Commutateurs (translation in progress) - Hellopro
Search   


See all sector categories "Electricity/Electronics"

View associated products
Switches
Commutateurs (translation in progress)
Commutateur à clé (translation in progress)
Boutons poussoirs (translation in progress)
Interrupteurs (translation in progress)
Variateurs électriques (translation in progress)
Téléruption (translation in progress)


Commutateurs (translation in progress) :

10 products Flux RSS
ETS3000 INDUSTRIAL TEMPERATURE SWITCH

ETS3000 INDUSTRIAL TEMPERATURE SWITCH

Black anodised aluminium case to IP66 Digital Indication Dual reply output Adjustable switching differential Optional 4 - 20 mA output Integral battery or 24V.dc supply Temperature settings from -50 to +400°C This range incorporates a RTD sensor for temperature settings between -50 and +400°C. The wetted parts are 316 stainless steel with a rigid stem or capillary option. Dual independently adjustable SPCO relays and digital display are housed in a black anodised aluminium housing sealed to IP66 standards. Pushbuttons are provided for setting, deadband and latching adjustment. >>>
View the product on pyropress.com Pyropress Engineering Co. Ltd, The
L1100 INTRINSICALLY SAFE HORIZONTAL LEVEL SWITCH

L1100 INTRINSICALLY SAFE HORIZONTAL LEVEL SWITCH

ANC4B 316 stainless steel or black anodised aluminium case Single or dual level alarm points IP66/IP67 Certified housing for marine environments Certification ATEX CE Ex II1G EExia IIC T6 Tamb -50 to +78°C, T5 Tamb -50 to +93°C, T4 Tamb -50 to +128°C Switching is achieved by means of an eccentric cam which translates the vertical movement of the float assembly to a horizontal plunger to operate a SPCO/SPDT microswitch. The wetted parts are manufactured from 316 stainless steel, with the horizontal plunger ‘O’ Ring seal manufactured from nitrile. The SPCO/SPDT microswitches are housed in a 316 ANC4B stainless steel or black anodised aluminium housing sealed to IP66 standards. Designed to give indication of high or low level alarm, second microswitch can be fitted to supply an additional signal. >>>
View the product on pyropress.com Pyropress Engineering Co. Ltd, The
L120 INTRISICALLY SAFE REED LEVEL SWITCH

L120 INTRISICALLY SAFE REED LEVEL SWITCH

ANC4B 316 stainless steel or black anodised aluminium case Single or dual level alarm points IP66/IP67 Certified housing for marine environments Certification ATEX CE Ex II1G EExia IIC T6 Ta -50 to +78°C, T5 Ta -50 to +93°C, T4 Ta -50 to +128°C This range of magnet operated reed switches are equipped with hermetically sealed reed contacts. The floats are fitted with an annular magnet which moves freely between two collars to open or close the reed contacts. Screwed or flange connections can be provided for level settings from 50mm to 2000mm, versions upto 5 metres can be specially made >>>
View the product on pyropress.com Pyropress Engineering Co. Ltd, The
L1200 INTRINSICALLY SAFE VERTICAL LEVEL SWITCH

L1200 INTRINSICALLY SAFE VERTICAL LEVEL SWITCH

ANC4B 316 stainless steel or black anodised aluminium case Single or dual level alarm points IP66/IP67 Certified housing for marine environments Certification ATEX CE Ex II1G EExia IIC T6 Ta -50 to +78°C, T5 Ta -50 to +93°C, T4 Ta -50 to +128°C This design is suitable for mounting through a tank top or cover and utilises a float that is allowed to travel unrestricted up or down the rod in response to level change between the limits set by the upper and lower adjustable rod collars which are fixed in position at pre-selected points. Available as high or low level alarm or pump control via a latching mechanism or designed to give indication of high or low level alarm, second microswitch can be fitted to supply an additional signal. The SPCO/SPDT microswitches are housed in a 316 ANC4B stainless steel or black anodised aluminium housing sealed to IP66 standards. >>>
View the product on pyropress.com Pyropress Engineering Co. Ltd, The
LF34 FLAMEPROOF HORIZONTAL LEVEL SWITCH

LF34 FLAMEPROOF HORIZONTAL LEVEL SWITCH

ANC4B 316 St steel or black anodised aluminium case 316 stainless steel wetted parts M20 Electrical connectionCertification ATEX CE II2GD EExd IIB + H2 T6 = Ta -55 to +60°C, T6 = -55 to +75°C, T4 -55 to +90°C Switching is achieved by means of an eccentric cam which translates the vertical movement of the float assembly to a horizontal plunger to operate a SPCO/SPDT microswitch. The wetted parts are manufactured from 316 stainless steel, with the horizontal plunger O Ring seal manufactured from nitrile. The SPCO/SPDT microswitches are housed in a 316 ANC4B stainless steel or black anodised aluminium housing sealed to IP66 standards. Designed to give indication of high or low level alarm, second microswitch can be fitted to supply an additional signal. >>>
View the product on pyropress.com Pyropress Engineering Co. Ltd, The
LF35 FLAMEPROOF VERTICAL LEVEL SWITCH

