Selection of 40 products among
55
1 KW HF DSP TRANSCEIVER - TMR 5219
The TMR5200 range of HF
transceivers is part of Thales
CommunicationsÂ’ Series 5000
integrated HF equipment.
The Series 5000 is an inhouse
integrated solution for
transmitters,
receivers,
transceivers, multicouplers,
audio routing and control
systems. The range features a
common low-level module
architecture and a common
control protocol, which together
with DSP technology and a wide
range of control options provides
a flexible and configurable
solution for long, medium and
short range communications.
The compact and robust design
supports easy integration into
fixed, sheltered or transportable
stations. Associated radio
gateway, adaptive
communication controllers and
high speed modems define the
cost effective Series 5000 as a
state of the art HF
communications system.
The TMR 5200 1 kW HF
transceiver shares a common
module architecture and
software protocol with the Series
5000 HF equipment range. This
flexibility of design enables
complex HF systems, with
facilities for voice, fax and data
file transfer, to be configured and
controlled. Narrow band filtering
and baseband signal processing
are implemented using flexible
and programmable digital signal
processing (DSP) techniques.
TMR 5200 transceivers are
designed for output at full rated
power in continuous duty
applications.
ICAO Annex 10 SELCAL is built -
in, using DSP tone generation.
General
Stored Channels
1000 user-programmable preset
channels
Frequency Stability
0.33 ppm from 0OC to +35OC
2 ppm from 0OC to +50OC typical
Optional OCXO 0.01 ppm from 0OC to
+50OC
External Frequency Standard Input
1, 5 or 10 MHz
Modes of Operation
CW A1A, A1B
MCW A2A, A2B
FAX F1C, F3C
FSK F1B, F2B
USB/LSB H2A, H2B, H3E, J2A,
J2B, J3E
R2A, R2B, R3E
ISB B7E, B8E, B9W
Tuning
Direct frequency or channel entry
from keyboard or keypad
Synthesizer Tune Time
< 20 ms to within 20 Hz
Remote Control Interfaces
RS-232 or RS-485
Line Input/Output
Two independent channels, -20 dBm
to +10 dBm, 600 Ohms balanced
audio
BITE
To module level at user command
Control Options
Local, Remote, Computer
Receiver
Frequency Range
10 kHz to 29.999999 MHz in 1 Hz
steps
BFO: +- 7.99 kHz in 10 Hz steps
Sensitivity
SSB -113 dBm for 10 dB SINAD
CW -123 dBm for 10 dB SINAD
AM (30%) -99.5 dBm for 10 dB
SINAD
Reciprocal Mixing
Better than –127 dBc/Hz at
20 kHz offset
Image/IF Rejection
80 dB minimum (100dB with optional
pre-selector)
Spurious Rejection
80 dB minimum (100dB with optional
pre-selector)
Internally Generated Spurious
< -121 dBm equivalent input for
99.5% of channels
Out of Band Intermodulation
Products
< -80 dBc with 2 tones each at
-20 dBm
In-band Intermodulation Products
< -50dBc with 2 tones each at
-6dBm
AGC
Adjustable threshold, output level
within 3 dB
For inputs greater than threshold up
to +13 dBm
Voice
Attack < 20 ms. Decay selectable
slow, medium or fast
Data
Attack < 10 ms. Decay < 25 ms
RF Input Protection
100 V emf
Transmitter
Frequency Range
1.5 MHz to 29.999999 MHz in
1 Hz steps
Output Power
1kW ± 1 dB PEP or average into
50 Ohm nominal (VSWR 2 MHz
Harmonics
< -73 dBc
Carrier Suppression
> 60 dB
Unwanted Sideband Suppression
> 60 dB
Noise
< -50 dBc in the band 300 Hz to
3 kHz from carrier
< -130 dBc for frequencies > 5%
from carrier for carrier frequencies >
2 MHz
Environmental
Temperature Range
-5OC to +55OC Operating
-40OC to +70OC Storage
Size (h x w x d)
1220 x 600 x 800 mm
Weight
153 kg
Power Supply
AC 200 - 270 V, 47-63 Hz
Transceiver Options
Pre/post selector (PPS)
High stability reference oscillator
Remote control RCU 6000
SELCAL keypad
>>>
View the product on thales-communications.ltd.uk/signature_management.htm
THALES JOINT SYSTEMS
RECEIVER 2.5 GB/S, MSA, 2R, PIN/APD
The JDSU 54RM 2R series receiver module is designed for use in telecommunications systems and high speed data communications applications. This flexible device incorporates Frequency Shift Keying
(FSK) tone detection. When used with the companion FSK transmitter, the 54RM provides control and status of a network with no additional fiber required. Its uniform package, pin function, and common optical and electrical characteristics are Multisource Agreement (MSA) compliant.
