Selection of 40 products among
43
HAPSITE SMART CHEMICAL IDENTIFICATION SYSTEM
Fast, Easy, On-Scene Identification of Unknowns
Now get fast, on-scene detection, identification and quantitation of toxic industrial chemicals (TICs) and chemical warfare agents (CWAs) with
HAPSITE® Smart, the only person-portable, gas chromatograph/mass spectrometer (GC/MS) that gives you lab-quality data with the push of a single button. GC/MS is the benchmark for positive identification of organic chemicals with the highest degree of accuracy of any available analytical technique. And with easy-to-operate HAPSITE Smart Chemical Identification System, users get the confirmatory results within minutes that are necessary to make critical decisions affecting life, health, safety and the mission.
Features at a Glance:
* Fast, confirmatory results in the field directly comparable to laboratory GC/MS data
* Pre-programmed methods to obtain quality data in minutes with a few simple keystrokes
* Bright graphical display of chromatograms, spectra, instrument condition, and cal curves on the instrument for easy viewing
* Weather-resistant and easily decontaminated
* Built-in GPS records exact sampling location with date/time stamp for legally defensible data
>>>
View the product on inficon.com
INFICON
PARTICLE COUNTER - ABAKUS® MOBIL AIR
ABAKUS® MOBIL AIR
Abakus® mobil air portable laser particle counters for air and gases including to ISO 14644
To find out prices for this product please call us or use our online enquiry
system. If you send an online enquiry the Application Description is important to us in order to identify the best solution available - so please give us as much technical information as you can. Don't forget to enter your quantity, then just click on 'add to my enquiries'.
detailsThe Abakus® particle counter is an evaluation system for the measurement of number and size of particles in air and in gaseous media. The measuring system is suitable for fixed and mobile applications. The equipment options of four different particle sensors (LDS 328, LDS 328s, LDS 528 or LDS 2/2) enables the particle counter to cover the measuring range from 0.2 µm to 50 µm, and 5 µm to 500 µm (with the sensor LDS 2/2), thus being suitable for a wide range of measuring tasks. The easy to use menu navigation ensures efficient working right from the outset. During the measurement the LCD display provides an overview of 16 particle size channels, date, time and the number of the current measurement. There is a tabular representation of the measuring results. At the end of a measurement the data can be printed out via a thermo printer. The software Log and Show allows further processing of the measured results on the PC in various programs (MS-Excel, Lotus 1-2-3 etc). Direct measuring and filing is also possible via the software. The autocalibration function of the particle counter allows for simple testing and secondary calibration of the system.
Available in two versions: 1. mains-operated version 230V/AC 2. version with rechargeable battery 24V/DC / power supply
Areas of application: ISO14644. Particle monitoring and inspection of cleanrooms, clean workbenches, isolators, filter facilities in surgery rooms, compressed air, filling stations in the pharmaceutical industry, efficiency testing filters, measuring cleanliness of surfaces, etc. With 2/2 sensor monitoring particle size in paint processes and industrial cleanroom assembly areas
featuresMethod: Light scattering 90° laser
Particle size channel: sizes freely selectable e.g. in the range 0.5-20 µm / 0.3-10 µm/ 0.2-5 µm max. 16 channel
Volume flow: 28.3 l/min. / optional 2.8 l/min. with flush air controlled electronically
Data contents: date, time, measuring volume, particle number, cleanroom class to ISO14644
Value readout: display, built-in printer, PC software LAS 31, RS232, threshold overstepping
Value memory: 2.400 records / + CF card
Supply unit: 230 V/AC/ battery 24 V/DC
Dimensions (h x w x d)/ weight/material: Ama LDS 328 battery 200 x 360 x 190 mm, 7kg, aluminum; Ama LDS 228 / Ama LDS 328 / Ama LDS 528 200 x 360 x 260 mm, 10 kg, aluminum / 13 kg, stainless steel; Ama LHS 128 / Ama LHS 228 200 x 360 x 445 mm, 16.5 kg, stainless steel
>>>
View the product on ac-fluid.co.uk
AC Fluid Technology
CLINICAL CHEMISTRY ANALYZERS - KONELAB PRIME 30
The Thermo Scientific Konelab PRIME 30 is designed for enzyme, substrate, electrolyte and specific proteins analysis as well as for drugs of abuse tests and therapeutic drug monitoring.
Product
Detail
The Thermo Scientific Konelab PRIME 30 is a cost-effective choice for medium-sized laboratories. It can be used as a stand-alone instrument or integrated as part of a laboratory automation system. New design of the Thermo Scientific Konelab PRIME 30 includes integrated workstation which makes the analyzer an ideal choice for laboratories with limited space. Touch screen, in addition to an intuitive graphical user interface in more than 15 languages, make data management convenient and fast. New features, like sample clot detection, improve operational efficiency and result integrity. The unique low-volume cuvette design ensures small reagent consumption and low running costs.
