Chemicals: les fournisseurs, grossistes et fabricants sur EDGb2b
Search   
Search among 9 853 suppliers and 84 104 products

Chemicals :

294 products
Select the category

    Gas

     (1 products)
    Selection of 41 products among 294
    LABORATORY CHEMICAL MANUFACTURERS ACETIC ACID

    LABORATORY CHEMICAL MANUFACTURERS ACETIC ACID
    Other names are Acetic Acid Glacial, Glacial Acetic Acid, Ethanoic Acid, Ethylic Acid and Methanecarboxylic Acid ReAgent manufactures and supplies Acetic Acid in both pure forms (referred to as Glacial Acetic Acid, containing no water) or in dilute solutions. We supply in quantities ranging from small packs up to 1000L Intermediate Bulk Containers. We supply a number of different grades of product – LRG (Laboratory Grade), suitable for the majority of applications, AR (Analytical Reagent Grade), for analytical purposes, technical grades and so on. We can also provide chemical blends involving acetic acid, such as acetic acid and chloroform, which are commonly used for oil testing purposes. >>>
    View the product on ReAgent
    ANALYTICAL VOLUMETRIC SOLUTIONS

    ANALYTICAL VOLUMETRIC SOLUTIONS
    Reagecon manufacture a complete range of volumetric solutions for all analytical laboratory applications which can be used for manual or automatic titrations. These are available as ready to use aqueous and non-aqueous titrants and in concentrated format. READY TO USE AQUEOUS SOLUTIONS This range of standardised solutions provides a convenient method for accurate volumetric analysis in the laboratory and a cost-effective answer to time and labour consuming preparation problems. These products are certified to a specification as outlined in the Certificate of Analysis. Lot No. and Expiry Date are printed on the label. Where possible, all of these solutions are certified traceable to N.I.S.T and this will be stated in the Certificate of Analysis. Please Note: All 10 litre pack sizes are in “Bag-in-Box” containers. (Please contact your distributor/Reagecon if you require 5L or 20L pack size “Bag-in-Box”). >>>
    View the product on reagecon.com Reagecon
    ACUDEL® MODIFIED POLYPHENYLSULFONE

    ACUDEL® MODIFIED POLYPHENYLSULFONE
    These proprietary materials open the door to more cost-sensitive applications that require toughness and chemical resistance as well as hydrolytic and dimensional stability. Key Features 197°C HDT Good toughness Excellent hydrolytic stability Good chemical resistance Opaque Typical Applications Commercial aircraft interiors Hot beverage equipment Food service trays Pipe fittings and manifolds Featured Application Better ESCR than PSU Excellent long-term hydrostatic strength Approved for potable water >>>
    View the product on solvay.com Solvay Polymers Limited
    JASON BODY WASH LAVENDER 30 OZ

    JASON BODY WASH LAVENDER 30 OZ
    Concentrated & Moisturizing, Never Dries Your Skin For The Bath: Foamy & luxurious, rich natural oils, emollients and humectants are combined to make your bathing experience a new pleasure. Use a capful of this beautifully fragranced, precious bubbling bath for your bath. Delicate Lavender, relaxing Chamomile and Comfrey, rich natural oils of Avocado, Apricot and Vitamin E are concentrated into a formula of unequaled quality. For The Shower: Rich lather and soothing comfort are your natural choices if you care about your body. Pour or pump this concentrated formula onto a loofah, sponge or washcloth for your body. Enjoy! pH balanced formula. Natural deodorant action. Never dries out your skin. Ends the dry, itchy feeling common to hot, cold and dry climates. Not animal tested. Cruelty free. Made in USA Ingredients: Aqua (Purified Soft Water), Sodium Myreth Sulfate, Aloe Barbadensis Gel (certified organic), Decyl Glucoside, Glycerin (vege), Lavandula Angustifolia (lavender extra. >>>
    View the product on netechnology.co.uk NE Technology Ltd
    BODY LOTION - BEKAA ROSE HAND AND BODY LOTION

    BODY LOTION - BEKAA ROSE HAND AND BODY LOTION
    Bekaa Rose Hand and Body Lotion An eternal fragrance prized for thousands of years, an ancient symbol of love and beauty. The Otto of hand picked Bekaa Damask Rose reveals delicately caressing notes of Citrus, Chamomile, Ylang-ylang and Cinnamon. An ultimate expression of sensuality, luxury and purity. A rich and creamy non-greasy lotion with the highest quality certified organic vegetable oils and the purifying power of Rose which is known to improve micro circulation while strengthening capillaries. This lotion refreshes, protects and strengthens your skin and leaves it soft and satin smooth. Key Ingredients: Cocoa Butter Coconut Oil Jojoba Oil Marula Oil Pure Essential Oils Sunflower Oil Sweet Almond Oil Vitamin E >>>
    View the product on parseme.com Parseme
    QC1050 EPOXY BODY/PLATINUM CELL