The 54RM 2R receiver module design uses an Indium Gallium Arsenide (InGaAs) Avalanche photodiode (APD) detector. It does not include a Clock/Data Recovery (CDR) function, thus allowing additional system design flexibility. It contains an integrated APD high voltage supply that is temperature-compensated at our factory for optimum sensitivity.
The 54RM 2R receiver module operates at continuous rates from 45 Mb/s to 2.7 Gb/s without gap and provides options for current mode logic (CML) or LVPECL outputs. The 54RM receiver also features an optical input level voltage (OILV) monitor with ±1dB accuracy and decision threshold voltage (DTV) adjustment.
Key Features
MSA compliant
Frequency Shift Keying (FSK) tone detection option allows control and status monitoring of the network
1310 nm or 1550 nm operation
Data rates from 45 Mb/s to 2.7 Gb/s (no CDR)
APD for better than -30 dBm sensitivity
-40 °C to 85 °C operation
Decision threshold voltage adjustment provided for use in amplified system
Applications
High speed, long haul fiberoptic links for voice, data, and digital video
Metropolitan area networks
Wide area networks
Compliance
Telcordia GR-253-CORE
ITU-T G.958
>>>
View the product on jdsu.com/
Jds Uniphase
TMR 5100/5110 HF DSP RECEIVERS
The TMR 5100 range of high
performance LF/MF/HF
receivers is part of the Thales
CommunicationsÂ’ Series 5000
integrated HF equipment range
The Series 5000 is an in-house
integrated solution for
transmitters,
receivers, transceivers,
multicouplers, audio routing and
control systems.
It features a common low-level
module architecture and a common
control protocol, which
together with DSP technology
and a wide range of control
options provides a flexible and
configurable solution for all long,
medium and short range communications.
All receivers in the range are
fully programmable and incorporate
a wide range of operational
features, including digital tuning,
1000 memory channels, optimised
DSP filtering, AGC and
demodulation, syllabic squelch
and BITE.
The receivers share common
module architecture and
software protocol within the
Series 5000 HF equipment
range. This flexibility of design
enables complex HF systems,
with facilities for voice, fax and
data file transfer, to be
configured and controlled.
The receiver features high
linearity RF design for use in
areas of high spectral
congestion.
IF filtering, AGC and
demodulation are implemented
using digital signal processing
techniques. Receivers are
available in single and dual
versions in one 4U chassis, and
are the ideal choice for racked
multiple receiver installations
using local, remote or system
control.
