Cremation furnaces :
102 products
AQUATHERM FIRESTOP
Aquatherm Firestop offers the user an extensive range of pipes and fittings for the installation of fire sprinkler systems*.
The system is based on a fibre reinforced polypropylene pipe (faser
composite pipe) produced in a multi-layer extrusion process.
The material fusiolen® PP-R (80) FS used for the production of these pipes, is a plastic whose profile of properties is designed for the special demands of the field of application. Both the installer’s request for an easier processing and the demand for highest possible safety in later application was taken into account during its development.
Aquatherm Firestop is:
- weldable
There is no need for sealants or adhesives to create the joint.
- corrosion-proof
Prevents the clogging up of the sprinkler with corrosion products. This is ensuring a long, low-maintenance service life as well as trouble-free function of the system.
Pipes and fittings are certified under the registration no. 684a of LPCB according to guideline LPS 1260 for the use as pipe system for sprinkler installations.
The production of pipes and fittings is effected according to highest quality demands on most modern injection moulding machines and extrusion lines. The high quality of our products is also ensured by extensive controls of incoming goods and the production process.
The aquatherm quality management system is certified according to DIN EN ISO 9001:2000.
aquatherm Firestop - The advantages:
LPCB - certified and quality inspected
weldable There is no need for sealants or adhesives to create the joint.
corrosion-proof Prevents the clogging up of the sprinkler with corrosion products. This is ensuring a long, low-maintenance service life as well as trouble-free function of the system.
fibre reinforced Mechanically stabilized through a faser mix integrated in the middle layer of the PP-R (80).
And there are more advantages:
certified and quality inspected
weldable
Resistance against corrosion and chemicals. No accumulation of Products of corrosion
low pipe roughness Factor and high abrasion resistance
heat and soundinsulating characteristics
High Impact strength
joining by heated tool socket welding
Leakproof connection of pipe and fitting by fusion technique
Three-layer pipe structure with glass fibre reinforced layer
Not easily flammable acc. to din 4102-1, building Material class B1
General rules for the use of plastic pipes as sprinkler lines (according to LPCB)
In connection with the use of aquatherm Firestop, the following is to be observed. The “scope of use” of plastic pipe shall be agreed between the plastic suppliers, purchaser/installer, authority having jurisdiction, and/or insurer in accordance with document supplier “Installation Instructions” but subject to the following criteria taking precedence.
Use of plastic pipe and fittings is subject to water authority agreement for the territory concerned.
LPCB approved quick response sprinklers shall be used with exposed (i.e. fire exposure) plastic pipe and fittings.
Plastic pipe and fittings are suitable for use only with wet pipe systems.
Use of additives is only permitted in accordance with the manufacturers installation instructions.
Care should be exercised to ensure that joints are adequately cured, in accordance with the manufacturer’s installation instructions, prior to pressurisation.
Plastic pipe and fittings shall not be installed outdoors.
Not suitable for drinking water.
Where plastic pipe and fittings are exposed (i.e. fire exposure), the system shall be installed close to a flat ceiling construction.
Sprinkler systems which employ plastic pipe and fittings shall be designed where possible to ensure there are no ‘no flow’ sections of pipework in the event of sprinkler operation.
The system of pipes must be installed in accordance with the aquatherm installation instructions, which include the LPCB conditions of use agreed with aquatherm.
The maximum normal ambient temperature of use shall not exceed 70° C.
The products shall only be installed by LPCB certificated or registered installing companies (see Part 5, Section 1A and 1B above) or by firms outside the UK who can provide evidence of personnel training in the installation of the product. It is recommended that firms engaged in the installation of this product are also be certificated to ISO 9000.
Working parameter:
max. working temperatur : 70° C (158° F)
max. working pressure: 12.0 bar (174 PSI)
>>>
View the product on aquatherm-uk.com
Aquatherm Sales UK Ltd
COMBINATION OVEN 10 RACK ELEC
Uses One of the most versatile items of equipment - dry heat and steam combination can steam, poach, braise, reheat, roast, bake or blanch. Different foods can be cooked at the same time without
cross contamination of taste.
Capacity 10 x 1/1 gastronorm containers
Dimensions 955(w) x 855(d) x 2130(h) mm (on stand)
Power Electric model:
32 amp 3 phase
23.19 amps per phase, 16kW, via commando plug
Services Cold water inlet: 22mm (3/4" BSP)
Water pressure: minimum 1.5 bar
Waste outlet: 40mm (1 1/2") off tun dish
Waste height: 500mm
Use of a water filter is recommended
Features Four cooking modes - convection heat, steam, steam and convection, convection and humidification. Temperature range 50°C - 250°C.
Takes 1/1 gastronorm containers, 5 shelves supplied.
>>>
View the product on cksltd.co.uk/
Container Kitchen Systems Ltd
TRX SERIES TANK HEATERS
Lanemark TRX series packaged, high efficiency, small diameter immersion tube tank heating systems meet the needs of industrial process tanks which have heat input requirements of up to 45 kW
(150,000 Btu/h). Built to the same exacting standards as the larger capacity TX modular tank heating burner systems, the TRX burner incorporates burner, gas train and control system and is packaged to simplify/minimise plant installation work.
Specific advantages compared with alternative tank heating methods –
* Low operating costs – operating efficiencies of
>80% gross calorific value
>90% net calorific value
* TRX small diameter immersion tube heat exchangers occupy minimal tank space. This enables smaller tanks for new plant designs and allows the simple replacement of other heating systems for retrofit applications.TRX immersion tubes can be configured in almost any multi-pass shape to ensure that they remain well clear of any internal tank fittings or processing areas.
* All tank heat input and immersion tube performance calculations are easily carried out using Lanemark’s dedicated computer design software.
* Induced draught combustion air system allows multiple burner systems to be connected to a common flue while retaining individual burner control.
* Operates with low gas supply pressures.
* Firing into rubber lined or fibre glass tanks is permitted due to low initial heat exhanger surface temperatures at tank connection.
* Simple heat exchanger installation requires only two pipe flange drillings, usually in one tank wall.
* Fully compatible with Lanemark TX burner systems so that they may be incorporated into schemes where multiple TRX/TX burner arrangements are required.
>>>
View the product on lanemark.com
LANEMARK
