Detection: suppliers, wholesalers and manufacturers on Hellopro
Search   


Detection :

728 products
Select the category
    Selection of 97 products among 728
    INSPECTION OF GLUE BEAD DISPENSING - CORDIA M2D

    INSPECTION OF GLUE BEAD DISPENSING - CORDIA M2D

    Inspection of robot-mounted adhesive dispensing CORDIA M2D when setting up on a robot nozzle is a configuration adapted to body in white for long welds. Inspection of the weld on 360°C, during production flow, in real time, in any ways (curve, turn, etc.) via a sensor located around the robot nozzle. CORDIA M2D detects the interruptions of the weld, its width and positioning flaws. >>>
    View the product on edixia.fr Edixia
    STATOR CORE FAULT DETECTION - EL CID EVOLUTION KIT

    STATOR CORE FAULT DETECTION - EL CID EVOLUTION KIT

    Electromagnetic Core Imperfection Detection (EL CID) Testing is accepted world-wide for reliable and safe detection of stator core inter-laminar faults (CIGRE, 2004). Since the May 2007 merger of ADWEL and IRIS Power, the EL CID Evolution is now available from Iris Power. Originally developed by the CEGB in England, the ELCID Evolution is the third generation of this reliable, easy to use, stator core test equipment. EL CID Evolution tests the condition of a stator core in less time and with lower costs than the earlier EL CID models. The EL CID test may be equally applied to turbo-generators, hydro-generators and large motors. EL CID Evolution Kit Features: Faster test scanning (up to 120mm/sec @60Hz) Easier excitation calculations Simpler testing with dual Chattocks User-friendly LCD display to guide user operation Combine step-iron data with main core traces Easily identify “hot spots” via color map display Fully compatible with existing data >>>
    View the product on adwel.com ADWEL
    MAS-D-TEC® DAIRY MASTITIS DETECTION

    MAS-D-TEC® DAIRY MASTITIS DETECTION

    MAS-D-TEC by Wescor offers a new development in electronic technology: Early Mastitis Detection. It meets the requirements of a modern dairy operation and provides the manager with a simple, convenient and instantaneous means of detecting subclinical mastitis. Conductivity increases markedly with the onset of mastitis infection. MAS-D-TEC uses sophisticated technology to detect increases in conductivity long before other clinical symptoms and signs are evident. >>>
    View the product on cspuk.co.uk CSP
    BEER KEG LEAK DETECTION - VERI-KEG

    BEER KEG LEAK DETECTION - VERI-KEG

    Dimaco’s Veri-KEG is a leak detection system, which detects leaks from worn out valve rubber seals. It is an optical system, which uses a well proven imaging technique to reliably inspect a mixed flow of kegs fitted with new and old spear types, of varying seal sizes and profiles. Features : Micro leaks from keg valve In mix flow of new and old kegs In motion inspection (No Stoppage) Automatic height adjustment The Benefits : Prevents leaking kegs reaching trade Improves product quality Reduces return costs >>>
    View the product on dimaco.co.uk Dimaco (UK) Ltd.
    FAST ACCURATE SF6 LEAK DETECTION

    FAST ACCURATE SF6 LEAK DETECTION

    SF6 GasCheck P1 is designed for the location, leak testing and measurement of SF6 gas in high voltage electrical switchgear and many other leak detection applications. This instrument has none of the problems of registration, storage and transportation associated with instruments based on the radioactive source ECD principle, which also require high purity and high pressure Argon gas. >>>
    View the product on edie.net/Ireland Edie Ireland
    GAS DETECTION SENSORS

    GAS DETECTION SENSORS

    Modern gas sensors or detectors are accurate, reliable, long-life components which are used routinely in many applications including:- Air-conditioning LPG safety Natural gas burner safety Carbon Footprint monitoring Alcohol level detection Gas Chromatography Landfill emission monitoring Refrigeration Semiconductor processing safety Food packaging Scuba Diving Medical Respirators Medical Incubators Anaesthesia systems Envin offers what is possibly the most comprehensive range of gas sensors for a wide range of gases and applications employing the latest Semiconductor and Electrochemical technologies. >>>
    View the product on envinsci.co.uk Envin Scientific
    ANALYTICS - SHAPED-BASED DETECTION