Ordering Information
5100S Single RX, remote
5100D Dual Rx, remote
5110S Single Rx, local/remote
5110D Dual Rx, local/remote
General
Stored Channels
1000 user-programmable
preset channels
Frequency Stability
0.33 ppm from 0OC to
+35OC
2 ppm from 0OC to +50OC
typical
Optional OCXO 0.01 ppm
from 0OC to +50OC
External Frequency Standard
Input
1, 5 or 10 MHz
Modes of Operation
CW A1A, A1B
MCW A2A, A2B
FAX F1C, F3C
FSK F1B, F2B
USB/LSB H2A, H2B, H3E,
J2A, J2B, J3E
R2A, R2B, R3E
ISB B7E, B8E, B9W
Tuning
Direct frequency or channel
entry from keyboard or
keypad
Synthesizer Tune Time
< 20 ms to within 20 Hz
Remote Control Interfaces
RS-232 or RS-485
Line Output
Two independent channels,
-20 dBm to +10 dBm, 600
Ohms balanced audio
BITE
To module level at user command
Control Options
Local, Remote, Computer
Receiver
Frequency Range
10 kHz to 29.999999 MHz
in 1 Hz steps
BFO: +- 7.99 kHz in 10 Hz
steps
Sensitivity
SSB -113 dBm for 10 dB
SINAD
CW -123 dBm for 10 dB
SINAD
AM (30%) -99.5 dBm for
10 dB SINAD
Reciprocal Mixing
Better than –127dBc/Hz at
20 kHz offset
Image/IF Rejection
80 dB minimum (100dB
with optional pre-selector)
Spurious Rejection
80 dB minimum (100 dB
with optional pre-selector)
Internally Generated Spurious
< -121 dBm equivalent input
for 99.5% of channels
Out of Band Intermodulation
Products
< -80 dBc with 2 tones each
at -20 dBm
In-band Intermodulation
Products
< -50dBc with 2 tones each
at -6 dBm
AGC
Adjustable threshold, output
level within 3 dB
For inputs greater than
threshold up to +13 dBm
Voice
Attack < 20 ms. Decay
selectable slow, medium or
fast
Data
Attack < 10 ms. Decay < 25
ms
RF Input Protection
100 V emf
Envronmental
Temperature Range
-5OC to +55OC Operating
-40IOC to +70OC Storage
Size (h x w x d)
178 x 483 x 460mm
Weight
< 19 kg (configuration
dependent)
Power Supply
AC 85-132 or 170-264 V,
47-63 Hz
Options
Pre-selector
High stability reference
oscillator
>>>
View the product on thales-communications.ltd.uk/signature_management.htm
THALES JOINT SYSTEMS
TRANSCEIVER 155 MB/S OC-3, SFF
The JDSU CF2 Series OC-3 transceiver is a duplex-LC transceiver designed for use in SONET OC-3 and SDH STM-1 applications. It operates with a single 3.3 V power supply. The unit conforms to the
industry-standard 2x5 and 2x10 footprints and meets the mezzanine height requirement of 9.8 mm.
Each transceiver consists of an optical subassembly housing both the transmitter and the receiver, and an electrical subassembly. All are packaged together with a top metal cover and bottom shield.
The optical subassembly comprises two parts: the transmitter side has a high performance 1300 nm Fabry-Perot (FP) or 1550 nm distributed feedback (DFB) laser and back facet monitor. The receiver side has an InGaAs PIN and a preamplifier.
All CF2 Series OC-3 transceivers also include a signal detect circuit, which provides either a Positive Emitter Coupled Logic (PECL) or TTL logic high output when a usable input optical signal level is detected.
Key Features
Temperature ranges: 0 to 70 °C, -20 to 85 °C, and -40 to 85 °C
Single 3.3 V power supply
LV-PECL data input and receiver output levels
TTL or PECL signal detect
Multisource Agreement (MSA)-conforming 2x5 and 2x10
SFF package
Electromagnetic interference (EMI) meets FCC Class B limit
Class 1 Laser Safety conformance
Meets mezzanine height standard of 9.8 mm
Wave-solderable/aqueous-washable
Industry-standard duplex-LC optical connector
Operates with 9/125 µm single-mode optical fibers
Available in IR1 (15 km)
Applications
Metro
Access
Wide area networks
Compliance
Compliant with SONET OC-3 and ITU-T G.957 SDH STM-1 specifications (155 Mb/s data rate)
>>>
View the product on jdsu.com/
Jds Uniphase
DENON AVR2308 AV RECEIVER
The Latest Audio and Video Support
Deep Color 30/36 bits color depth and xvYCC broader color space support.