    QC1050 EPOXY BODY/PLATINUM CELL
    Epoxy Body/Platinum Cell, platinised 12mm x 100mm with waterproof mini-din plug, for use with Star Series Meters. If you require this electrode for a non-Star Series meter please call 01342 820820 or email enquiries@qclscientific.com to discuss the options available. Field & Laboratory use Cell Constant: approx 1.0 (cm-1) Conductivity Range: 1 µS/cm to 20 mS/cm Cable Length: 1.5m Min/Max Immersion: 20/90 mm >>>
    View the product on qclscientific.com QuadraChem Laboratories Ltd
    A BRILLIANT FUTURE FOR HYDROGEN PEROXIDE

    A BRILLIANT FUTURE FOR HYDROGEN PEROXIDE
    Symbolized by the chemical formula H2O2, this "ecological" product breaks down essentially into water and oxygen, qualifying it as "bio-degradable". Discovered in 1818 by a French chemist, Louis-Jacques Thénard, today it is used extensively in paper manufacture, and is present in our everyday life. You have guessed it, hydrogen peroxide it is, a product for which Arkema is the world’s 3rd largest manufacturer. >>>
    View the product on arkemagroup.com/arkema/gb/home/d_home.cfm Arkema Group
    CATALYTIC CHLORINE DIOXIDE - CLOX-CAT R

    CATALYTIC CHLORINE DIOXIDE - CLOX-CAT R
    No chemical mixing. No electro-chemical cassettes. Doses directly into pressurised lines. No high concentration solutions. No chlorinated by-products. No chlorine or excess acid. No residual chlorite in chlorine dioxide product stream. No storage of chlorine dioxide required. No additional booster equipment. Chlorine dioxide concentrations of less than 700 mg/litre. Instantaneous chlorine dioxide production in dilute solution. The Cloxide Catalytic range of chlorine dioxide generator systems deliver ultra-pure chlorine dioxide from 100 gms up to 25,000 gms per day. The system uses:- Cloxide R - a modified sodium chlorite precursor for the generation of chlorine dioxide Regenerant S - sulphuric acid for regeneration of the ion-exchange columns. Please note that this product is only used for regeneration and is not involved in the production of chlorine dioxide. Catalytic Conversion Cartridge - a catalytic granular bed (Pt/Al 2O3) selected for high activity and fast conversion of chlorous acid to chlorine dioxide The chlorine dioxide output stream is delivered directly via a digital dosing injection system(s) on a proportional basis from either an impulse water meter or flow monitor. Clearwater Â’s Total Management and Service Package ensures that all aspects of operating this chlorine dioxide system are undertaken by trained engineers including maintenance and chemical handling. >>>
    View the product on clearwater.eu.com/ Clearwater Technology Ltd
    BALMS/POLISHES - ROSE OTTO BODY BALM, 170ML

    BALMS/POLISHES - ROSE OTTO BODY BALM, 170ML
    BEAUTY EDITOR FAVOURITE: “As a rose connoisseur only the best rose scents and products get into my house or on my body. Some sublime loves: the fresh, rose-scented lip and body balms by Balance Me,” Kate Shapland, Beauty Editor, Daily Telegraph Weekend A luxurious and exquisitely fragranced body balm. Rose Otto, renowned for its nourishing and skin-calming properties is combined with Jojoba and Sweet Almond oils to achieve a blend of fatty acids and vitamins A, B and E to optimise natural skin elasticity. This balm will protect, soothe and moisturise all skin types including very sensitive or dry. It’s perfect for all seasons, leaving a subtle sheen on the body and makes an ideal travel companion. >>>
    View the product on balanceme.co.uk Balance Me
    POLYMER ADDITIVES - CAPS & CLOSURES

    POLYMER ADDITIVES - CAPS & CLOSURES
    Slip additives are required to allow screw closures such as bottle tops to be applied tightly yet still be easily removed. This is particularly important for carbonated drinks which utilise liner compounds inside caps to ensure tight seals. The slip additive additionally aids the moulding and release of the cap in injection and compression moulding processes. Slip additives are also commonly added to vinyl plastisols used as sealing rings on rotatable metal closures. Migration of the slip agent to the surface of the plastisol on curing reduces the torque required to release the closure when subsequently applied to a glass container. Sensitive applications, such as bottled water and foods, require additives with exceptional stability and low odour. Standard slip agents are more prone to oxidation and begin to break down, leading to changes in taste and odour. Croda's Incroslip speciality additives provide a breakthrough in odour reduction, very low colour, and superb colour stability both during storage and processing. Developed using proprietary technology (patent pending), Incroslip additives provide a range of optimised combinations of slip and oxidative stability to suit the particular requirements of your application. Available in fine powder form, they are ideal for inclusion in plastisols in particular. >>>
    View the product on croda.com/europe/pa Croda Polymer Additives
    DECAL 4201/4202 ACRYLIC FLEXO INK BINDER

