Selection of 40 products among
74
LIGHTED PUSHBUTTON SWITCHES SERIES 600/80
Multi-Image
3/4" Square or 3/4” x 7/8" Rectangular
* Single Module,
Multi-Image Display
Design Saves Valuable
Panel Space
* Horizontal & Vertical Split Screen
Images
* Easy Snap-In
Installation,
Replaceable Lenses/Filters
* SPST - 6PDT Switching Functions
Ideal for a variety of applications where several switching functions or status indicators are
needed, the Series 600/800 provides remarkable display versatility and multi-lamp/LED redundancy.
These compact, low-profile switches can be specified for exacting requirements in both
switch function, versatility of lens and legend displays. For added flexibility, legends, filters, and
colors can be easily changed in the field.
Series 600 (3/4" square) and Series 800 (3/4" x 7/8" rectangular) units can be specified in singular
or multiple switch circuit functions from SPST to 6PDT, with momentary or alternate action
switching actions. Independent circuitry increases reliability and a unitized, insulated housing
assures proper insulation. Models may be specified with a choice of 2 or 4 lamps or LED’s. An
optional clear lens cover protects and enhances replaceable filters. Units snap-in from front of
panel with a low-profile flush bezel or dividing barriers. Hidden legends also available.
Specifications:
Ratings: 30 volts DC or 125 volts AC, 2.0A res., 0.5A ind.
Life: 100,000 cycles minimum
Weight: 0.8 oz. (23 g) (max.)
Operating Pressure: 2 lbs. + 1 lbs. (908g + 454g)
Plunger Travel: 0.187" (4.7mm) (approx.)
Terminals: EMC solder lug terminals. Accepts two
20 AWG wires. PC pins also available.
Pushbutton Lenses: See part number table.
Lamps: Lens accommodates two or four T 1-3/4 (5mm)
m.f.b. lamps or LED’s. P/N must be specified.
>>>
View the product on electromechcomp.com
Electro-Mech Components
PUSHBUTTONS
Pushbuttons are switching devices which close and open electrical circuits. Actuators and contact chambers of pushbuttons are always integrated into one product (as opposed to control units). The
"LUMOTAST" product families also include signal lamps, keylock and selector switches which are compatible with the pushbuttons in design and technology.
Illuminated pushbuttons, 8 mm range, mounting hole diameter 8 mm
LUMOTAST illuminated pushbutton range, mounting hole diameter 16,2 mm
LUMOTAST FK, with flat-ribbon cable connector
LUMOTAST 25, actuating area 25 x 25 mm
LUMOTAST 75, for up to 250V /4 A
Keylock switch, mounting hole diameter 16,2 mm
Other pushbuttons, mounting hole diameter 9,1 mm - 20,3 mm
>>>
View the product on rafi-france.fr
Rafi France
233V3 - PULSED DC CONTROLLER
The Model 233v3 Pulsed DC Controller has been designed to operate with the Series 200 range of ionisers for ESD applications. The 233v3 is light, compact and features lockable plug and socket
connectors for quick release. It also provides the option of Steady State DC (SSDC) output.
Features Benefits
Extended pulse rate/frequency range (0.5 to 20 Hz). Lower frequencies enable emitted ions to travel extended distances and thereby increase the effective range of static control. There is also greater flexibility in the positioning of bars.
Extended balance adjustment. Finer, more accurate adjustment of ion balance.
Through hole POT adjustment controls. Prevents inadvertent adjustment by operators after installation set up.
Integral air connections supplied as standard. Easy, tidy connection of air supply pipe(s).
Built in alarm circuit with auto shutdown. Detection of a fault in the ionisation system results in automatic shutdown, thereby preventing serious damage to the system.
Provision for remote alarm indicator and 24V supply (through 8-way DIN connector). Enables system installations to be monitored from remote locations. No additional external power supply is required to power remote indicators.
Provision for remote ON/OFF switching. Allows system to be operated from remote locations.
SSDC output option. Provides tight balance in applications where air flow is required (e.g. Model 243 ionising bar).
Light and compact. Minimum space requirement.
