Chains and accessories: suppliers, wholesalers and manufacturers on Hellopro
Search   


Chains and accessories :

97 products
Select the category
    Selection of 63 products among 97
    F-CLASS CHAIN

    F-CLASS CHAIN
    F-Class Chain / The NEW Generation of Conveyor Chains This unique chain will run in existing systems without major changes and will replace all ordinary chains! Advantages: * F-Class Chain Typ C: up to 50% higher Power * F-Class Chain Typ A: up to 100% higher Power * F-Class Chain Typ W: less wear of the deck plate * higher output due to bigger cross-section * Standard sprockets can be used * F-Class Chains can be supplied with Short Studs against kinking * To connect the chains our well established Theipa flat connectors as well as our optimized Theipa block connectors are availables >>>
    View the product on jdt.de J.D.T.
    SILENT CHAIN - RPV™

    SILENT CHAIN - RPV™
    RPV is high performance inverted tooth chain, specifically designed to meet or exceed the capability of all other high performance chains. Capable of speeds in excess of 7000 fpm and loads exceeding 3000 hp, RPV's strength and load capacity comes from improved link and sprocket designs. Links are designed to minimize stress concentrations and to increase the amount of steel in the line of chain pull. Innovative stamping methods maximize the amount of load bearing surface in each link and greatly reduce the rate of chain elongation during operation. All links are shot peened to improve fatigue strength and produce a uniform, high quality finish. >>>
    View the product on ramseychain.com Ramsey Products
    ROLLER CHAIN - A&S

    ROLLER CHAIN - A&S
    A&S roller chain has long been recognised for its high quality and affordable reliability. It has earned a strong reputation for its excellent wear resistance, high fatigue resistance and durability and these factors have helped A&S become the most widely used chain brand in Europe. * Solid extruded bush * Solid extruded roller * Wider waisted plates * Hardened and shot-peened plates * Comprehensive European (BS) and ANSI standard ranges * Wide range of attachments available * Choice of lubricant to meet customer’s requirements >>>
    View the product on renold.com RENOLD Groupe - Renold
    UNI 881 SLAT TOP CHAIN - STEEL

    UNI 881 SLAT TOP CHAIN - STEEL
    Uni SS881 (430) is suitable for soft drinks, bottling plants, breweries and uni SS2881 (304) for the wine industry. Chain lubrication is recommended. The chains can be supplied with a ground surface for widths up to 114.3 mm (4.50 in.): Type SSX. The chain is supplied with bevels to retain the chain in the curved conveyor sections. Please note, the R-type has a minimum turn radius of 200 mm (7.87 in.). This space-saving chain is often used with small diameter turn discs with ball bearings. >>>
    View the product on unichains.dk uni-chains
    CATERPILLAR DRIVE CHAIN

    CATERPILLAR DRIVE CHAIN
    Caterpillar Drive Chains are essential in driving drop forged chain conveyors. Drives, Inc. USA Caterpillar Drive Chains provide high fatigue life and are designed to perform flawlessly with forged rivetless chains. Drives, Inc. USA Caterpillar Drive Chains feature all ballized plates to ensure maximum bearing area for optimum press fits. This improves fatigue life and working loads. We use wide waist link plates with maximized ball heights to improve stress distribution that also increases fatigue strength and reduces vibration. The use of through hardened pins that are micro ground and shotpeened provides maximum pin to bushing surface contact for extended wear and protection from any unpredictable overload. Hardened hook cotters* are used to resist shearing and hold their place in the most rigorous of applications. Our one-piece forged drive dog is induction hardened in the chain contact bearing area for wear resistance. The balance of the drive dog is through hardened for strength and durability. The entire assembly is designed to operate in combination with the drop forged rivetless chain. >>>
    View the product on drivesinc.com Drives Incorporated
    SILENT CHAIN - 3/16” PITCH SC

    SILENT CHAIN - 3/16” PITCH SC
    Ramsey 3/16" pitch chain is manufactured to ASME standard dimensions and will operate on standard sprockets. Chains are made entirely of 304 stainless steel and are available in side guide or center guide assemblies, depending on chain width. Consult the table below for information on the most common sizes. note: The power capacity of stainless steel chains is less than comparable width carbon steel chains. >>>
    View the product on ramseychain.com Ramsey Products
    RENOLD SYNO PC CHAIN