HDMI1.3a inputs/outputs allow to handle audio and video signal with higher
speed.
State-of-the-art Denon Solutions for Maximising Content Quality
Identical quality and power for all 7 channels, 100W x 7ch.
New 32 bit floating point DSP.
Compressed Audio Restorer.
Denon's new audio technology for MP3/WMA/AAC compressed format to reproduce higher frequency range and deeper bass sound.
This new audio technology provides better sound for iPod.
Latest version Mult EQ.
New tower type microphone for more accurate measuring.
Maximum six points measurement.
New filtering ALFC (Adaptive Low Frequency Correction)for higher resolution processing in low frequency band.
HD Video Circuit.
Discrete and latest devices for ultimate HD video performance in each block.
Faroudja DCDi Processing up to 1080p.
Analog to HDMI up conversion.
New Chassis Construction for clear audio and video signal.
Minimum signal path.
Direct Mechanical Ground for stable drive.
Separate unit design.
Digital Media Connectivity
iPod® audio, photo and video playback (optional ASD product family).
Ease-of-Use
Auto set-up and Room EQ, featuring MultEQ from Audyssey.
New back panel layout.
Multi Zone Capability
Two Zone multi source capability.
Remote in/out.
RS-232C control.
>>>
View the product on ssav.com
Sevenoaks CI Centre - Yeovil
TMR6100 HF DIGITAL RECEIVER
Receiver
Sensitivity: LSB, USB, ISB: A signal of - 113 dBm
(1 µ emf) in a 3kHz bandwith gives an (S+N)/N of
10 dB for the frequency range 0.1-30 MHz. The
corresponding noise figure is 16 dB. High
sensitivity
position also available
AGC: < 3 dB change in output for input signals
between –103dBm and +13dBm
Attack time 10 ms
Decay time fast, medium, slow-compatible
with all modes
Fully compliant with L11
IF filter: The equipment has digital filters with the
following bandwidths (symmetrical or nonsymmetrical)
0.3 kHz, 1.1 kHz, 2.3kHz, 2.4kHz,
2.75kHz, 3.1, kHz, 5kHz, 6 kHz
BFO/RIT:
BFO Tunable ± 8kHz in 10 Hz steps
RIT Tunable ± 3kHz in 1 Hz steps
In-band intermodulation products:
In SSB and in ISB modes, for two 141 mV emf
carriers, resulting in audio outputs at 1100 Hz and
1700 Hz, all intermodulation products and
harmonics are 50dB or more below each tone
Out of band intermodulation products:
Between 1.5 MHz and 30 MHz for two equal
signals removed from the tuned frequency by 5 and
10%, the 3rd order intercept point is +55 dBm
Cross modulation: A 30% modulated unwanted
signal A3 (400) removed by at least 20 kHz from a
wanted signal of 1.0 mV emf can have a level up to
700 mV emf before 3 % cross modulation occurs
Blocking: A -53 dBm wanted signal is not
compressed by more than 1 dB by an interfering
carrier of +6 dBm removed by not less than 20
kHz from the tune frequency
IF rejection: The rejection of all IF frequencies is
100 dB or more below the wanted signal
(1.5 to 30 MHz)
Image rejection: The rejection of both the first
and second image frequency is >100 dB below
the wanted signal
Spurious rejection: At frequencies more than 20
kHz from the tuned frequency, the spurious signal
rejection is at least 80 dB. >105 dB at frequencies
>5% from the tuned frequency
Internally generated spurious: Fewer than
50, 3kHz channels have spurious levels above
-121 dBm referred to the input in the range
100 kHz to 30 MHz. No channels have spurious
responses above -112 dBm
Mute and desense: Typically 126 dB minimum
110 dB of desense is available in less than 2 ms.
