstations can be readily accommodated and there is virtually no limit to the number of meters that can be monitored. These Logger Outstations need not be at the same geographical location, modem communication is a simple option.
The Logger Outstations are normally mains powered but in the event of local power loss ATLAS IV loggers will continue to operate fully for up to 5 days subject to the condition of their own trickle charged batteries. The ATLAS series system software provides a warning of battery operation to initiate user investigation.
For most applications it is assumed that pulses will be accumulated into half hour [15 minutes is an option] consumption periods, however real-time, on-line, minute by minute, monitoring of all inputs can be carried out when more detailed knowledge of plant operation is required. With 'half hour' monitoring the Logger Outstation has memory capacity to provide for a minimum of one month of data before it is necessary for the System Computer to copy this recorded data, if required additional memory can be added to increase the period of data stored at any time in the logger.
>>>
View the product on newfound-energy.co.uk
Newfound Energy Ltd
ALUMINIUM JUNCTION BOXES SERIE 3000
MATERIAL
Box and cover manufactured in aluminium alloy.
SURFACE FINISH
Coated with grey epoxi polyester powder (similar to 7042 RAL) with coarse texture, made by electrostatic projection and dry
into an oven to 180-200ºC.To obtain a perfect degreasing and absolute absence of dirt and dust, a pre-treatment is carried out before the surface finish, which consists of a neutral-type degreasing
followed by a non-chromic conversion to aluminium (i.e. no damage to the enviroment), finished whith a dry to 80ºC.
This treatment provides colour with an excellent resistance against UV light and temperature changes, as well as a high protection against chemical agents (most of acids, alkalis and oils at room temperature), saline mist and wet environments.
CLOSURE
By means of captive flush screws. Captivity prevents screw from loss. Screws are manufactured in a steel that has been provided with a D-1000 anti-corrosion treatment, an metallic-grey-colour inorganic non-electrolytic coating consisting of zinc, aluminium and chrome oxide layers. This treatment protects metallic parts against corrosion thanks to an electrochemical process: the cathodic protection, that provides a high resistance against bimetallic corrosion with aluminium.
The resistant finish in epoxi polyester powder together with the coating of the screws stock allow boxes series 3000 to pass with success the test of 1000 hours in chamber of neutral saline mist according to ISO 9227:90 (equivalent to standard UNE 112017:92).
WATERTIGHTNESS
An elastomeric gasket embedded in the cover provides the box with a degree of protection of IP-65, according to UNE 20324, CEI 529 and EN 60529. By order, IP-67 protection grade can be supplied.
ENTRIES
The number of entries that may be carried out is indicated in the general characteristics of each box. Entries may be threaded following several standars, being the most common in metric thread according to ISO 261 and Pg thread according to DIN 40430.
FIXING
Wall mounting by means of adjustable lugs in order to place the box in any position.
MOUNTING PLATE
Optional. The box has inside and at the bottom thickness parts to fix the mounting plate on with screws without external drilling.
>>>
View the product on aplei.com
APLEI
FUTURENERGY 1KW UPWIND TURBINE
Our New rugged Upwind Turbine range is based on 2 years of real-life testing and development in Warwickshire and the Uplands of Scotland.
Using our unique Permanent Magnet Generators, combined
with our Hi-Spec Wind Turbine Blade Sets, these furling turbines create very useful power in low wind conditions, and over 1000W in winds of 12.5m/s.
Available in 12V, 24V & 48V DC versions, they are suitable for battery charging, water/air heating and Grid-Tie installations.
We don’t recommend, nor will we authorise the installation of any of our turbines in ‘building-mounted’ installations, other than for steel-framed and other industrial buildings. These turbines are tower-top ready (turbine sleeve has a 50mm diameter hole to accept 48.3mm standard scaffold pole). We are currently developing our own tower kits & will post more information when it is available.
For a complete guide to towers, system designs and grid-tied inverters, see this Turbine Guide
Your turbine will be supplied in 2 shipping containers, weighing a total of 27Kgs, and you will be required to attach the tailfin and blades to the main turbine housing. All instructions will be supplied to guide you through the simple assembly, and you should be ready to mount and use your turbine in only a few hours. For battery charging applications we suggest that you use a suitable charge controller to prevent your batteries from becoming overcharged.
