Chargeurs électriques (translation in progress): suppliers, wholesalers and manufacturers on Hellopro
Search   


Chargeurs électriques (translation in progress) :

124 products
Select the category
Selection of 40 products among 124
SOLAR ELECTRIC ROOF TILES - C21E

SOLAR ELECTRIC ROOF TILES - C21E
C21e is a unique, roof integrated, solar electric tile using the most efficient solar cells in the world.This particular solar application works best for new builds, because each photovoltaic tile replaces four conventional roof tiles and is attached straight to the roof battens.C21e has many benefits over conventional bolt-on solar panel systems and has won a host of industry awards.C21e - Key Features:* No extra planning - no need to alter roof lines, colour or pitch. C21e tiles sit flush with conventional roof tiles.* Standard installation - tiles fit with conventional roofing practice without the need to adjust battens. One solar tile takes the place of four standard tiles.* No specialist skills - all roofing work is carried out by the roofing contractor allowing electrical and plumbing work to follow build programme.* Fast to fit - tiles are integrated in exactly the same way as conventional interlocking tiles. >>>
View the product on solarcentury.co.uk Solar Century
YD-V1 + DIRECT CHARGER

YD-V1 + DIRECT CHARGER
Specifications: - Bluetooth® Specification: Version 2.0 - Weight: 0.25 oz (7 grams) - Approval Obtained: BQB, CE, FCC, IC, C-TICK - Bluetooth® Chip/Class: CSR Chip Bluecore 4/Class II - Profiles Supported: HSP, HF - Frequency Band: 2.402 MHz ~ 2.480 MHz - RF Channels: 79 charging cradle - Operating Range: 33 Feet (10 meters) - Operation Voltage: 3.7VDC is detected and/or not being used for more than one hour - Power Consumption In Talking Mode: 13 mA - Battery: Li-ion Battery - Talk Time: 6 Hours - Standby Time: 105 Hours from the charging cradle - Audio: (Mic) -42 +/-3dB @ 1KHz (Speaker) 32 ohm, 100 +/-dB @ 1KHz - Clear Voice Quality: 10 Level Volume Controls - Operation Temperature: 20°C to 60°C - Storage Temperature: 20°C to 60°C Features: - Simple to use and convenient for an easy hands-free communication - Compatible with any Bluetooth® enabled mobile device - Ultra lightweight headset - Headset uses Bluetooth® 2.0 technology - Auto "End" calls when headset is placed on the - Auto "Power Off" when no Bluetooth® signal - Auto "Power On" and connects to your mobile phone when engine starts - Auto answer incoming call when headset is removed - VOIP compatible - Pairs with up to 8 devices - Multiple charging options >>>
View the product on winplus.net Winplus Europe Limited
BATTERY CHARGER - BLUE POWER CHARGER IP 67

BATTERY CHARGER - BLUE POWER CHARGER IP 67
Blue Power Charger IP 67 Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Blue Power charger. The casing is made of cast aluminium and the electronics are moulded in resin. Blue Power Charger IP 20 Universal input: 90-265 VAC or 90-350 VDC: The charger will operate on whatever supply is available. Adaptive 4-stage charge characteristic: bulk – absorption – float – storage The Blue Power charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. >>>
View the product on victronenergy.com Victron Energy B.V.
BATTERY CHARGERS - CPS2 12V

BATTERY CHARGERS - CPS2 12V
Cristec NEW CPS2 12V DC switch-mode, filter controlled, battery chargers available with 16, 25, 40, 60 or 80 amp outputs.Light, ultra-compact & silent, CDS2 chargers offer fully managed battery charging in minimum time thanks to their 3 charging modes: Boost, Absorption & Floating. They can also be used as a stabilized power supply.Choice of charge rates, with or without Boost phase by means of internal switch. Timeable Boost activated automatically according to battery charge state. >>>
View the product on mantsbrite.com Mantsbrite
BCL-1206 72 WATT BATTERY CHARGER IP65 SEALED ~ WATERPROOF

BCL-1206 72 WATT BATTERY CHARGER IP65 SEALED ~ WATERPROOF
The battery charger BCL-1206 is a completely new battery charger which uses the latest technology. This has made it possible to produce a very powerful yet small battery charger which gives regulated and filtered charging voltage. The charger can be connected to a battery for a long time without overcharging or damaging the battery. The charging cycle initiates at high voltage 14.4 V for about 20 hours. After this the charger switches to maintenance charging at 13.6 V. If the charging current during high voltage charging reaches below 0.6 A it automatically switches to maintenance charging. Compact 80 x 125 x 35 mm (W x L x H) High Efficiency Light Weight 900 g Shockproof Waterproof Charging is always controlled Also for 115 V input >>>
View the product on vxipower.com VxI Power
CHARGER - 12V 17A BLUE POWER BATTERY CHARGER

