Clean room furniture - All suppliers - furniture of white rooms - sterile furniture - sterile environment - furnish white room - white room banks on - chair white room - white room assemble
Search   


See all sector categories "Laboratories"

View associated products


Clean room furniture :

14 products Flux RSS
EUROLAB 1000 LABORATORY FURNITURE

EUROLAB 1000 LABORATORY FURNITURE

Eurolab 1000 Laboratory Furniture Eurolab System 1000 Designed for areas where flexibility is not of paramount importance. The worktop is directly supported upon the underbench units, which can if necessary, be provided with a front fascia. This system provides the most cost effective solution to laboratory bench design. The unit backs are readily removable to allow easy access for service maintenance. The units can be provided with individual or full length continuous plinths. >>>
View the product on kineticlab.co.uk Kinetic Concepts Ltd
LABORATORY FURNITURE - MOVABLE/MOBILE UNITS

LABORATORY FURNITURE - MOVABLE/MOBILE UNITS

MS/CR - Single cupboard, one shelf, door hung right MS/CL - Single cupboard, one shelf, door hung left MS/SCR - Single cupboard, fascia panel for sink, one shelf, door hung right MS/SCL - Single cupboard, fascia panel for sink, one shelf, door hung left MS/C1R - Single cupboard, drawer, one shelf, door hung right MS/C1L - Single cupboard, drawer, one shelf, door hung left MS2F - Single two drawer filing unit MS5 - Five drawer unit MS/T - Single cupboard, one hinged door, vertical division, runners for 24 single depth trays MS/WB - Single waste bin unit MD/C - Double cupboard, hinged doors, one shelf MD/SC - Double cupboard, fascia panel for sink or fume cupboard, one shelf MD/C1 - Double cupboard, one drawer, one shelf MD/C2 - Double cupboard, two drawers and one shelf MD/5 - Five drawer unit MD/20 - Twenty drawer unit MD/T - Double cupboard, hinged doors, two vertical divisions, runners for 24 single depth trays >>>
View the product on ajt.ltd.btinternet.co.uk Associated Joinery Techniques Limited
TEEFLO 2000 RANGE

TEEFLO 2000 RANGE

The Teeflo 2000 fume cupboard is a durable, well-proven design, fully compliant with BS 7258. The standard material is a fire retardant, chemically resistant GRP. One-piece mouldings allow for easy cleaning and decontamination and offer excellent resistance to both chemical and physical damage. The Teeflo is available in standard widths of 1.0m, 1.2m, 1.5m, 1.8m and 2.0m. A wide selection of linings, work surfaces and wet and dry services are available to suit any application. Under bench cabinets can be supplied to suit acid, solvent or chemical storage. A full selection of control systems are available. >>>
View the product on tecomak.co.uk Tecomak
KOJAIR VK AND VKV CUPBOARDS

KOJAIR VK AND VKV CUPBOARDS

Kojair fume cupboards are designed for laboratory use in industry, hospitals, schools, etc. They protect employees from exposure to materials and gases hazardous to their health. The fume cupboards are attached to their own exhaust ventilation ducts with mechanical air extraction. Construction and materials Kojair fume cupboards are made of stainless (AISI 304), acid-proof (AISI 316) or stove-enamelled steel. The surface is corrosive-proof and easy to keep clean. If necessary, strong solvents may also be used in cleaning. The front sliding door is made of laminated glass. The sliding door comes equipped with a counterweight that holds it in the desired position. Thanks to the counterweight and the bearing-mounted wire wheels, the door opens and closes smoothly and easily. The standard basin surface is made of stainless steel. The taps in the working chamber are protected with acid-proof epoxy paint. The open support frame is a steel-profile construction of the same material as the cupboard. The cupboard comes in two basic varieties: model VK has an upright front wall, while model VKV has a slanted front window. Operating principle The fume cupboard is attached to its own exhaust ventilation duct. The exhaust suction creates an underpressure inside the cupboard. The air flows into the working chamber with almost no turbulence and reaches the exhaust vent through three grills on different levels. The replacement air flows into the cupboard from the entire area of the work opening, preventing hazardous materials or gases from getting out of the working chamber into the room air. The fume cupboard effectively protects the user even at low air-extraction rates. Equipment and installation By default, Kojair fume cupboards are equipped with fluorescent tube lighting, a stainless steel basin and work surface, an open steel support frame with adjustable legs, an electrical distribution board with two grounded outlets, and lighting and ventilation control switches. All switches and outlets required in the operation of the cupboard are located on the front panel at the edge of the work surface. The fume cupboard is ready to be connected to water, drain, gas and electrical systems and the exhaust ventilation duct. The electrical connection and the exhaust duct socket are located on the top; the water and gas connections are at the back of the cupboard. The necessary connections must be performed by a qualified contractor. Dimensions and connections recommended exhaust volume for a 1,000-mm-wide cupboard is 200--400 m3/h designed pressure drop for the nominal air volume is 40 Pa vertical space required by the cupboard with the sliding door in the fully open position is 2,450 mm cupboards with special dimensions and equipment are available by special order standard basin size: 100 x 250 x 140 mm adjustable-height support frame: + 30 mm exhaust duct socket: 200 mm electrical connection: 230 V 50 Hz drain connection: NS 50 water and gas connections: Cu 12 fluorescent tube lighting according to cupboard width 2 x 18--58 W >>>
View the product on kojair.co.uk Kojair (UK) Ltd
EUROLAB 2000 LABORATORY FURNITURE