    RENOLD SYNO PC CHAIN
    Renold has added to its impressive Syno range of chain for applications where lubrication is either difficult or impractical. The latest element is the introduction of a poly-steel chain, Renold Syno PC chain, comprising a polymer inner link and stainless steel pins and outer plates. This construction also means the chain is corrosion resistant, light weight and versatile. Attachments can be fitted to the outer plates if required. * No lubrication required * Can operate in wet conditions, even submerged * Lightweight construction * Attachments can be added >>>
    View the product on renold.com RENOLD Groupe - Renold
    UNI 881 TAB SLAT TOP CHAIN - STEEL

    UNI 881 TAB SLAT TOP CHAIN - STEEL
    Uni SS881 TAB (430) is suitable for soft drinks breweries, bottling plants and uni SS2881 TAB (304) for the wine industry. Chain lubrication is recommended. uni S881 TAB (S1045) is used in automotive and material handling industries. The chains can be supplied with ground surface for widths up to 114.3 mm (4.50 in.): Type SSX. The chain is supplied with welded tabs to retain the chain in the curved conveyor sections. Please note, the R-type has a minimum turn radius of 200 mm (7.87 in.). This space-saving chain is often used with small diameter turn discs with ball bearings. >>>
    View the product on unichains.dk uni-chains
    SILENT CHAIN - RAMPOWER™

    SILENT CHAIN - RAMPOWER™
    RP or RamPower series silent chain was designed to operate on sprockets manufactured with an ASME Standard tooth profile. Available exclusively through Ramsey, RamPower offers twice the power capacity of SC series chains and speeds up to 7,000 fpm. RamPower has been successfully employed in applications transmitting up to 2,500 hp and is often preferred where high loads and speeds must be accommodated in a small amount of space. The increased load carrying capacity of RamPower is a result of improved link and pin designs. Ramsey engineers re-designed the standard SC link shape to reduce stress concentrations, improve fatigue life, and increase link tensile strength. Innovative stamping methods were also employed to maximize the amount of bearing surface area in each link. >>>
    View the product on ramseychain.com Ramsey Products
    RENOLD SYNO NP CHAIN

    RENOLD SYNO NP CHAIN
    * For use in hygiene-sensitive applications * Food industry-approved lubricant within the sintered bush * Food industry-appropriate roller coating - a unique feature on any roller chain. * Available in boxed 10-foot lengths from 06B to 24B and ANSI 40 to ANSI 100 * Simplex and duplex * Standard pin diameter * Renold Syno Nickel Plated chain is dimensionally interchangeable with standard chain * It is therefore compatible with standard sprockets >>>
    View the product on renold.com RENOLD Groupe - Renold
    UNI 821 SLAT TOP CHAIN - PLASTIC

    UNI 821 SLAT TOP CHAIN - PLASTIC
    The main application is for conveying various packaged food products and containers. The uni 821 chain is considerably stronger than the uni 820/831 chains and it is available in widths up to 304.8 mm (12.00 in.). The link thickness is 5.0 mm (0.20 in.) the same as uni 831 and uni 882 series, so they can be used together with no height difference. The links overlap, so there is no space between the links. >>>
    View the product on unichains.dk uni-chains
    SILENT CHAIN - DUPLEX & RAMFLEX ™

    SILENT CHAIN - DUPLEX & RAMFLEX ™
    Duplex chains are designed to engage and drive sprockets from both sides of the chain. Ramsey manufactures three different styles of duplex silent chain; each has unique features and advantages: Rampower Duplex Series Rampower duplex, also known as RP duplex, provides approximately two times the power capacity of standard SC duplex chain. RP duplex is often well suited for new or replacement applications where power or speed requirements exceed the capability of SC duplex chain. >>>
    View the product on ramseychain.com Ramsey Products
    RENOLD SYNO SS CHAIN

    RENOLD SYNO SS CHAIN
    It is suitable for use in such situations as food packaging and preparation, pharmaceuticals, canning and also textiles and clothing. With these features, this is an unbeatable choice for the most unforgiving of environments. Another example of Renold technology and experience being put to the test and delivering results. * Brings together stainless steel chain corrosion resistance with Syno lubrication performance * Conventional sintered bush construction * Available in boxed 10-foot lengths from 08B to 16B, simplex and duplex * High wear resistance >>>
    View the product on renold.com RENOLD Groupe - Renold
    ROLLER CHAIN - STAINLESS STEEL

    ROLLER CHAIN - STAINLESS STEEL
    Renold Stainless Steel chain is made for high grades of austenitic rust-proof steel. These perform extremely well in environments that are acidic, alkaline, where direct contact with food is a consideration, where the chain will be exposed to water, and for very high or very low temperature locations ( -40° to +400°C ) where resistance to corrosion is a requirement. * All components made from austenitic rust-proof steel * All components receive surface finishing to remove stress raisers * Lubrication that improves wear performance * Tensile strength is approximately 65% that of standard carbon steel chain >>>
    View the product on renold.com RENOLD Groupe - Renold
    ROLLER CHAIN - NICKEL PLATED