Capacity of up to 300 tests per hour
Continuous access to samples, reagents and cuvettes
On-board capacity of 84 routine samples, 6 STAT samples
39 fixed, cooled calibrator and control positions
45 refrigerated reagent positions, real-time reagent status seen
600 cuvette storage positions
Interface to laboratory automation
Automatic clot detection to secure result integrity
Integrated workstation with touch screen
>>>
View the product on thermo.com
Thermo PRISM
ISCO-STIP IN-SITU PROCESS BUOYS NH4 & NO3 - NEW PO4
ISCO-STIP IN-SITU PROCESS BUOYS NH4 & NO3 - NEW PO4..
The Process Buoys measure nitrate and ammonium through direct immersion in aeration basins or final effluent. The buoy is filled by the
hydrostatic pressure of the water, and emptied by air pressure. This eliminates the need for any pumps in the wastewater. Valves contact only air, reagents, and calibration standards, assuring a high level of reliability.
How it works - Isco-Stip Process Buoy PBS 1 (NH4)
For ammonia measurement the Isco-Stip Process Buoy PBS 1 (NH4) is equipped with a purgeable cell, in which, wastewater is separated from sludge and solids before it is fed into the reaction cell. During the ammonium measurement, the necessary pH value is accurately regulated to assure high measuring accuracy with low reagent consumption. The buoy automatically calibrates itself daily using the standard addition method, and at the same time compensates for variability in the wastewater.
Features:
Measurement directly in aeration basins
Automatic self-calibration using standard addition method
Normal measuring range:
• 0.1 - 50 mg/litre NH4-N (Ammonium)
Analysis delay time:
• 5 minutes (NH4)
No sample preparation, pumps, or transfer lines
6-hour on-screen graph, scrollable through 14 days
90 day data storage on diskette
Programmable concentration/fault alarm
>>>
View the product on envitech.co.uk
Envitech Ltd
PARTICLE COUNTER - ATM 225 AEROSOL GENERATOR
ATM 225 Aerosol generator
The ATM 225 aerosol generator is used for generating test aerosols with defined properties. The number concentration of the aerosol particles can be set. Go to the air
and gas monitoring category to view other instruments for air and gas monitoring.
To find out prices for this product please call us or use our online enquiry system. If you send an online enquiry the Application Description is important to us in order to identify the best solution available - so please give us as much technical information as you can. Don't forget to enter your quantity, then just click on add to my enquiries.
detailsThe ATM 225 aerosol generator is used for generating test aerosols with defined properties. The number concentration of the aerosol particles can be set. From the determined concentration distributions of the produced DEHS aerosol it becomes evident that in the range of expected MPPS (Most Penetration Particle 0.2-0.3 µm) a very high particle concentration is provided (> 107 particles/cm3). In the measuring range of many optical particle counters (> 0.3-0.5 µm) a particle number (0.5 x 106 l particles/cm3) is generated in line with the requirements. The design and technological features of the device ensure a high stability of particle size distribution and particle concentration. The generated aerosol is thus very well reproducible.
The dimensions as well as low weight are ideal for mobile and flexible use. The core of the ATM 225 is an innovative atomizer completely made of stainless steel. It is a dual fabric nozzle working according to the injector principle, which is connected to an impact trap. It ensures that large droplets generated during the atomizing process are immediately returned and basically defines the generated particle size distribution. The compressed air required for atomizing is generated by a noiseless piston compressor. Before entering the atomizer the generated compressed air is cleaned by a HEPA filter. The standard volume flow is set at 250 l/h.
Areas of application: An essential area of application of the aerosol generator ATM 225 is the testing of high efficiency filters or the acceptance and control measurements of clean rooms, laminar flow boxes and safety workbenches.
featuresMethod: atomizer
Volume flow: 250 l/h
Particle Materials: DEHS, DOP, paraffin, Emery 3004, Latex suspensions; Specification / DEHS; > 100,000,000 particles/cm3; 0,2 µm / 2 x 10/7 Part./cm3; 0,5 µm / 5 x 10/5 Part./cm3; 1 µm / 1 x 10/5 Part./cm3; modal value 0,25 µm; sample flow 2,5 g/h
Operating time: 80 ml fill: approx. 25 h
Power supply: 12 V/DC power supply
Dimensions (h x w x d)/ weight/material: 220 x 300 x 180 mm, 4.5 kg, aluminum
>>>
View the product on ac-fluid.co.uk
AC Fluid Technology
PARTICLE COUNTER - FH5 IMPAKTOR
FH5 IMPAKTOR
Universal air sampler using impaction or filter processes for control of microbiological air quality. Go to the air and gas monitoring category to view other instruments for air and
gas monitoring.
To find out prices for this product please call us or use our online enquiry system. If you send an online enquiry the Application Description is important to us in order to identify the best solution available - so please give us as much technical information as you can. Don't forget to enter your quantity, then just click on add to my enquiries.
detailsThe air sampler is a measuring instrument for testing the bioburden of the air, which can be used for both the impaction method as well as the filtration method. During the measuring procedure the air is drawn in by a radial fan specifically developed for the FH5 and the flow is automatically kept constant (impeller anemometer). The electronics control the measurement cycle. The sample volume selected via menu key flows in a defined measuring time through the filter attachment or via the Petri dish with the culture medium. In the event of insufficient air flow the device switches off and the display shows nozzle blocked or filter blocked with the filtration method. In addition, the failure triggers a triple audio signal. In the event of too high air flow rate (device open, no nozzle inserted, filter torn, no filter inserted) the device switches off likewise and the message slot open or filter defect is displayed. A fully charged battery allows at least 90 consecutive measurements of 5 min. each.