    ANALYTICS - SHAPED-BASED DETECTION

    Shape-based detection/object tracking in analytics filters, such as virtual tripwire, can be used in many applications. It can alert CCTV operators when a high-sided vehicle or ship approaches a low bridge. Alternatively, it can be used to distinguish between an animal approaching a boundary fence, and an intruder. In recorded video footage, this feature can be used to analyze the types of vehicles using a road, and what time of day they are using it. >>>
    View the product on indigovision.com Indigovision
    SF6 GASCHECK P1 - FAST ACCURATE SF6 LEAK DETECTION

    SF6 GASCHECK P1 - FAST ACCURATE SF6 LEAK DETECTION

    SF6 GasCheck P1 is designed for the location, leak testing and measurement of SF6 gas in high voltage electrical switchgear and many other leak detection applications. This instrument has none of the problems of registration, storage and transportation associated with instruments based on the radioactive source ECD principle, which also require high purity and high pressure Argon gas. Data Storage and printing at the touch of a button. Although designed for SF6 in switchgear other gases with a high affinity for electrons, such as refrigerant R12 may also be detected. The negative ion capture (NIC) detector is combined with `smart sensor´ technology. There are no items requiring maintenance or service in the handgun or console. This instrument meets the demands for quality and traceability to International standards as required by today's industry. SF6 GasCheck P1 is now also available with a highsense option detecting leaks as small as 1 x 10-8 ml/sec! Features include: * No radioactive detector * No argon or other pressurised gases required * Smart sensor technology, detachable probe * Display units cc/sec, gm/yr and ppm * Touch screen with help menus * Lightweight 3 button handgun * Data storage and printing * No training required, switch on and go * Transit: robust steel transit case for export shipping * Large leaks present no contamination problems with rapid clear down * Ultra high sensitivity with a 1 x 10-8 ml/sec highsense option >>>
    View the product on ionscience.com ION Science
    FREEFALL METAL DETECTION

    FREEFALL METAL DETECTION

    Loma IQ² FreeFall Metal Detection Systems provide highly-sensitive metal detection for all types of gravity-fed products, such as: Snack Foods Frozen vegetables Cereals Sugar Coffee/tea Flour Easy set up Loma IQ² FreeFall has Loma's unique Automatic Product Learn system. The metal detector can be automatically calibrated - even under production conditions when the product is constantly flowing through the detector. Flexible Flexible and compact Loma IQ-FreeFall Metal Detectors can be installed into existing processing lines. Compact Loma's Contained Field (CF) technology means that the required metal free area is minimal, ensuring that the system length is kept to the minimum. Typical system parameters for bulk flow FreeFall systems with a reject Pipe diameters 4" 6" 8" System lengths 31" 34" 43" Thruput *6 T/hr *13.5 T/hr *24 T/hr >>>
    View the product on loma.com Loma
    LOMA PRODUCTS - ULTRA HARSH WASHDOWN METAL DETECTION HEAD

    LOMA PRODUCTS - ULTRA HARSH WASHDOWN METAL DETECTION HEAD

    Rapid temperature changes, vigorous and caustic wash-down regimes, high humidity and saline environments are just some of the factors that can take a toll on even the toughest environmental standards. To provide added peace of mind in these 24/7 environments, Loma has a range of ultra harsh environment metal detection heads, IQ3 Max. Loma IQ3 Max features an advanced aperture seal with enhanced environmental protection to ensure complete waterproofing and reliability and has all the features of the Loma-IQ3. >>>
    View the product on loma.com Loma Systems
    POINT SLUDGE BLANKET DETECTION AND CONTROL - MCS-16S

    POINT SLUDGE BLANKET DETECTION AND CONTROL - MCS-16S

    The MCS-16S combines SS measurement and sludge interface detection in a low cost control unit. This unit is intended for continuous operation to check the sludge blanket interface and produce the appropriate control signals for continuous desludging. Typical applications can be found in primary and secondary settlement tanks. Up to 16 SH2b/US100 probes can be interfaced to the unit, providing up to 8 settlement tanks with high and lowblanket detection. >>>
    View the product on mdinstruments.co.uk MD Instruments Ltd
    SAFETY DETECTION SYSTEM - 3D PANACHROME