    ROLLER CHAIN - NICKEL PLATED
    Renold Nickel Plated chain delivers excellent corrosion protection. Ideal for applications such as bottling where spillages can lead to corrosion the specification for this chain is designed to optimise its performance. Every modification is made to push the wear and fatigue resistance to the maximum as well as delivering corrosion resistance. * Hexavalent chrome free * 400 hours corrosion protection during salt spray tests to DIN 50021 * Cold extruded, solid bush and roller delivering maximum Renold performance * Plates and rollers shot peened to our exact specifications * Wear and fatigue resistance that delivers maximum working life * Lubrication that improves wear performance * Tensile strength is approximately 85% that of standard carbon steel chain >>>
    View the product on renold.com RENOLD Groupe - Renold
    UNI 8811 SLAT TOP CHAIN - STEEL

    UNI 8811 SLAT TOP CHAIN - STEEL
    The main application is for conveying glass bottles in curves. uni SS8811 (430) e.g. is suitable for soft drinks breweries, bottling plants and uni SS28811 (304) for the wine industry. Chain lubrication must be applied. The hinge-eye design on uni 8811 gives a more closed surface on the chain compared to uni 881 chain, leading to steadier conveying of the products. The chains can be supplied with ground surface for widths up to 114.3 mm (4.50 in.): Type SSX. The chain is supplied with bevels to retain the chain in the curved conveyor sections. >>>
    View the product on unichains.dk uni-chains
    ROLLER CHAIN - HYDRO-SERVICE

    ROLLER CHAIN - HYDRO-SERVICE
    Renold Hydro-Service chain delivers superior corrosion resistance, lasting as much as 30 times longer than standard carbon steel in applications that have to deal with water or salt spray. It is ideal for wash-down environments. Hydro-Service chain is also more economical, and stronger, than stainless steel. * Superior corrosion resistance * Last as much as 30 times longer than standard carbon steel * Hexavalent chrome free * 350 hours corrosion protection during salt spray tests to DIN 50021 * Cold extruded, solid bush and roller delivering maximum Renold performance * Plates and rollers shot peened to our exact specifications * Wear and fatigue resistance that delivers maximum working life * Lubrication that improves wear performance >>>
    View the product on renold.com RENOLD Groupe - Renold
    UNI 8811 TAB SLAT TOP CHAIN - STEEL

    UNI 8811 TAB SLAT TOP CHAIN - STEEL
    The main application is for conveying glass bottles in curves. uni SS8811 TAB (430) e.g. is suitable for soft drinks breweries, bottling plants and uni SS28811 TAB (304) for the wine industry. Chain lubrication must be applied. The hinge-eye design on uni 8811 TAB gives a more closed surface on the chain compared to uni 881, leading to steadier conveying of the products. The chain is supplied with welded tabs to retain the chain in the curved conveyor sections. The chains can be supplied with ground surface for widths up to 114.3 mm (4.50 in.): Type SSX. >>>
    View the product on unichains.dk uni-chains
    ROLLER CHAIN - RENOLD SYNERGY

    ROLLER CHAIN - RENOLD SYNERGY
    * Precision blanked profile optimises stress distribution * Strict control of steel specification (including trace elements) to ensure very consistent heat treatment results * Triple punch holing techniques maximises resistance to crack propagation and ensures controlled positional location of pin and bush for even wear * Special coating gives improved corrosion and light acid resistance * Connecting link plates are specially treated to ensure the same fatigue performance as the overall chain >>>
    View the product on renold.com RENOLD Groupe - Renold
    ROLLER CHAIN - ZINC PLATED

    ROLLER CHAIN - ZINC PLATED
    This is a new zinc plating from Renold. Ideal for applications susceptible to light corrosion, the new plating has one consistent appearance, replacing the yellow and blue chromated versions previously available and delivering the same high levels of corrosion resistance. * Hexavalent chrome free * 250 hours corrosion protection during salt spray tests to DIN 50021 * Cold extruded, solid bush and roller delivering maximum Renold performance * Plates and rollers shot peened to our exact specifications * Wear and fatigue resistance that delivers maximum working life * Lubrication that improves wear performance * Tensile strength is approximately 85% that of standard carbon steel chain >>>
    View the product on renold.com RENOLD Groupe - Renold
    UNI 881 SUPER FLEX SLAT TOP CHAIN - STEEL