Areas of application: Hospitals, pharmaceutical, cosmetics and foodstuff industry. Here there are stringent requirements for the bioburden of the ambient air and air conditioning. Bioburden emissions of waste sites, sewage plants and irrigation fields are increasingly attracting attention.
featuresMethod: impaction/filtration
Measuring range: 25-1000 l
Volume flow: 100 l/min. impaction method, 30 l/min. filtration method, electronically controlled
Particle Materials: (number of germs on the Petri dish or on the gelatin filter manually counted after treatment)
Operating time: 7h battery operation
Power supply: 16.8 V/charge time 4.5 h / 450 mA
Dimensions (h x w x d)/ weight/material: 250 x 150 x 150 mm, 3 kg, aluminum / titanium
>>>
View the product on ac-fluid.co.uk
AC Fluid Technology
FULLY AUTOMATED CLINICAL CHEMISTRY ANALYZER - KONELAB PRIME 60
The Konelab PRIME 60 is an ideal system for medium-sized laboratories as a stand-alone instrument or as a part of a high-capacity workcell for routine and specialty testing.
Product Detail
Konelab PRIME 60 - operational efficiency and accurate results
Konelab PRIME 60 is a fully automated clinical chemistry analyzer. It offers an expanding scope of assay test parameters with a view to future applications. The highly-developed Konelab PRIME 60 is an integrated system for routine clinical chemistry tests, electrolytes and special chemistries including specific proteins, TDM, DoA and toxicology tests.
Capacity of up to 600 tests per hour
Continuous access to samples, reagents and cuvettes
On-board capacity of 84 routine samples, 6 STAT samples
39 fixed, cooled calibrator and control positions
45 refrigerated reagent positions, real-time reagent status seen
2,100 cuvette storage positions
Interface to laboratory automation
Automatic clot detection to secure result integrity
Integrated workstation with touch screen to facilitate routine work
The proven, unique low-volume multicell cuvette technology has been further developed to meet the demands of the high throughput system. The large cuvette magazine gives the user real walk-away freedom. These 12-cell cuvettes require reaction volumes of only 120 to 150 ul awarding the user with low running costs.
>>>
View the product on thermo.com
Thermo PRISM
PARTICLE COUNTER - TCC-PSS AIR LASER PARTICLE COUNTER
TCC-PSS AIR Laser particle counter
PCSS AIR Laser Particle counter with 2 channels for particle monitoring air cleanliness – in Medical, Pharmaceutical and Industrial Facilities
To find out
prices for this product please call us or use our online enquiry system. If you send an online enquiry the Application Description is important to us in order to identify the best solution available - so please give us as much technical information as you can. Don't forget to enter your quantity, then just click on 'add to my enquiries'.
detailsThe TCC-PSS air particle counter is a monitoring system for online measurement of the number and size of particles in the air. The measuring system is suitable for stationary use and covers with its various sensors a measuring range of 0.2 µm up to 500 µm. Depending on the sensor in use, the TCC can monitor within this range three freely selectable size classes and transmit the particle number either as analogue signal (current e.g. 4-20 mA) to a SPS or to the RS232. For each channel it is possible to set threshold values which monitor the degree of contamination and release an alarm signal if required. The measuring mode of the TCC is for timedriven measurements only which means that the rate of flow through the laser sensor must be kept constant (flow controller or similar). In connection with the PSS air box the air is drawn in by a piston pump through the measuring senor. For compressed air and gases a pressure reducer is used.
Areas of application: Monitoring of air cleanliness in hospitals, pharmaceuticals, cosmetics and foodstuff industry, where there are stringent requirements for the ambient air and air conditioning. Use in the semi-conductor industry, printed circuit board manufacturing and micro-mechanical production, in the automobile industry, in safety engineering and in nano technology. For monitoring flush processes in pipelines and containers as well as compressed air and gas.
Accessories: Measuring software SW-TCC; Parameter software SW-Para
featuresMethod: light scattering 90° laser
Particle size channel: sizes freely selectable 0.3-0.5-5 µm, 5 to 500 µm, max. 3 channels
Volume flow: 28.3 l/min. monitored
Data contents: date, time, measuring volume, particle number; with software SW-TCC air
Value readout: display, current, 4-20 mA, RS232, threshold overstepping
Value memory: none
Supply unit: 230 V/AC power supply / 24 V/DC
Dimensions (h x w x d)/ weight/material: TCC 185 x 245 x 120 mm, 1.5 kg, plastic; PCSS air 150 x 270 x 220 mm, 5 kg, stainless steel
>>>
View the product on ac-fluid.co.uk
AC Fluid Technology