LF35 FLAMEPROOF VERTICAL LEVEL SWITCH

ANC4B 316 St steel or black anodised aluminium case 316 stainless steel wetted parts M20 Electrical connection Certification ATEX CE II2GD EExd IIB + H2T6 = Ta -55 to +60°C, T6 = -55 to +75°C, T4 -55 to +90°C This design is suitable for mounting through a tank top or cover and utilises a float that is allowed to travel unrestricted up or down the rod in response to level change between the limits set by the upper and lower adjustable rod collars which are fixed in position at pre-selected points. Available as high or low level alarm or pump control via a latching mechanism or designed to give indication of high or low level alarm, second microswitch can be fitted to supply an additional signal. The SPCO/SPDT microswitches are housed in a 316 ANC4B stainless steel or black anodised aluminium housing sealed to IP66 standards. >>>
View the product on pyropress.com Pyropress Engineering Co. Ltd, The
LF510 FLAMEPROOF HORIZONTAL LEVEL SWITCH

LF510 FLAMEPROOF HORIZONTAL LEVEL SWITCH

Certification ATEX CE II2GD EExd IIC T6 = Ta -50 to +71°C, T5 = -50 to +86°C, T4 -50 to +96°C ANC4B 316 stainless steel or PPS polymer case to IP67 316 stainless steel wetted parts Flying lead with M20 or 1/2" NPT Male connection, specified length of cable or junction box options Switching is achieved by means of an eccentric cam which translates the vertical movement of the float assembly to a horizontal plunger to operate a SPCO/SPDT microswitch. The wetted parts are manufactured from 316 stainless steel, with the horizontal plunger O Ring seal manufactured from nitrile. The SPCO/SPDT microswitches are housed in a 316 ANC4B stainless steel or black anodised aluminium housing sealed to IP66 standards. Designed to give indication of high or low level alarm, second microswitch can be fitted to supply an additional signal. >>>
View the product on pyropress.com Pyropress Engineering Co. Ltd, The
LF520 FLAMEPROOF VERTICAL LEVEL SWITCH

LF520 FLAMEPROOF VERTICAL LEVEL SWITCH

Certification ATEX CE II2GD EExd IIC T6 = Ta -50 to +71°C, T5 = -50 to +86°C, T4 -50 to +96°C ANC4B 316 stainless steel or PPS polymer case to IP67 316 stainless steel wetted parts Flying lead with M20 or 1/2" NPT Male connection, specified length of cable or junction box options This design is suitable for mounting through a tank top or cover and utilises a float that is allowed to travel unrestricted up or down the rod in response to level change between the limits set by the upper and lower adjustable rod collars which are fixed in position at pre-selected points. Available as high or low level alarm or pump control via a latching mechanism or designed to give indication of high or low level alarm, second microswitch can be fitted to supply an additional signal. The SPCO/SPDT microswitches are housed in a 316 ANC4B stainless steel or black anodised aluminium housing sealed to IP66 standards >>>
View the product on pyropress.com Pyropress Engineering Co. Ltd, The
LI510 INTRINSICALLY SAFE HORIZONTAL LEVEL SWITCH

LI510 INTRINSICALLY SAFE HORIZONTAL LEVEL SWITCH

Certification ATEX CE Ex II1G EExia IIC T6 Ta -50 to +78°C, T5 Ta -50 to +93°C, T4 Ta -50 to +128°C ANC4B 316 stainless steel or PPS polymer case to IP67 316 stainless steel wetted parts M20 female or DIN 43650 Plug and socket electrical connection with flying lead and junction box options This design is suitable for mounting through a tank top or cover and utilises a float that is allowed to travel unrestricted up or down the rod in response to level change between the limits set by the upper and lower adjustable rod collars which are fixed in position at pre-selected points. Available as high or low level alarm or pump control via a latching mechanism or designed to give indication of high or low level alarm, second microswitch can be fitted to supply an additional signal. >>>
View the product on pyropress.com Pyropress Engineering Co. Ltd, The
VF560 FLAMEPROOF VACUUM SWITCH

VF560 FLAMEPROOF VACUUM SWITCH

ANC4B 316 stainless steel or PPS polymer case to IP67 Calibrated adjustment scale Vacuum settings between 0.25 mBar and 995 mBar Flying lead with M20 or 1/2" NPT Male connection, specified length of cable or junction box options GOST R Certified option Certification ATEX CE II2GD EExd IIC T6 = Ta -50 to +71°C, T5 = -50 to +86°C, T4 -50 to +96°C This range incorporates diaphragm actuation for vacuum between 0.25 mBar and 995 mBar. The wetted parts are manufactured from 316 stainless steel. Single or dual adjustable SPCO/SPDT microswitches are housed in a robust housing sealed to IP66 standards. >>>
View the product on pyropress.com Pyropress Engineering Co. Ltd, The


  Search    
 
 
 
Search
See all of the sector's products : Electricity/Electronics