Selection of 120 products among
545
CONVEYOR DRUMS - POLYPROPYLENE
Polypropylene conveyor drums offer a Food quality alternative to stainless steel conveyor drums at a fraction of the cost Suitable for Drive, Tail, Snubbing and Idler applications Polypropylene is a
FDA approved material
Available in 50, 60, 88, 110, 125, 140, 165, 200, 225 and 250 mm diameter up to 1800mm face width.
Drums can be manufactured in any diameter up to 250 mm provided the face width does not exceed 750 mm. In this instance the roller would be constructed in Solid polypropylene and machined to the required diameter
Optional extras include:-
Integral bearings and additional double lipped oilseals (R23)
Stainless steel bearing and circlips
Tracking or polcord grooves. Parallel or crowned face. Multiple crowns.
Shaft machining. i.e. Keyway, flats, hole centres etc.
Food quality rubber covering or non-slip lagging
Polypropylene shell can alternatively be Polyethylene (500 or 1000 grade), acetal or various Nylons.
Solid tapered rollers for belt or gravity bend
>>>
View the product on arnott-group.co.uk
Arnott Conveyors Limited
PARTS CONVEYOR EQUIPMENT
AViTEQ parts conveyors for ordered arranging, individualizing and conveying are used in every case where mass parts have to be supplied to a magazine, a machine or to installation equipment, item
for item, with a pre-determined orientation and time. AViTEQ has been the pioneer in Europe for more than 50 years in producing parts conveyor drives and devices.
Advantages of AViTEQ parts conveyors:
High level of conveying capacity with compact dimensions
Operationally safe in continuous employment
Synchronized two-mass vibration system
No influencing of the vibration characteristics through the weight of the parts being conveyed
Maintenance-free drive
Conformity with all EC Guideline which affect the drives
Also available for explosion-endangered spaces (Ex), as well as for 60 Hz power systems and other mains voltages
Construction and operating mode
Parts conveyors are two-mass vibration systems, which are synchronized to be close to resonant condition. The drive part includes the elements for vibration generation, such as electromagnet and leaf spring packages. The arrangement of the simple leaf springs determines the feed direction. Parts conveyors, which convey in clockwise direction, are designated with "R" (clockwise running). Parts conveyors which convey in anti-clockwise direction are designated with "L" (anti-clockwise running). In the case of an order, it is absolutely necessary that the feed direction be indicated. The pot is connected with the drive and is easily detachable. For individual itemization and alignment of parts, special mounted equipment (baffle plates) in the pot is necessary. Optimal design and coordination of the two-mass vibration system guarantee a uniform conveying action, which is also independent of the pot filling. The parts conveyor is supported on rubber dampers. Vibrations are thus transmitted only weakly to the environment.
Pot and drive selection
The normal shape of the pots is cylindrical, in certain cases also cone or step-shaped. Such a pot is selected if parts tend to become jammed between spiral paths located over one another. The selection of the pot diameter depends of the size of the parts to be conveyed. As a rule, it can be assumed that the largest dimension of the part should not exceed approx. 1/6 of the pot base diameter. With this, the drive is also virtually determined. The replacement of pots with similar diameter, however, with different weight is easily possible. For this, corrections are to be carried out on the compensation weights according to operating instructions. Stainless steel (1.4301; 1.4404) is employed as a material for the parts conveyor pots. Pots with 100 mm diameter are additionally produced from polyamide or aluminum. According to requirement, the pots can be provided with different linings, such as e.g. polyurethane, conveying brush material or Teflon.
>>>
View the product on aviteq.de
Aviteq
CONVEYOR BELTS
Our FLAT CONVEYOR BELTS are designed to guarantee the ideal transport of loose products without breakage, contamination or leakage.
The belts are constructed in white plastic suited for
food-processing use and feature container walls with thermoplastic sealing to the belt surface.
The FLAT BELT structure can be in AISI 304 stainless steel, painted carbon steel, or aluminium, as required by client needs.
The FLAT BELTS can be supplied in varied shapes and sizes for the best performance.
The most common sectors of application are: FOOD-PROCESSING, AGRICULTURE, DAIRY, CHEMICAL, PHARMACEUTICAL, MINING, CERAMICS.
