Chilled beams :
1 product
M SERIES CHILLED WATER COOLING MODULE
PACKING LIST
Package includes:
1- Chilled Water Coil Module
2- Latches
2- Latch Keepers
8- Screws for latches and keepers
APPLICATIONS
The Unico System designed and built chilled water coil
modules
can be easily installed with the matching Unico
System blower modules (refer to table below). The chilled
water coil module can be used for zone cooling in a
central chiller system or in combination with a residential
chilled water unit. For large applications, multiple
systems can be installed to cool more than one zone.
Capacities range from 15,400 Btu/hr to 52,400 Btu/hr (4.5
to 15kW) for cooling and 19,200 Btu/hr – 127,900 Btu/hr
(56 to 37.5 kW) for heating. For smaller applications use
the M1218 unit (See Bulletin 30-10). The chilled water
coil module is compatible with ground source chillers for
geothermal applications.
Chilled Water Module Matching Blower
MC2430W MB2430L
MC3642W MB3642L
MC4860W MB4860L
CABINET CONSTRUCTION
The cabinet is constructed of 22 gauge (0.030-in, 0.762-
mm) galvanized steel with removable access panels on
both sides for ease of service. The cabinet is fully lined
with closed cell insulation. The cabinet does not contain
fiberglass insulation. Easy snap latches are included for
quick field assembly. Refer to dimensional drawing for
sizes.
COIL CONSTRUCTION
Unico System designed coils are constructed of evenly
spaced aluminum fins mechanically bonded to copper
tubes. The tubes are 3/8-inch (9.5 mm) outside diameter.
Full fin collars provide the greatest tube-fin contact for
excellent heat transfer. The coil is pressure tested and then
factory leak tested. The drain pan is constructed of
stainless steel for maximum corrosion protection with a
3/4-in (19-mm) FPT drain connection. All water lines are
sweat connections extending outside of the cabinet.
>>>
View the product on unicosystem.co.uk
Unico Climate Control