    SAFETY DETECTION SYSTEM - 3D PANACHROME

    The revolution in lift entrance protection Panachrome 3D is the revolutionary new lift safety detection system offering maximum passenger protection. The traditional infra-red light curtain is coupled with 3D detection in the landing zone and coloured indicators that operate on door movement. The detectors will illuminate green if the doors are opening, flash red as they start to close, and stay red as the doors move together. Product Information Complies with EN81-70 legislation - Disability Discrimination Act Coverage exceeds minimum requirements of 25mm to 1800mm Coloured red/green indicators to highlight door movement Dense infra-red 154 beam light curtain 4m pluggable cable 4m range Can be used on centre-opening and side-opening doors IP rating of IP55 for Panachrome 3D detectors Panachrome Patent applied for >>>
    View the product on memco.co.uk Memco
    PASSIVE INFRARED (PIR) DETECTION - EX-35T/35R

    PASSIVE INFRARED (PIR) DETECTION - EX-35T/35R

    Security Grade 2 Environmental Class 2 The EX Series provides low cost detection without compromising quality. It combines a unique dual-purpose lens, patented Multi-Focus Technology and Selectable Sensitivity to create four precise detection patterns - wide-angle or long-range and multi-level or pet alley. This makes the unit very versatile and ideal for many applications where the need is for reliable detection on a tight budget. The unique spherical lens design makes the unit attractive yet robust and, combined with patented Multi-Focus Technology, it eliminates sensitivity problems frequently caused by changes in detection patterns. Features Spherical Lens Design Wide angle or long range detection in Multi-level or Pet Alley patterns High detection sensitivity Stable even in high temperature conditions Selectable pulse count: 2 or 4 100% factory tested for reliability Coverage 11m x 11m 17m x 1.7m (Dual Purpose Lens / Long Range) Options EX-35T – standard model EX-35R – low current battery version for wireless applications Accessories FA-1W Multi-angle wall mounting bracket FA-2C Multi-angle ceiling mounting bracket >>>
    View the product on optexeurope.com OPTEX Europe Groupe - OPTEX Group
    GAS DETECTION

    GAS DETECTION

    Fixed Gas Detection Sniffer Specifications: 8 or 16 point systems (can be set to scan less channels) Upto 4 analysers or detector inputs (4-20mA) 2 alarm level per sensor Falling or rising alarm levels Alarms set individually for each sensor Display to indicate channel(s) in alarm Flow switch input for low flow alarms Quickscan mode with adjustable quickscan level Internal Sample Pump Data logging output >>>
    View the product on pcpgroup.ie PCP Group
    BLISTER PACK LEAK DETECTION SYSTEMS

    BLISTER PACK LEAK DETECTION SYSTEMS

    Blister Pack Leak Detection Systems The VeriPac 225/BLV inspection system evaluates and analyzes blister package integrity with precision and repeatability. The core technology of the VeriPac 225/BLV is based on an ASTM approved vacuum decay leak test method that was developed using VeriPac instruments, with the addition of special vision imaging technology to easily identify the location of defective blister cavities. The VeriPac 225/BLV provides non-destructive, non-invasive inspection of multi-cavity blister packaging made with any material, flat or glossy finish, printed or non-printed surface. Each test cycle is rapid with test results available in numerical, statistical and image formats. >>>
    View the product on peco-europe.com Peco Europe
    SUPERIOR VOC DETECTION  2020COMBOPRO

    SUPERIOR VOC DETECTION 2020COMBOPRO

    Two Instruments in One... Superior VOC Detection with Benzene Measurement Capability The 2020ComboPRO represents the newest advancement in volatile organic compound (VOC) detection coupled with operational simplicity. It is designed to respond quickly in emergency response situations while providing plenty of brainpower when you need it for comprehensive data analysis. With its proven photoionization (PID) technology and extended range of 0.1 to 10,000ppm, the 2020ComboPRO measures a wide variety of chemicals for environmental, industrial hygiene, and emergency response applications. >>>
    View the product on photovac.com Photovac
    PROFOMETER 5+ REBAR DETECTION SYSTEM