CHARGER - 12V 17A BLUE POWER BATTERY CHARGER
Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Power charger.The casing is made of cast aluminium and the electronics are moulded in resin. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60¬C, but the Blue Power charger will not fail.Automatic three stage charging Once the absorption voltage has been reached, the Blue Power charger will switch to float charge after the charge current has reduced to a low break point current (see specifications), or after a 20 hour absorption period. The battery is therefore effectively protected against overcharging and can remain permanently connected to the charger. >>>
View the product on kuranda.co.uk Kuranda Marine
IN-CAR CHARGER - MOTOROLA A925, ROKR E1, V66 AND OTHER

IN-CAR CHARGER - MOTOROLA A925, ROKR E1, V66 AND OTHER
In-Car Charger - Motorola A925, ROKR E1, V66 and Other [P-043] In Stock Plugs straight into your cigarette lighter socket Reverse polarity protected (cuts off if a short circuit occurs) Fuse protected Features an LED power indicator Robust and compact design Rubberised curly cord 12/24 volts compatible CE approved with 1 year Manufacturer's Guarantee Description This Motorola Car Charger is great if you want to charge your mobile phone on the move. It plugs straight into your cigarette lighter socket and features an LED power indicator to show that the power is on. Specification Item: P-043 Compatibility: Motorola A1000, A6188, A835, A920, A925, C300, C975, C980, E1000, E398, E550, MPx, MPx220, ROKR E1, ROKR E2, Timeport T280, Timeport T280i, T720, T720i, V1050, V120, V300, V400, V500, V525, V535, V545, V547, V550, V60, V600, V620, V635, V66, V66i, V690, V70, V80, V975, V980 >>>
View the product on porta-charge.co.uk Porta-Charge.co.uk - Psp and ipod Accessories
BATTERY CHARGER - DOLPHIN (ON-BOARD)

BATTERY CHARGER - DOLPHIN (ON-BOARD)
Our most popular battery charger range. Dolphin are manuafctured in the EU to a very high quality but are very competitively priced. Each unit features a corrosion resistant casing and coated circuit board.They offer all the features and benefits above and also "Adaptive" charging on larger units. They are suitable for both lesiure and professional use, have six charge programs for different battery types (larger units) and an equalisation mode for desulphation. >>>
View the product on merlinequipment.com Merlin Equipment
BATTERY MANAGEMENT - NEW ADVERC OSCA-P RANGE

BATTERY MANAGEMENT - NEW ADVERC OSCA-P RANGE
DC-DC 12 or 24 VOLT BATTERY CHARGERS.OSCA-P: A range of DC-DC battery chargers with an excellent track record and which has been adopted by many of the leading OEM’s and the MOD.No mains power is required. The ‘recipient’ battery takes its charge from the ‘host’ or ‘donor’ battery, when it is being charged from another source. The donor battery is protected from going flat and the recipient battery cannot be overcharged. >>>
View the product on adverc.co.uk Adverc BM Ltd
CHARGER - MODEL 2520 PAM

CHARGER - MODEL 2520 PAM
The 2520 PAM Tester/Charger has been designed to be a highly versatile and invaluable operator tool. It is used to test and charge AAE beacons, and test those from other manufacturers. It operates in the MF and LF frequency band.The multi-function deck set is used toCheck transponders, responders and pingers prior to use, avoiding any downtimeOperate all AAE Acoustic Release Beacons, and obtain status telemetry informationOperate as range and relocation meter with navigation transponders, depth transponders and pingersCharge all AAE 900 Series beacons >>>
View the product on appliedacoustics.com Applied Acoustic Engineering Ltd
BATTERY CHARGERS - #24220

