Selection of 47 products among
116
SCHIEDEL AVANT CHIMNEY SYSTEM
The Schiedel Avant can be used with room sealed and open appliances. it has been specially developed for low temperature and condensing appliances and it is suitable for waste gas temperatures up to
160C for oil and gas.
The Schiedel Avant is a concentric air-flue gas system consisting of a ceramic pipe to take waste gases away and a surrounding concrete shaft to deliver combustion air to the appliance.
The combustion air is drawn in through vents located near the chimney top and transported to the appliance through the angular gap integrated into the chimney design. The waste gases are safely discharged to the outside through the central pipe created with high quality ceramic liners.
Travelling in different directions within the chimney the heat of the waste gases is transferred to the combustion air. This means that the combustion air is pre-heated before it enters the boiler, improving the efficiency of the appliance.
The appliance is connected through a concentric double pipe to the chimney system.
Main features.
Designed for versatile use: room sealed and open appliances under positive and negative pressure operation, in the counter flow and parallel flow method.
Helps reduce energy consumption and increases the efficiency of the appliance by pre-heating the air as it travels towards the appliance.
High quality, thin-walled, inner ceramic liners with profiled surface for durability and performance.
Easy to use, fully ceramic plug-in connections for the appliance.
Safe water gas discharge
Modest space requirement due to compact design.
>>>
View the product on isokern.co.uk
Schiedel Isokern Chimney Systems
SCHIEDEL MULTI CHIMNEY SYSTEM
The Schiedel Multi is a new concept in ceramic chimneys, allowing up to ten room sealed appliances to be conncected to the one chimney. The new Schiedel profiled ceramic liner enables the chimney to
work effectively at low temperatures.
The Schiedel Multi is a concentric air-flue gas system consisting of a ceramic pipe to take waste gases away and a surrounding concrete shaft to deliver combustion air to the appliance.
The combustion air is drawn in through vents located near the chimney top and transported to the appliance through the angular gap in the chimney block. The waste gases are safely discharged to the outside through the central pipe created with high quality ceramic liners.
Travelling in different directions within the chimney, the heat of the waste gases is transferred to the combustion air. This means that the combustion air is pre-heated before it enters the boiler, improving efficiency of the appliance.
The appliance is connected through a concentric double pipe to the chimney system.
High quality, thin-walled, inner ceramic liners with profiled surface for durability & performance.
Simple & efficient ceramic plug-in connections for the appliance.
Operates under negative pressure.
Safe water gas discharge.
Compact design minimising the space required.
Increases the efficiency of the appliance because the combustion air is preheated as it travels towards the appliance.
Decentralized heating, allowing individual billing based on individual boiler energy consumption.
A maximum of 10 appliances can be connected to the system, with one or two per floor.
The inlet for the combustion air is designed to be below the chimney outlet and separated from it so that the waste air and the air supply cannot mix. The combustion air is transported to the appliance through the central high quality ceramic liners.
The new profiled ceramic liner from Schiedel has a fully ceramic plug-in connection for the appliance. The profiled liner has been designed to function at the highest performance levesl. it is resistant to high temperatures, temperature change and acid corrosion. The profile liner is airtight and has a moisture passage value of 2g/hm².
The base of the chimney is formed with a prefabricated unit comprising a cleaning door connection with overflow brake and condensate drain.
The overflow brake in the cleaning door acts asa pressure compensation opening. it reduces the pressure difference between waste gas and supply air channels, creating more regular conditions for combustion. It helps to create the conditions for good fuel efficiency and avoids unnecessary energy losses when appliances are not being used.
The latest revisions to Building Regulations Approved Document L1A introduce new rules for the calculations of carbon emissions from house.