    DECAL 4201/4202 ACRYLIC FLEXO INK BINDER
    DeCAL 4201 is an acrylic binder ideally suited for use in waterbased flexographic inks for paper and corrugated board. The product exists as an alkali soluble carboxylated copolymer emulsion but can also be supplied in its neutralized varnish form as DeCAL 4202. In both cases inks prepared using either DeCAL 4201 or DeCAL 4202 possess excellent machine stability/resolubility, viscosity/pH stability, favourable viscosity/dilution curves and excellent pigment wetting characteristics. 1. Typical Properties: Tg : 35C Acid value : 77mgKOH/g solid resin Initial softening point : 100C See Technical Data Sheet for more details 2. Applications: Neutralisation of DeCAL 4201 can be achieved using any suitable alkali or volatile amine. These include Ammonia, Monoethanolamine(MEA), Diethanolamine (DMAE), Aminomethyl propanol(AMP) or Triethanolamine(TEA). DeCAL 4202 is supplied pre-neutralised with the commonly used Monoethanolamine(MEA). DeCAL 4201 tends to swell considerably in the early stages of neutralisation. As a result it is recommended that the product be prediluted to with water prior to any neutralisation and then left to stabilise for several hours afterwards before use. For full solublisation of the polymer the pH must remain above pH 7 where it exhibits excellent pH/viscosity stability. >>>
    View the product on devinechemicals.co.uk Devine Chemicals
    IN-MOULD PAINTS

    IN-MOULD PAINTS
    To complement our pigment dispersions we have developed the eclipse range of one-pack polyurethane paints, available in solvent or water based carriers. Eclipse paints are used as in-mould paints prior to moulding or formulated to allow post application. These paints can be used to mask minor defects or mould flow lines whilst opening opportunities to produce finishes and effects previously limited to post applied paints. Our paints are based on Aliphatic polymers and provide exceptional UV resistance, enabling the possible removal of expensive UV resistance additives from the polyurethane system. We can include flexing and matting agents, conductive pigments and a variety of finish effects, metallic, pearlescent and textured. Colour match service : * Colour match to any recognised colour reference such as RAL, Pantone, BS number or physical sample. * 5 working day colour match service * Matched colour spray-out card provided * 1Ltr sample of paint provided * Minimal charge to cover match and postage >>>
    View the product on eclchem.com ECL Chemicals Ltd
    CREATIVE RESIN - METALLURE

    CREATIVE RESIN - METALLURE
    Metallure 2000 is a unique process, which has been chemically engineered to work solely with a specially adapted Creative Resin Outline and colour system. This simple to use yet ingenious process transforms any colour outline into a brilliant chrome or deep Lustre Brass in a matter of seconds, becoming an integral part of the resin itself. Three grades of metallure are available, one for use as an internal application, the second for use within an insulated glass unit and the third as an application for external use. All Metallure grades are guaranteed for a minimum of 10 years. It will not fade, crack, peel or tarnish. >>>
    View the product on creative-resins.co.uk CREATIVE RESINS INTERNATIONAL
    BENCH TOP MODEL - DIGITAL G-SERIES PH AND CONDUCTIVITY MET

    BENCH TOP MODEL - DIGITAL G-SERIES PH AND CONDUCTIVITY MET
    This meter has been designed to perform to GLP and GMP compliance requirements for validation and calibration documentation and management. Simultaneous display of pH and conductivity. Incorporating the world's first intelligent sensors, which store the cell constant in the sensor itself as well as sensor information and serial number for identification. Large LCD display, printer capability, data memory, RS232 control, and expandability using an automated sampler are just a few of the possibilities these meters offer. WM-50EG Dual pH and Conductivity meter with built in printer. >>>
    View the product on dkktoa.com DKK-TOA
    ATRITOR DRYER PULVERISER

    ATRITOR DRYER PULVERISER
    The Atritor Dryer-Pulveriser has been in continuous manufacture for 80 years. It has a quite unique design with pulverising occurring predominantly by attrition. The mill is a very compact air-swept flash dryer and temperature differentials of over 500° C ensure high evaporative capacity and thermal efficiency. Internal wear parts are manufactured from abrasion resistant irons produced in our own foundry. They are extremely quick and easy to change through the hinged door of the mill. The size of the feed can be up to 50mm with grinding capacities as high as 20t/h. The mill incorporates an integral product particle size controller for consistent product quality, which, unusually, is unaffected by processing rate. The newly developed "B" series extends the evaporative capacity of a single unit to 6t/h. These are of lighter duty construction, designed for operation on non-abrasive materials and where drying is the major function. >>>
    View the product on atritor.com Atritor
    CATALYSTS