    PROFOMETER 5+ REBAR DETECTION SYSTEM

    For a user-friendly, compact and accurate way to detect reinforcement bars and mesh, to measure their cover depth and determine the bar diameter, PROFOMETER 5+ is simply the best solution available! Application Typically, PROFOMETER 5+ is used to perform checks after formwork is removed, for quality control purposes and to assist in the evaluation of remedial or repair work. Detection & data-capture PROFOMETER 5+ uses non-destructive pulse-induction technology to locate and measure, whilst the Proceq ProVista Anaysis Software allows fast and easy data transfer to a laptop or PC. Accuracy & stability The accuracy of PROFOMETER 5+ is up to 50% greater than industry standards require and corrections can be made to compensate for adjacent bars and external influences. Range & scope Not only can the Universal Probe can measure two concrete cover regions at the push of a button, but it can also measure bar diameter at the same time. Standard Instrument (Model S) This new generation version of PROFOMETER 5+ has the following features: * Detection of rebar and other metal building elements and their orientation * Rapid location of rebar with insufficient cover thickness * Correction, for the influence of close parallel bars, on diameter and cover measurement * Correction, for the influence of adjacent bars, in congested 2-layer arrangements * Compact, user-friendly indicating device with display backlight option * Optical and acoustic locating aids * Can be operated in metric or imperial units * Storage of individual cover values and statistical analysis * Direct printing capability * Simple data transfer function to PC via the ProVista Analysis Software, included with the instrument. * Spacious hard-top equipment case Deluxe Instrument (Model SCANLOG) The SCANLOG version with the ScanCar probe carriage system features two additional functions for more extensive site evaluations: * "CyberScan" function for visual display of rebar location * "Measuring with Grid" function for grey-scale display of concrete cover values >>>
    View the product on proceq.com PROCEQ
    ALLERGEN DETECTION SYSTEM

    ALLERGEN DETECTION SYSTEM

    New rapid detection technology, developed by Cambridge based Acaris Healthcare Solutions is incorporated into an early warning system for both medical and anti-terrorist applications. The handheld device, employs a credit card-sized, single use assay with integral vacuum collection filter, which is used to gather and rapidly test powders and airborne materials. Designed for use in domestic and commercial environments, the rapid test system for the detection of household dust mite allergens, was developed by Rapitypes and then produced in low volumes from soft tooling, prior to extensive testing by the client. With a growing incidence of asthma in the Western World, in which children become sensitised to allergens at an early age, the new system helps concerned parents to detect potential problems within their child's environment easily and inexpensively. >>>
    View the product on rapitypes.com Rapitypes Limited
    LEAK DETECTION SYSTEM - ILS500

    LEAK DETECTION SYSTEM - ILS500

    Leak Detection System ILS500 is a complete system for leak testing, tracer gas handling, tooling control and test sequencing. It comprises three main modules, housed in a compact cabinet: the Controller Unit, the Detector Unit and the Operator Interface Unit. Equipped with a wide range of accessories, the ILS500 meets all test requirements and offers a large variety of test possibilities. It is available in Standard, Combi Probe and Filler version. >>>
    View the product on sensistor.se Sensistor Technologies
    ACOUSTIC WATER LEAK DETECTION  - AQUAPHON® AF 100

    ACOUSTIC WATER LEAK DETECTION - AQUAPHON® AF 100

    The Aquaphon AF100 is far more than simply a cable avoidance tool. The AQUAPHON® AF100 shows you: Depth to service. It is very useful to know if you are tracing the correct service and knowing the depth of what you are tracing can give you more information. A water pipe is unlikely to be buried, (but it has been known!), at 300mm but a telecommunication cable might well be!Minimum & Maximum detection methodsThe Minimum method is particularly useful for tracing pipes, very accurately, instead of increasing at the centre of the pipe the signal decreases giving a far cleaner “centre”. >>>
    View the product on sewerin.co.uk Sewerin Ltd
    SYSTEM FOR LEVEL DETECTION - BMS

    SYSTEM FOR LEVEL DETECTION - BMS

    BMS is a bubbling system for level detection based on the measurement of hydrostatic pressure caused by the liquid contained in the tank. The working principle is founded on the measure of the pressure value needed to maintain a constant and regular air flow through a pipe probe open in the bottom and submerged into the liquid. At any level variation of the liquid in the tank corresponds a variation of the hydrostatic pressure applied on the air outgoing from the probe pipe; these pressure variations are precisely detected by the 27M P/I converter and converted into a standard 4÷20 mA electric signal. PR3 regulator keeps constant bubbling air flow at any level value, assuring high precision measurement. >>>
    View the product on valcom.it/eng/index_en.php Valcom
    FLAME DETECTION