BATTERY CHARGERS - #24220
Description: BATCH BATTERY CHARGER 115 12 VOLT 15 AMPS MZ Electronic: MZ Electronic was formed in Monza in 1993 as a factory working in electric and electronic nautical accessories. From that moment on, we have always had an inclination to research and development, which has made us become the strong and established supplier of battery chargers today. We produce a wide range of products, which have been studied by our technical department in order to satisfy the various demands of the market. All of our products have been severely tested and controlled by means of the most sophisticated technologies in order to assure their correct functioning.Innovation, reliability and design are the foundations of our corporate development strategy. It is no coincidence that MZ Electronic has business relationships and partnerships with many established companies in the marine market. Description: Our electronic battery chargers (with 3 steps charging mode) feature reduced size and weight with high performance characteristics. They ensure fast and accurate charging and a constant and general control of the conditions of the connected batteries. They also provide support in the event of elevated loads and hold charging when the batteries are not in use. All the operative phases of the battery charger can be instantly checked thanks to the LEDs on the cover and the handy bridge repeater. Specification: Max Output Current: 15 A Number Of Outputs: 2 Supply Voltage: 230V, -10% + 15% Frequency: 50-60Hz +/- 5Hz Charge Absorption Voltage at 25°C: 13.8V Charge Float Voltage at 25°C: 13.20V Max Absorption 230Vac: 1.4A Cooling: Forced With Controlled Fan Dimensions (LxHxD): 190 x 275 x 95mm Weight: 1.7 Kg >>>
View the product on ecsmith.com EC Smith & Sons (Marine Factors) Ltd
FUEL CELL AUTOMATIC BATTERY CHARGER

FUEL CELL AUTOMATIC BATTERY CHARGER
The ABC is a 100W portable fuel cell system that is easy to carry and use anywhere, even underground. The ABC is produces virtually no toxic emissions or noise. It is available in two different AC voltages; either 110v or 230v, and each variant has both a 12vdc output and a USB charging port. This system can be used to power small electrical devices such as iPods or mobile phones or to simply recharge any battery. It also features a frost sensor which enables use in sub-zero conditions. The ABC is powered by hydrogen gas which can be supplied in two ways: either using a refillable canister mounted within the product or from a normal hydrogen cylinder, available from compressed gas suppliers, which can be connected externally. The ABC has a serial port which can be used for system diagnostics, statistics and fuel level reporting. >>>
View the product on voller.com Voller
BATTERY CHARGERS CHLORIDE S711

BATTERY CHARGERS CHLORIDE S711
Battery Chargers for the Electrical Transportation Grid S711 Battery chargers are power protection solutions designed for the most specific Direct Current needs of the Electrical Transportation grid. Specifically adapted to protect control systems and telecommunication systems in EDF substations, the S711 battery charger is the answer to the S711 EDF specification issued in February 2000. Offering a 48V DC or a 125V DC output voltage, these chargers are compatible with Lead Acid or Sealed Lead Acid batteries. >>>
View the product on chloridepower.com Chloride Power Protection
AUTOMATIC BATTERY CHARGER - BC-AUTO

AUTOMATIC BATTERY CHARGER - BC-AUTO
BC-AUTO Automatic Battery Charger Description The BC-AUTO is suitable for charging 12V lead acid batteries in the range of around 35 to 70AH. The unit can be fitted to float charge the battery and will automatically turn off the charging current when the battery reaches approx. 14V and will start charging when the battery volume falls to about 12.8V. This avoids overcharging or gassing the battery and compensates for spontaneous discharge. >>>
View the product on etps.co.uk ET Power Systems Ltd
MOTOR-INTEGRATED FEEDTHROUGHS

MOTOR-INTEGRATED FEEDTHROUGHS
FerroDrives are offered with hollow or solid shafts in sizes up to 2" (50mm). Two different versions are available - a basic motorized spindle which uses a standard controller and Hall effect sensors for simple velocity control (within 2%), and a high precision version which features an encoder and advanced digital controller for extremely accurate speed and position control (within 0.01% or better). >>>
View the product on ferrotec.com FerroTec
DC SUPPLY SYSTEMS

DC SUPPLY SYSTEMS
GUTOR's DC supply systems (battery chargers) consists of a thyristor- controlled 6-puls/12puls rectifier. The systems are available with or without batteries. The DC supply systems can be modified for different voltages (24 - 220 VDC) and output ratings (25 - 1200A). Our customers can also select from a range of optional features. Other system features are: Man - Machine Interface (MMI) Advanced Battery Management (ABM) Seismic approved (1E) >>>
View the product on gutor.com GUTOR Electronic LLC
ON-BOARD BATTERY CHARGERS FOR 24 V - SEVCON - HF

