Chargers - All suppliers - Loaders - loader battery - loader exactly - loader battery - loader - loader battery - load battery - charge exactly - load battery - load battery - l
Search   


See all sector categories "Electricity/Electronics"

View associated products
Chargeurs électriques (translation in progress)
Chargers
Chargeurs de voyage (translation in progress)
Chargeurs de batteries d'appareils bureautiques (translation in progress)
Chargeurs systèmes de navigation embarqués (translation in progress)
Chargeurs de piles (translation in progress)
Solar chargers
Accus (translation in progress)
Batteries (translation in progress)


Chargers :

87 products Flux RSS
YD-V1 + DIRECT CHARGER

YD-V1 + DIRECT CHARGER

Specifications: - Bluetooth® Specification: Version 2.0 - Weight: 0.25 oz (7 grams) - Approval Obtained: BQB, CE, FCC, IC, C-TICK - Bluetooth® Chip/Class: CSR Chip Bluecore 4/Class II - Profiles Supported: HSP, HF - Frequency Band: 2.402 MHz ~ 2.480 MHz - RF Channels: 79 charging cradle - Operating Range: 33 Feet (10 meters) - Operation Voltage: 3.7VDC is detected and/or not being used for more than one hour - Power Consumption In Talking Mode: 13 mA - Battery: Li-ion Battery - Talk Time: 6 Hours - Standby Time: 105 Hours from the charging cradle - Audio: (Mic) -42 +/-3dB @ 1KHz (Speaker) 32 ohm, 100 +/-dB @ 1KHz - Clear Voice Quality: 10 Level Volume Controls - Operation Temperature: 20°C to 60°C - Storage Temperature: 20°C to 60°C Features: - Simple to use and convenient for an easy hands-free communication - Compatible with any Bluetooth® enabled mobile device - Ultra lightweight headset - Headset uses Bluetooth® 2.0 technology - Auto "End" calls when headset is placed on the - Auto "Power Off" when no Bluetooth® signal - Auto "Power On" and connects to your mobile phone when engine starts - Auto answer incoming call when headset is removed - VOIP compatible - Pairs with up to 8 devices - Multiple charging options >>>
View the product on winplus.net Winplus Europe Limited
BATTERY CHARGER - BLUE POWER CHARGER IP 67

BATTERY CHARGER - BLUE POWER CHARGER IP 67

Blue Power Charger IP 67 Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Blue Power charger. The casing is made of cast aluminium and the electronics are moulded in resin. Blue Power Charger IP 20 Universal input: 90-265 VAC or 90-350 VDC: The charger will operate on whatever supply is available. Adaptive 4-stage charge characteristic: bulk – absorption – float – storage The Blue Power charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. >>>
View the product on victronenergy.com Victron Energy B.V.
BCL-1206 72 WATT BATTERY CHARGER IP65 SEALED ~ WATERPROOF

BCL-1206 72 WATT BATTERY CHARGER IP65 SEALED ~ WATERPROOF

The battery charger BCL-1206 is a completely new battery charger which uses the latest technology. This has made it possible to produce a very powerful yet small battery charger which gives regulated and filtered charging voltage. The charger can be connected to a battery for a long time without overcharging or damaging the battery. The charging cycle initiates at high voltage 14.4 V for about 20 hours. After this the charger switches to maintenance charging at 13.6 V. If the charging current during high voltage charging reaches below 0.6 A it automatically switches to maintenance charging. Compact 80 x 125 x 35 mm (W x L x H) High Efficiency Light Weight 900 g Shockproof Waterproof Charging is always controlled Also for 115 V input >>>
View the product on vxipower.com VxI Power
CHARGER - 12V 17A BLUE POWER BATTERY CHARGER

CHARGER - 12V 17A BLUE POWER BATTERY CHARGER

Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Power charger.The casing is made of cast aluminium and the electronics are moulded in resin. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60¬C, but the Blue Power charger will not fail.Automatic three stage charging Once the absorption voltage has been reached, the Blue Power charger will switch to float charge after the charge current has reduced to a low break point current (see specifications), or after a 20 hour absorption period. The battery is therefore effectively protected against overcharging and can remain permanently connected to the charger. >>>
View the product on kuranda.co.uk Kuranda Marine
MAINS CHARGER - SHARP GX25, GX30 AND OTHER

MAINS CHARGER - SHARP GX25, GX30 AND OTHER

Mains Charger - Sharp GX25, GX30 and Other [P-133] In Stock 3 - PIN mains charger for your Sharp mobile phone Lightweight and robust Features an LED power indicator Input: 100-240v AC (making it ideal for travel) CE approved with 1 year Manufacturer's Guarantee Description This Sharp Mains Charger is great if you have lost your original charger. It's also good to keep as a spare for the office or have as a general backup. Specification Item: P-133 Compatibility: Sharp 550SH, 703, 770SH, 802, 809, 902, 903, GX15, GX17, GX25, GX29, GX30, GX30i, TM100 >>>
View the product on porta-charge.co.uk Porta-Charge.co.uk - Psp and ipod Accessories
BATTERY MANAGEMENT - NEW ADVERC OSCA-P RANGE

BATTERY MANAGEMENT - NEW ADVERC OSCA-P RANGE

DC-DC 12 or 24 VOLT BATTERY CHARGERS.OSCA-P: A range of DC-DC battery chargers with an excellent track record and which has been adopted by many of the leading OEM’s and the MOD.No mains power is required. The ‘recipient’ battery takes its charge from the ‘host’ or ‘donor’ battery, when it is being charged from another source. The donor battery is protected from going flat and the recipient battery cannot be overcharged. >>>
View the product on adverc.co.uk Adverc BM Ltd
CHARGER - MODEL 2520 PAM

CHARGER - MODEL 2520 PAM

The 2520 PAM Tester/Charger has been designed to be a highly versatile and invaluable operator tool. It is used to test and charge AAE beacons, and test those from other manufacturers. It operates in the MF and LF frequency band.The multi-function deck set is used toCheck transponders, responders and pingers prior to use, avoiding any downtimeOperate all AAE Acoustic Release Beacons, and obtain status telemetry informationOperate as range and relocation meter with navigation transponders, depth transponders and pingersCharge all AAE 900 Series beacons >>>
View the product on appliedacoustics.com Applied Acoustic Engineering Ltd
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Electricity/Electronics