    UNI 881 SUPER FLEX SLAT TOP CHAIN - STEEL
    The main application is for conveying glass bottles. uni 881 Super Flex chain has special designed angled inverted tabs on the underside. The SFL shoe ensures that the chain is always held totally flat against the wearstrips in curves. Its design also reduces vibrations. Therefore the problems normally associated with conveying unstable bottles and containers are minimized. Super Flex chains can be removed from the carry wearstrips (straights and curves) without the use of tools. Please note the R-type has a minimum turn radius of 200 mm (7.87 in.). This space-saving chain is often used with small diameter turn discs with ball bearings. >>>
    View the product on unichains.dk uni-chains
    UNI 8811 SUPER FLEX SLAT TOP CHAIN STEEL

    UNI 8811 SUPER FLEX SLAT TOP CHAIN STEEL
    The main application is for conveying glass bottles in curves. The hinge-eye design on uni 8811 Super Flex gives a more closed surface on the chain compared to the uni 881 Super Flex, leading to steadier conveying of the products. The Super Flex design of the tab on the chain ensures a horizontal level and also an elimination of vibrations, and therefore the problems normally assosiated with conveying of fragile products are minimized. uni 8811 Super Flex is well suited for installations where dirt in the tracks is a problem. Cleaning is easy. The chain is easy to install and remove - without the use of tools. >>>
    View the product on unichains.dk uni-chains
    ANTISEIZE TAPES

    ANTISEIZE TAPES
    These tapes are formulated to operate at high temperature [above 260 c ] when the ptfe depolymerises leaving a coating on the thread acting as a lubricant during disassembly. The tapes also coat and seal threads against corrosive liquids and gases . They also prevent fasteners from loosening during vibration, and can reduce torque by up to 5%. When applying the tape it is important that the tape be wound onto the threaded item in the opposite direction to mating part to prevent the tape being pushed off. >>>
    View the product on cobasuk.com/ Cobas UK Ltd
    GRIP CHAINS

    GRIP CHAINS
    Gripping, retracting, transporting soft foils 1. Problem/Initial situation Reliable feeding, transporting and positioning of thin-walled materials with a large area 2. iwis Solution iwis high performance chains with wear- and corrosion-resistant clamping elements. Registered patent. 3. Highlights * Optimally fed into the machine due to the unique swivelling technique of the gripper * Precise positioning of the material to be conveyed via reliable clamping * Chain and clamping element with corrosion protection as standard * Differing levels of spring force allow an extremely wide range of materials to be gripped gently * Provided with initial lubrication, approved for use in the food industry (standard) 4. Technical Features * Single or double chain 1/2 x 5/16 inches complying with DIN 8187-1/ ISO 606 * Gripper with 1 or 2 tips, special design on request * Retaining force is dependent on material conveyed and spring design - Differing number of coils and wire spring diameters available * The gripper opens by running against a control disc (e.g. chain wheel hub) which causes it to swivel out of the way to the outside 5. Industrial Applications * Packaging industry, especially foil packaging * Electronic industry and in the manufacturing of printed circuit boards * Feeding in thin-walled sheet metal, plastics and other hard materials * … and everywhere where plate and sheet materials are drawn in or off, transported or positioned, e.g. for punching, welding, filling, coating, cutting, stretching, shaping, sealing etc. >>>
    View the product on iwis.com IWIS
    CAM GUIDES

    CAM GUIDES
    Due to their specific requirements, cam guides are made from Material "S"®1000 black antistatic. This material shows high wear resistance and excellent slide properties for dry running. It is also chemically resistant, does not absorb moisture and runs quietly. Our cam guides for flat-top chains are available in two versions: a three-part dovetail design and a two-part tee profile. Standard cam guides are available in bends of 90º, 60º, 45º and 30º. Should our standard range not meet your demands, we will be glad to produce custom guides to your own specification. All cam guides are available with and without 100mm straight ends. Please indicate your preferred type by selecting the relevant part no. >>>
    View the product on murtfeldt.de Murtfeldt
    H-V AND SC INVERTED TOOTH CHAINS

    H-V AND SC INVERTED TOOTH CHAINS
    Morse H-V Chains provide the designer with a new concept for the transmission of high torques with high shaft speeds. Smooth running drives, with low noise level, transmit up to 4000 kW with shaft speeds up to 12,000 rpm. Proved in a wide range of applications from Automotive Transmissions, to flood control pumps. H-V Chain offers many design advantages over gears, roller chain or timing belt drives. >>>
    View the product on crossmorse.com Cross & Morse


    12Suivant >>Fin >
    Go to page


      Search    
     
     
     
    Search
    See all of the sector's products : Mechanics