Technical Characteristics
Dimensions 94mm x 157mm x 35mm (h x w x d)
Weight 0.3Kg
Power 5W
Input Voltage 24V DC
Input Frequency 47 – 63Hz
Mains Input Via 2.5mm jack socket (centre positive)
Output Current 120µA
Output Frequency Adjustable between 0.5 and 20Hz
Alarm Relay Connection via 8-way DIN
Remote HV switch 3.5mm jack plug
Compressed air connection Via 6mm push-in fitting
Maximum Operating Temperature 60°C
>>>
View the product on meech.com
Meech International
LCT8100 LOCAL CONTROL TERMINAL
• For use with 8100 series
• Direct control of one or more of any of the Thales
HF or V/UHF SDR products
• Multi-function control - all selectable modes and
radio characteristics of each channel in
both
receive and transmit
• Diagnostics - monitors all SDR ancillary equipment
at product and system level
• Portability - LCT software available for third party
hardware
The LCT8100 Local Control Terminal utilizes
an intuitive Graphical User Interface (GUI),
which, together with the Local Audio Terminal
LAT8100, allows users to access, control and
manage the 8100 Series Software Defined
Radio (SDR) system.
SDR CONTROL
The Thales HF and V/UHF SDRs are the
primary components of an end-to-end
naval-based radio system. SDRs benefit from
the attributes of a versatile programmable and
configurable multi-channel exciter-receiver,
offering voice, data, messaging and e-mail
support. Based on the principle of open
system architecture, the design provides a
fully supported software environment enabling
ready adaptation or enhancement as
operational needs change.
To complement the advanced features of the
SDR, its internal Management Information
Base (MIB) can be accessed both from an
external Communication Management System
and from the highly capable SDR Local Control
Terminal LCT8100.
SOFTWARE
The LCT8100 software presents system
information in a clear and easy-to-read
manner. Related features are indicated by the
use of an intuitive user interface. Control and
diagnostic information are presented in
identical graphical styles.
The LCT application software can be readily
hosted on a customer’s preferred PC platform
running a Microsoft operating environment.
HARDWARE
The LCT8100 hardware is an industry
standard robust PC based platform. Optional
facilities include rack mounting on telescopic
runners for installation in a standard 19’’
cabinet. Combined with the Local Audio
Terminal LAT8100, this arrangement, when
retracted, occupies just 3U of cabinet height.
LOCAL AUDIO TERMINAL
The Local Audio Terminal LAT8100 is a unit
associated with the LCT8100 which provides
operator voice access to an SDR radio system
via the switched audio bus. Several LCTs can
be connected to the network depending on the
system topology.
Controllable parameters include:
Frequency • ALE
Mode • Radio silence
Channel • Waveform
Data rate • Gain
Software status Indicators include:
• BIT status • Power
• VSWR • Filters
• SNR • Scan
• Quality of service
CONFIGURATIONS
•LCT8101: 19” Cabinet
•LCT8102: Desk Top
• LCT8103: Notebook
MINIMUM HARDWARE REQUIREMENTS
CPU: 450Mhz
Memory (RAM): 256Mb
Hard Drive: 2Gb
Display: 15” @ 1024x768
XGA
Input Device: Keyboard / Trackball
Keyboard / Mouse
(optional)
Touchscreen
(optional)
Operating System: Microsoft®
Windows® 2000
Audio: LAT8101 19”
Cabinet
LAT8102 Desk Top
Temperature range: 0ºC to +55ºC
Humidity: 0-80%
PHYSICAL
Size (H x W x D)
• LCT8101 3.50 x 19.0 x 23.6
inches
(89 (2U) x 483 x 600
(max) mm)
• LAT8101 1.75 x 19.0 x 23.6
inches
(44.5 (1U) x 483 x 600
(max) mm)
Weight
• LCT8101 50.7 Ibs (23 kg )
• LAT8101 3.3 Ibs (1.5 kg)
Interfaces
• Standard Audio 600 Ohms 300-3400
Hz via LAT
Ethernet 10/100 Base-T
supporting SNMP & FTP
>>>
View the product on thales-communications.ltd.uk/signature_management.htm
THALES JOINT SYSTEMS