ON-BOARD BATTERY CHARGERS FOR 24 V - SEVCON - HF
These high frequency battery chargers use an efficient 3-stage charge curve designed to efficiently charge a vehicle battery whatever the status of its residual charge. For curve please click here. Connected permanently to the battery and motor speed controller, the unit allows “opportunity” charging while the machine is not in use. Driving may be inhibited when vehicle is on charge using the integral relay in series with the vehicle key switch >>>
View the product on sevcon.com Sevcon
WIDE RANGE BATTERY CHARGERS - BCM NIMH

WIDE RANGE BATTERY CHARGERS - BCM NIMH
• 100-250 VAC • In Case IEC 320 with Ground • LED Indicators • Charges Nickel Metal Hydride Batteries • Optimizes Battery Life • Meets Safety Agency Requirements • Complies with EMI-RFI Regulations • Impact Resistant Polycarbonate Enclosure • Private Label Marking Available • 3 Year Warranty • Modified and Custom Designs Also Available Input Voltage 100 - 250 VAC -10%, +6% Line Frequency 47 - 63 Hz Current 0.5 max at 120 VAC input Protection Internal primary current fuse Inrush limiting Short Circuit Protection Electrical Topology Switching - DC battery charger Dielectric Withstand 3000 VAC, 4242 VDC primary - secondary EMI Complies with EMC Directives CE CE Compliant MTBF 100,000 calculated hours Protection Output current limiting, Short circuit protection Safety Approvals Agency Listings cULus 60950; TUV EN60950 Environmental Operating Temperature 0º – 50º C with no derating Storage Temperature -30º to +85º C Relative Humidity 5% to 95% non-condensing 0-10,000 feet Altitude 0-10,000 feet Cooling Convectional - non vented case Mechanical Case and Dimensions 4.22L x 2.60W x 1.51H (in) 107.2L x 66.04W x 38.35H (mm) Case Material 94V0 polycarbonate; black is standard color; other colors available - extra charges may apply Weight 8 ounces, 210 grams (excluding cord) Cords and Connectors 6 ft., 3 conductor, 18 AWG, Ault #21 connector (thermistor is in pack). Other connectors are also available. >>>
View the product on slpower.com SL Power Electronics Groupe - SL Industries
BATTERY CHARGERS

BATTERY CHARGERS
•Robust ABS plastic case with LED light indicators •Battery test function •Can charge different battery types at the same time •10995/01 Trickle Charger holds four circular batteries & 1 x PP3 9 volt block battery •10995/02 has selectable fast or trickle charge and facilitates four circular batteries and 2 x PP3 9 volt block batteries •To prevent overcharging 10995/02 will switch to trickle charge after two hours of fast charge •Supplied with a 1.5 metre mains cable and instructions for use >>>
View the product on yorlab.co.uk Yorlab
SOLAR PANELS: HIP 215 NHE5

SOLAR PANELS: HIP 215 NHE5
SANYO HIT* solar cells are hybrids, made of thin mono crystal silicon surrounded by ultra-thin amorphous silicon layers. As temperatures rise, SANYO HIT solar panels produce more electricity (kWh) than conventional crystalline silicon solar panels at the same temperature. HIT solar panels have a black anodized aluminum frame, come pre-equipped with a touch-safe and electrically-safe junction box, lead wires, and plug-n-play connectors.Features:SANYO HIT solar panels are 100% emission free, have no moving parts and produce no noise. The panels are manufactured to UL 1703 safety standards and resist wind, fire, and hail. Anti-reflective coatings maximize sunlight absorption. The small size of the panels helps to save space and achieve maximum power within a limited amount of roof space. The panels weigh less than 31 pounds. A unique frame helps installers save space, installation time, and money for structure support materials. >>>
View the product on solarcentury.co.uk Solar Century
BATTERY LOADER - MONOBLOCS - XFC BLOCS

BATTERY LOADER - MONOBLOCS - XFC BLOCS
These pure lead maintenance free blocs deliver superior cycling performance (up to 1,200 cycles at 60% DOD) and very rapid recharge (less than 3 hours at 60% DOD with associated HF charger). XFC offers complete freedom of use without the need for extended recharge periods and allowing the user to 'opportunity charge' giving near continuous machine availability : recharge whenever it is possible (during breaks, at the end of the shift). A step forward in battery technology - gives a true 'daytime cleaning' capability in floorcare and rapid cycling in all other applications. >>>
View the product on enersys-hawker.com/french/index_ad.asp?lang=f ENERSYS, HAWKER




  Search    
 
 
 
Search
See all of the sector's products : Electricity/Electronics