• Mechanically furling tail fin for high wind protection
• Unique high-spec Permanent Magnet Generator
• 5 top-grade glass filled nylon turbine blades
• Sealed bearings in mast-mounting shaft
• 60 Amp rated slip-ring prevents cable-twisting
• Aerodynamic profile design
• Patented anti-vibration locking washers
• Rugged and simple, with a minimum of parts and simplicity of design
• Zinc-plated and Stainless Steel with powder-coated and anodised aluminium for optimal corrosion and weather resistance
• Manufactured in the UK
Technical Specifications
Nominal Power Output - 1000W (600W / 12v Version)
Start-Up Wind Speed - 2.5m/s
Cut-In Wind Speed - 3.2m/s
Rated Wind Speed - 12.5m/s
Survival Wind Speed - 50m/s
Rotor Diameter - 1.8m
Number of Blades - 5
Generator Type - 3-Phase Perm Magnet (this is rectified to DC inside the turbine, giving a 2-wire DC output)
Weight - 22Kgs
Suitable Tower Diameter - 50mm
Noise: LAeq 35dB @ 5m/s @ 5m behind rotor
Noise: LAeq 54dB @ 7m/s @ 5m behind rotor
ROHS compliant
>>>
View the product on futurenergy.co.uk
Futurenergy Ltd
WATER COOLED CABLES
Suitable for high-current transmission, e.g. within melting and heating plants, e.g. in
arc, ladle, induction, reduction, vacuum or graphite furnaces
the steel, foundry, non-ferrous metal or glass
melting industries
medium or high frequency current
We produce water-cooled cables with cross-sections up to 6000 mm² matched to their respective application, e.g. as
single or multiple conductor cables
hollow cables
with hose screw connectors or turning devices
high power cables for arc furnaces
Fast repair of all common types of cable also belongs to our service and delivery program.
Construction and applications
Single conductor cables manufactured in the cross-section ranges up to 1000 mm² and up to 1200 mm² as multiple conductor cables. Ideally suited for mains frequency applications, e.g. in induction plants in the steel, foundry, non-ferrous metal or glass melting industries, but applications are also feasible in graphite furnaces. Our cables are used wherever high currents are transmitted with relocatable loads or in adverse deployment conditions in heating operations. As a result of the construction selected for the inside conductor, combined with the special water-cooling hoses and our manufacturing technology, we offer extremely flexible, space-saving components for high current transmission.
Connectors and cooling
All standard connectors are manufactured from E-Cu material and are crimped on the E-Cu conductor without soldering. Using druseidt crimping technology, only materials of the same conductance value are connected together, without the use of additional materials, such as solder or welding additives. This ensures the best possible loss-free current transmission. The geometry and positioning of crimping facilitates the best possible coolant water throughput.
Coolant water connection holes / hose nipples
Thread holes of a sufficient size are made in the connectors to hold hose nipples. The cable is delivered without nipples as standard. These can be additionally ordered as accessories. It is also possible to set the cooling holes at other orientations than the standard 90° or to change the thread size.
Coolant water hoses
The flexible coolant water hoses we use are fitted with additional heat protection against radiated heat and liquid metal splashing. The hose casing is flame retardant and self-extinguishing. The breakdown rating is 6 kV/mm. The maximum permissible operating pressure for the cable is 6 bar. All cables are tested with a pressure of 10 bar prior to shipping.
Cable with additional shims
To ensure secure fixture, especially in the case of long water-cooled high-current cables, all single conductor cables can be fitted with one or more shims. These additional solid parts fitted in the conductor guarantee easy fitting at the labelled points by means of clamping or holding devices. Squeezing the hose together and the ensuing damage, as well as the reduction in water flow throughput, are thereby avoided.
Special designs and cable repairs
In addition to our standard designs, we also manufacture all cable cross-sections with connectors, as well as offering customised designs (e.g. replacement parts for all common electro-furnaces from the well-known manufacturers). We also undertake cable repairs at short notice, both for our cables and those of other manufacturers.
>>>
View the product on druseidt.de
Druseidt