EUROLAB 2000 LABORATORY FURNITURE

Eurolab 2000 Laboratory Furniture Eurolab System 2000 Increased flexibility is provided by this system. The worktop is supported on powder coated mild steel frame supports, allowing the removal and relocation of under bench units without affecting the worktop. A front fascia is provided to conceal the support frames, and removable rear panels can be provided to conceal service pipework if required. Underbench units can be fitted with adjusters or castors as required. >>>
View the product on kineticlab.co.uk Kinetic Concepts Ltd
LABORATORY FURNITURE - PEDESTAL UNITS

LABORATORY FURNITURE - PEDESTAL UNITS

S/CR - Single cupboard, one shelf, door hung right S/CL - Single cupboard, one shelf, door hung left S/SCR - Single cupboard, fascia panel for sink, one shelf, door hung right S/SCL - Single cupboard, fascia panel for sink, one shelf, door hung left S/C1R - Single cupboard, drawer, one shelf, door hung right S/C1L - Single cupboard, drawer, one shelf, door hung left S2F - Single two drawer filing unit S4 - Four drawer unit S5 - Five drawer unit S/T Single tray unit S/WB - Single waste bin unit D/C - Double cupboard, hinged doors, one shelf D/SC - Double cupboard, fascia panel for sink or fume cupboard, one shelf D/C1 - Double cupboard, one drawer, one shelf D/C2 - Double cupboard, two drawers and one shelf D/4 - Four drawer unit D/5 - Five drawer D/20 - Twenty drawer unit D/T - Double cupboard, hinged doors, two vertical divisions, runners for 24 single depth trays >>>
View the product on ajt.ltd.btinternet.co.uk Associated Joinery Techniques Limited
ULTRAFLO RANGE

ULTRAFLO RANGE

The Ultraflo fume cupboard is probably the most advanced unit currently available. It incorporates an inverter controlled, motorised sash system. Both bench mounted and walk-in versions are available in any custom size. A full range of linings, work surfaces, filtration systems and wet and dry services are available to suit any application. The fume cupboard is controlled by a PLC housed in a lockable access panel above the fume cupboard. The logic controller allows the programming of different modes of operation, adaptable to any airflow standard. Parameters can be adjusted easily by any authorised technician, either locally with the on-board interface, or remotely by a computer link / BMS. For each mode of operation, both the sash height position and the airflow velocity can be programmed. The unit is particularly suitable for weighing procedures where air turbulence has to be minimised whilst containment is maintained. >>>
View the product on tecomak.co.uk Tecomak
EUROLAB 4000 LABORATORY FURNITURE

EUROLAB 4000 LABORATORY FURNITURE

Eurolab 4000 Laboratory Furniture Eurolab System 4000 The ultimate in flexibility, designed for use where benching is continually being adapted into new configurations. Extremely strong and stable when in use, the modules are fully mobile. The units are suspended beneath a 'C' or 'H' frame with locking castors, making it simple to relocate the unit and create a new design format, or provide easy access for routine maintenance inspections. >>>
View the product on kineticlab.co.uk Kinetic Concepts Ltd
EUROLAB 5000 LABORATORY FURNITURE

EUROLAB 5000 LABORATORY FURNITURE

Eurolab 5000 Laboratory Furniture Eurolab System 5000 The most popular of the systems, providing low cost installation with a degree of flexibility. The worktops are supported on a series of powder coated H frames and spans, which can be readily interchanged with different configurations of units. The units are suspended on plates affixed to the legs, are readily removable for access to services, and can be fitted with an individual or continuous plinth as required. >>>
View the product on kineticlab.co.uk Kinetic Concepts Ltd
STEP-IN FUME CUPBOARD

STEP-IN FUME CUPBOARD

Step-In Fume Cupboard Benefitting from a similar design to the walk-in fume cupboard but incorporating a low level work surface 400mm above floor level to allow for sinks and drip cups. Step-in Fume Cupboards are frequently specified for use with distillation equipment. Services and linings are available to user's specifications. The unit is available in a range of colours to complement surrounding furniture. >>>
View the product on kineticlab.co.uk Kinetic Concepts Ltd
WALK-IN FUME CUPBOARD

WALK-IN FUME CUPBOARD

Walk-In Fume Cupboard Designed to accomodate tall test assemblies and to provide high headroom in full hazard and protection environments. Features include a double sash assembly designed to provide independant sash operation and services to match the user's requirements. Options include a hinged or removable intermediate work surface. Combining functionality with design, the walk-in is available in a range of colours to co-ordinate with surrounding furniture. >>>
View the product on kineticlab.co.uk Kinetic Concepts Ltd


  Search    
 
 
 
Search
See all of the sector's products : Laboratories