    FLAME DETECTION

    Flame Detection Groveley Detection offers a complete range of flame detection products that precisely match your performance and cost requirements. Our flame detectors can be used in virtually any application where fire may result in a loss of capital equipment or where risk to personnel is high. We offer IR, IR3, UV/IR and visual flame detection (CCTV / IR) products for both industrial and commercial applications including oil and gas pipelines, turbine enclosures, offshore platforms, FPSOs, aircraft hangers. Our flame detectors can be supplied with a range of approvals including ATEX, UL and FM. >>>
    View the product on groveley.co.uk Groveley Detection Limited
    PIPELINE METAL DETECTION

    PIPELINE METAL DETECTION

    Pipeline Metal Detection - Meat & Other Pumped Products The Loma IQ² PipeLine Metal Detector Series have been designed to provide highly sensitive in-line metal detection for all types of pumped liquid and semi-liquid products including diced, ground and chopped meat, meat slurries, meat pastes, dairy products, sauces, jams and preserves, chocolate, soups and pickles. The Loma PipeLine metal detector series can be fitted into any existing pipeline system. The unit has robust quick release fittings that enable it to be easily dismantled and cleaned. A stainless steel bead blasted stand assembly with an integral gas strut for easy height adjustment is also available for the IQ2 PipeLine series. This ranges from 34" (864mm) to 41" (1000mm) and enables the unit to be easily handled - even by a single operator. Alternatively, base plate or "L" bracket units are available depending upon how and where the system is to be installed. Efficient, fast reject systems If any contaminants are found, they must be rejected quickly and efficiently. Loma has developed a range of reject valves to suit all types of product. An external tacho signal can be usually picked up from the pump that synchronises the reject system to ensure that the rejected portion is minimised for variations in pump speed. Automatic Product Learn Loma's Automatic Product Learn systems mean that the Loma IQ² PipeLine series can be calibrated even whilst in production. The system is automatically compensates for fluctuations in product temperature and clumping that can lead to false rejects. The Loma IQ² Linker PipeLine Metal Detectors Loma has worked closely with the world's leading manufacturers of vacuum fillers, clipping and linking systems to develop unique PipeLine systems that integrate into the filling and linking process. Loma IQ² PipeLine systems can be integrated with all of the systems listed below: Vacuum Fillers: Handtmann VF 12-24, VF 50-300 , VF 600 series Handtmann Piereder HVF 90 Vemag 1000 - 3000, Robbys, Robot HP & DP Risco 2000, 4001, 5000 Alpina DKF Karl Schnell 573 - 594, P7 - P11 Clippers: Poly-Clip FCA, DFC, DCE series Tipper/Tie KDC, DCA series Technopack DKF Alpina Consult Loma Linking Systems: Handtmann PH221, PVL,H240, PVLH241,PVLS141 Handtmann VF50 -300 Hand Linking Vemag HP series - 7C, 10C, 15C, 17C, 25E DP series - 10C, 15C, ROBBY-2 >>>
    View the product on loma.com Loma
    METAL DETECTION - PUMPED PRODUCTS

    METAL DETECTION - PUMPED PRODUCTS

    The Loma IQ² PipeLine Metal Detector Series have been designed to provide highly sensitive in-line metal detection for all types of pumped liquid and semi-liquid products including diced, ground and chopped meat, meat slurries, meat pastes, dairy products, sauces, jams and preserves, chocolate, soups and pickles.The Loma PipeLine metal detector series can be fitted into any existing pipeline system. The unit has robust quick release fittings that enable it to be easily dismantled and cleaned. >>>
    View the product on loma.com Loma Systems
    POINT SLUDGE BLANKET DETECTION AND CONTROL - MCS-2S

    POINT SLUDGE BLANKET DETECTION AND CONTROL - MCS-2S

    The MCS-2S combines suspended solids measurement and blanket detection in a single low cost monitoring unit. This unit is intended for continuous operation to monitor the sludge interface and produce the appropriate control signals. Typical applications can be found in various types of settlements tanks. Up to two SH2b/US100 probes can be interfaced with the unit to generate high and low blanket alarm signals. >>>
    View the product on mdinstruments.co.uk MD Instruments Ltd


    123Suivant >>Fin >
    Go to page


      Search    
     
     
     
    Search
    See all of the sector's products : Measuring devices, analysis and sensors