    CATALYSTS
    Catalysts are typically processed at high temperatures and must then be cooled before handling and packaging. Catalyst coolers have been supplied to producers worldwide for various sizes and types of catalyst products, including: Activated Alumina Alumina Catalyst FCC Catalyst Molecular Sieve Beads Zeolites The Bulkflow Heat Exchanger has a large heat transfer area to cool high temperature products. >>>
    View the product on bulkflow.com Bulkflow Technologies
    DOMING RESINS

    DOMING RESINS
    Doming resins are glass-clear resins, formulated from epoxy and polyurethane technology These resins add visual impact to badges, emblems, decals or any other promotional article. Doming resins provide a 3D lens on the surface of your component. In addition, our clear casting resins can be used to mould / cast statues, souvenirs, or even to encapsulate an item in a clear casing for eternity. >>>
    View the product on elichem.co.uk Eli-Chem Resins UK Limited
    AEROSOL PAINT

    AEROSOL PAINT
    The Speedi Spray is The Needham Group's general-purpose aerosol paint supplied in a large (400ml) aerosol can. It is a high quality, fast drying paint manufactured using an acrylic resin making it suitable for interior and exterior use. It provides excellent coverage and adhesion on a very wide variety of porous and non-porous surfaces and produces a quick drying, high contrast, bleed-free mark. When dry, the ink is waterproof and oil-resistant. As with any spray paint, the Speedi-Spray can be used for spraying directly onto a surface. It also provides a "clean" solution for stencilling applications - eliminating the need for rollers and ink pads. The Speedi Sprays are available in 6 standard colours: Black, Blue, Green, Red, White and Yellow. Our Britink Speedi Sprays are CFC-free and contain no propellant alleged to damage the ozone. >>>
    View the product on needham-group.com The Needham Group - Coding Systems Division
    BDH PROLABO ALGOSOL N ACID NEUTRALISER

    BDH PROLABO ALGOSOL N ACID NEUTRALISER
    99910.414 10kg Algosol is a unique natural product produced from seaweed and is suitable for the neutralisation of acids, such as hydrochloric, sulphuric, nitric and hydrofluoric. It absorb spills immediately without breaking up and can be used to extinguish fire. • Biodegradable, non-toxic, non-flammable and dust-free • Can be swept up easily • Stable, chemically inert and non-polluting 1 kg of Algosol neutralises180 ml 95% sulphuric acid or 530 ml of 36% hydrochloric acid or 400 ml of 70% nitric acid or 260 ml of 40% hydrofluoric acid. >>>
    View the product on uk.vwr.com VWR
    MACHINABLE PURE OXIDES

    MACHINABLE PURE OXIDES
    In the past, we have produced for researchers 150mm lengths of high purity aluminium oxide ( Alumina ) and magnesium oxide of various diameters. Because they were made by vacuum extrusion, machining them was an art. Their density was lower than that achievable by other processes. We can now produce a range of oxides of much higher density which are considerably easier to machine, with wall thickness down to 0.3mm. The round pre-forms at present available are 10mm in diameter and 20mm long, when held in a simple plastic collet, Alumina; stabilised Zirconia and magnesium oxide can be drilled and turned with ease >>>
    View the product on ceramic-substrates.co.uk/ Ceramic Substrates Components Ltd
    CABINET BASE SEALANT RESIN FOR SLOT CUTTERS (BACK FILLING)

    CABINET BASE SEALANT RESIN FOR SLOT CUTTERS (BACK FILLING)
    The ISP Epoxy twin pack is part of a new range of resin products formulated to give the customer peace of mind. The formulation of this compound has been meticulously engineered to use only active Epoxy constituents. Previous market trends have seen the use of both plasticiser and, in some cases, even tar to dilute the Epoxy compound. ISP PC 5882 (BLACK), PC 5749 (CLEAR) and ISP Back Filling Resin for slot cutting PC5581 system has utilised new chemical science to create true Epoxy compound offering the user: Good flow Self-levelling characteristics Good adhesion Non-tacky surface finish Low odour Excellent drilling properties Temperature range of -25°C to 120°C Complete Thermoset technology without dilution >>>
    View the product on isp-cablejointing.co.uk ISP Industrial Support ProductsLtd


    12Suivant >>Fin >
    Go to page


      Search    
     
     
     
    Search
    See all of the sector's products : Chemicals