Resensitisation occurs typically in less than 4 ms
Scan mode: Channel scan between designated
channels with selected dwell time on each channel
(0.1 to 9.99 s). Scanning may be stopped on
detection of a signal above a programmable
threshold. The receiver has a tape recorder activate
line when a signal is detected
Metering: RF level indication available
Interfaces
(Interfaces with * are duplicated in a dual receiver)
Antenna input*: Input impedance 50 Ohms nominal
No damage is caused by input signals up to 100 V emf
from a 50 Ohms source at any frequency between
60 kHz and 30 MHz with the power supply connected
or disconnected
Antenna radiation: The level of any discrete
frequency component radiated in the range
0 - 100 MHz measured in 50 Ohms does not
exceed -87 dBm
IF output*: 452.5 kHz IF output with 10 kHz bandwith
AF outputs*: One line output for each sideband
level adjustable -20 dBm to +10 dBm into 600
Ohms balancedUser facility to switch the two lines
Sidetone inputs*: One line input for each sideband
Level adjustable -20 dBm to +10dBm into
600 Ohms balanced
Tape recorder interface*: Closing contact when
signal exceeds programmed threshold
Remote control*: One single RS-485 addressable
bus (up to 99 equipments)
Data rate selectable from 600 to 19200 bits/s
Asynchronous interface
RS-232 serial point to point control interface
also available
Power supply: 85 to 132 V and 170 to 264
VAC, 47 - 63 Hz auto-ranging
Miscellaneous
Temperature range: MIL-STD- 810E.
Methods 500-3, 501-3, 502.3
Operating: -5°C to +50°C
Storage: -30°C to +70°C
Humidity: MIL-STD- 810E. Method 507-3
88% at 40°C
Vibration: MIL-STD- 810E cat 9 Random vibration
Shock: MIL-STD 901D. 30g, 25mS
MTBF: MIL-HDBK-217F at 25°C NS
>3,800 hrs to 7,600 hrs dependent on configuration
Size: 178 H (4U) x 483 W x 460 D mm
Weight: 13 kg-19 kg (depending on the configuration)
Options: Single or Dual receivers in 4U chassis
Operator/Passive Front Panel
High Stability Frequency Standard
Multicoupler MCU 6403/6402 Specifications
Configuration:
MCU6403 4 antenna inputs with 3 outputs
for each input
MCU6402 4 antenna inputs with 2 outputs
for each input
Frequency range: 10 kHz to 30 MHz
Noise figure: =9.5dB with 50 ohms source
and termination over the frequency range 60 kHz to
30 MHz
Intermodulation products:
Between 1.6 MHz and 30 MHz for two equal
signals, the 3rd order intercept is + 50 dBm
BITE: Automatic detection to module level
Remote control: No functions to control: only
status information provided. BITE/status reported
to MCU 6412 for onward transmission to a
remote system
Power supply: 115V / 23OVAC ± 10%
50-60Hz ± 10%
Temperature range: MIL-STD- 810E. Methods
500-3, 501-3, 502.3
Operating: -5ºC to +55ºC
Storage: -30ºC to +70ºC
Environmental: MIL-STD-810 E, NES 1004 and
MIL-STD-461D Standards as per receiver
Size: 133 H (4U)x 483 W X 470 D mm
Weight: 10kg
Front panel: Passive front panel with power ON/OFF
indication. LED status indication for each output
Multicoupler MCU 6412 specifications
Configuration:
MCU6412 4 inputs to 12 outputs
(any receiver output can be
connected to any antenna input)
Frequency range: 10 kHz to 30 MHz
Noise figure: =16 dB with SO ohms source and
terminations over the frequency range 60 kHz
to 30 MHz
Intermodulation products: Between 1.6 MHz and
30 MHz for two equals signals, the 3rd order
intercept point is +50 dBm
BITE: Automatic detection to module level
Switching time:
>>>
View the product on thales-communications.ltd.uk/signature_management.htm
THALES JOINT SYSTEMS