Choose...Chimney Systems Schiedel Swift Schiedel Multi Schiedel Avant Prefabricated ChimneyCeramic Liners Chimney Pots Clay Ridge Tiles Air Bricks Lintels and Firebacks Technical Standards for Clay Liners LiteratureGas Flue BlockSteel Twin Wall Single Wall FlexiblePumice
>>>
View the product on isokern.co.uk
Schiedel Isokern Chimney Systems
CHIMNEY - DOUBLE MODULE SYSTEM DM
When the ease of construction and maximum insulation matter then the Double Module System comes into its own. The system is designed to be quick and easy to install.
The lightweight blocks are
easy to handle. The outer and inner blocks are laid at the same time but with staggered joints for safety and stability. The double layer of pumice blocks separated by an air gap maximises the chimney insulation.
The Pumice Systems are suitable for wood - logs, pellets and chips, solid fuel, oil and gas.
There are 3 systems in different internal diameters to meet the requirements of different appliances and uses:
DM 36, 150mm internal diameter for smaller output inserts, stoves, pellet boilers and cookers
DM 44, 180mm, 200mm and 225mm internal diameters for inserts, stoves and open fires
DM 54, 300mm and 345mm internal diameters for Manor firechests and larger appliances - inserts and open fires
The diameter of the appliance outlet determines the diameter of the chimney required.
Unique Features of the Isokern DM system
Quick and easy to assemble
Lightweight materials, easy to handle
Highly insulating pumice for better draw and minimum heat loss
Staggered joints for maximum safety and stability
Air gaps between outer casing and flue prevents surface staining
Good resistance to temperature variations gives the maximum performance for your appliance
CE certified to EN1858 with the designation T450, NI, D, 3, G(00).
Irish Board of Agrément approval
>>>
View the product on isokern.co.uk
Schiedel Isokern Chimney Systems
EZ-FIT FLEXIBLE VERTICAL BALANCED FLUES
Stainless Steel Inner Liner with Polypropylene Outer –
RED SYSTEM
SUITABLE FOR GRANT VORTEX CONDENSING BOILERS UP TO 26kW
The Grant Red System is the flexible balanced flue solution to nuisance
pluming and cold draughts. It is designed for Grant condensing boilers up to 26Kw (90,000Btu/h) and allows an existing masonry chimney to be utilised rather then re-site the boiler and pipework.
FLEXI KITS
The Red System is supplied in two parts: Pack 1 consists of the boiler connector, adjustable extension, bottom adaptor, terminal, plate and clamp. Pack 2 comprises two lengths of flexible vertical flue pipe (stainless steel and polypropylene) and is available in lengths for 6, 8, 10 and 12 metres.
EXTENSIONS AND ELBOWS
The flexible vertical balanced flue kits share the same EZ-Fit flue extensions and elbows as the Grant ‘White System’. This unique quick fit connection arrangement ensures easy assembly thereby reducing installation costs. The maximum vertical straight length of the flue, from the top of the boiler to the top of the terminal, is 20 metres – using no more than four 45º elbows.
One metre of straight flue length should be deducted for every elbow used. If the flexible liner has to pass around an offset inside the chimney, two metres of straight flue length should be deducted to compensate for this i.e. equivalent two 45º elbows. Flue extensions cannot be cut, adjustable extensions should be used where required.
>>>
View the product on grantuk.com
Grant Engineering (UK) Ltd
CONSORT 7 STOVE
The Consort 7, like other models in the range, has timeless appeal. But beneath those old-style looks lies a truly modern stove. The days of smoke-puffing chimneys and sooty windows are past: with
the Consort 7, you can enjoy a good old wood fire without the harmful emissions or the elbow grease.How have we done it? Firstly, to reduce emissions, an air jet ignites the gases which are released during combustion, so they burn away cleanly. Secondly, a recouper inside the stove directs the heat given off by the fuel, so it stays inside the stove for longer, being directed outwards rather than upwards. And finally, an internal ‘airwash’ creates jets of air between the fire and the glass door, so that carbon deposits can’t reach the glass. Your stove stays cleaner, the environment stays healthier, and your home stays warmer – and that’s all you could ask from a stove.
>>>
View the product on parkray-stoves.co.uk
Parkray Ltd