>>>
View the product on cidiesse.com
CIDIESSE ENGINEERING
CONVEYOR PULLWIRE SYSTEM - H800 PULLKEYS
Pullwire operated safety switches
3 Year Warranty
Sealed to IP 65
Corrosion resistant components
Tough UV Stabilised lightweight polycarbonate enclosure
Designed for operation in arduous
environments
Intrinsically safe versions
ATEX certified versions Group11 Category 1D for use in explosive dusts
Double ended mechanism
Snap action operation of internal switches as standard
Slack or taut wire operation
Cats eye indicator with option of semaphore flag or padlock facility
The Davis Derby StedFAST conveyor pullwire operated safety switch is used all around the world in a variety of industries including coal mining, quarrying, ports and cement plants.
There is a version approved for use in areas where there is a hazard from explosive dusts such as coal dust, fertilisers, flour, grain and other explosive dusts.
The body is moulded from a high stability UV protected polycarbonate which is tough and light in weight. The incoming and outgoing cables are connected via cable glands or plugs and sockets to a 12 way easy access terminal block.
The operating knob is sealed with an O ring and the lid is fitted with a fully recoverable closed cell silicon gasket.
The StedFAST pull key has a snap action mechanism to meet the requirements of PD 5304:2000 and BSEN 620:2002 “Standards for trough conveyors”.
>>>
View the product on davisderby.co.uk
Davis Derby Ltd
LOW PROFILE FLEXIBLE SCREW CONVEYOR
Motor drive positioned at the conveyor inlet allows the discharge end to fit within limited headroom areas
Flexicon's Low Profile Flexible Screw Conveyor positions the motor drive at the inlet end
of the conveyor tube, allowing the discharge end to fit within limited headroom areas typically encountered above weigh hoppers or other receiving vessels.
The enclosed, dust-free conveyor can move material vertically, horizontally or at any angle, through small holes in walls or ceilings, and can handle products ranging from sub-micron powders to large pellets, including those that pack, cake, plug, seize, smear or fluidize, with no separation of blended products.
The only moving part contacting material is a flexible inner screw, maximizing reliability while reducing maintenance. The removable screw and tube interior are smooth and crevice-free, allowing rapid, thorough cleaning.
Low Profile Flexible Screw Conveyors are offered in diameters from 2-5/8 to 8 in. (64 to 203 mm) in stationary and mobile configurations to industrial, food, dairy and pharmaceutical standards, with optional hoppers, flow promotion devices, sensors, controllers and interchangeable screw designs to satisfy wide-ranging material and process requirements.
>>>
View the product on flexicon.com
Flexicon Europe Ltd
ISOMA AIR CONVEYOR SYSTEM
The Isoma Air Conveyor System (patent pending) for handling PET bottles incorporates a unique circular profile for the air ducting. Not only does this make the Isoma air conveyor aesthetically
pleasing but it also offers improved structural rigidity compared to some of the the more conventional bolted sheet structures.
The innovative design by Isoma makes installation of their air conveyor much easier than most other air conveyor systems and offers an inherently stronger and more advanced solution for conveying PET bottles. The design of the Isoma Air Conveyor System allows for increased control of the line flow speed by using smaller sectioned lengths of air conveyor and by using energy efficient, inverter controlled fans at regular intervals along the line.
The fan speeds are controlled and modulated as required, reducing line pressure and improving bottle flow in accordance with the downstream equipment and conveyor fill levels. The ability to modulate the line speed at frequent intervals along the system reduces the likelihood of damage being caused to the bottles and this significantly helps to improve the efficiency of the line. Incorporated into the Isoma Air Conveyor System are adjustable guide rails which are available with either manual or fully automatic adjustment for lines which run multiple bottle sizes.
Manufactured in 304 stainless steel, the Isoma Air Conveyor offers a low maintenance and very attractive solution for the conveying of PET bottles. For further information or to arrange a visit to our Swadlincote factory to see a working demonstration of the Isoma Air Conveyor System please don't hesitate to contact us.
>>>
View the product on isomaconveyors.co.uk
Isoma Conveyors Limited
HEAVY-DUTY ROLLER CONVEYOR
Webb has a long tradition of success in the heavy-duty roller conveyor industry.
Our conveyors are at the heart of thousands of manufacturing, warehousing, and distribution operations - providing
unmatched reliability in the most demanding environments. Webb’s conveyors are designed with function in mind. They are used for point-to-point movement of pallets and containers, labeling, assembly and inspection stations.
The exclusive, modular design makes our systems easy to install, modify, expand, or relocate.
Nine basic roller widths, load capacities ranging from 500 to 5,000 lbs. (227 to 2,268 kg), and travel speeds of 30 to 75 feet/minute (.15 to .38 meters/second) make Webb heavy-duty roller conveyors suitable for a wide range of applications.
>>>
View the product on jervisbwebb.com
Jervis B. Webb
