Biometric locks and bolts - All suppliers - locks and bolts biometriques - Biometric lock - bolt biometrique - lock has fingerprints - lock and bolts biometriques - poignee biometrique door - po
Search   


See all sector categories "Safety"

View associated products


Biometric locks and bolts :

28 products Flux RSS
FS INTERLOCK

FS INTERLOCK

The FS Interlock is designed for use as a mechanical interlock for electricalswitchgear. The standard unit is fitted with a 9.5mm square x 22mm spigot that engages an actuating lever that can be used to operate an isolator or control access to a power distribution cubicle. The key is normally trapped within the lock assembly. Turning the key moves the spigot through a predetermined angular position (45?-360?) isolating the supply and releasing the key. The free key can then be transferred to an access interlock. >>>
View the product on castell.com Castell Iso-Lok
CENCON S2000 / 2000V ATM LOCK

CENCON S2000 / 2000V ATM LOCK

The World’s Leading ATM Lock Cencon System 2000® Features Three Modes of Operation Cencon locks can operate in any of three modes – one for the First Line Maintenance personnel (FLM Mode), one for cash replenisher or amoured service (Route Mode), and one for bank employees (Bank Mode). Each mode addresses the individual access needs for each category of user. Cencon System 2000 locks can be operated in any of these three modes – individually or in combination. One Time Combination A One TIme Combination is despatched each time access is required to a container controlled by a Cencon lock. Approvals: EN1300 B / VdS Class 2 Access Control A user needs both a One Time Combination and a Smart Key to access the lock. One Time Combination™ A One Time Combination is dispatched each time access is required to a container controlled by a Cencon lock. Smart Key™ An encrypted electronic key, used as a personal identifier, programming device or to transfer data between system components, which authenticates the audit trail. Close Seal™ The Close Seal acts as an electronic signature, stamping the date and time showing the lock was locked and secured and by whom. Duress When combined with a connection to an alarm system, entering a special Duress Combination will automatically send a silent alarm to your security facility while allowing the service technician entry to the lock. This helps ensure the safety of your personnel and the commodities you protect. Bolt Switch Cencon System 2000 comes standard with the capability to connect an alarm system to monitor the position of the lock bolt. Upon retraction or extension of the bolt, the signal can arm or disarm the alarm. Alarm Shunt Operation Cencon is compatible with most alarm systems. Entering the correct One Time Combination and presenting the assigned Smart Key deactivates the alarm. Audit Trail Cencon System 2000 records all lock activity up to 956 events, and permits easy downloading of the information via a Smart Key for generating detailed audit reports. Easy Retrofit Cencon has the same footprint as conventional mechanical combination locks, making the retrofit process easy. User Friendly Software Cencon System 2000 software allows you to control hundreds of containers with no special wiring. The Windows 95/98 point-and click interface makes it simple to install and use. >>>
View the product on kaba.co.uk Kaba (UK) Ltd
KEY CABINETS - SFC PERMIT TO WORK (PTW) SYSTEMS

KEY CABINETS - SFC PERMIT TO WORK (PTW) SYSTEMS

SFC Process Management Systems provide effective protection to clients’ investments in plant and equipment as well as improving employee safety and reducing the risk of damage to the environment.Having adopted a good key interlock control system, the next most important step is to apply a good key management system. For storage, ease of access and issue, SFC key cabinets provide all that is required. >>>
View the product on smithflowcontrol.com Smith Flow Control Ltd
SINGLE KEY ACCESS INTERLOCK

SINGLE KEY ACCESS INTERLOCK

The all stainless steel range of interlocks, are robust, durable, easy to install and proven in all types of hostile environment. Our range includes bolt and access interlocks, power control and isolation switches key exchange boxes, timers and motion control sensors. Single access interlocks, double access interlocks with personal key where full body access is required as well as single access interlocks with switches. >>>
View the product on integrated-safety-solutions.com Integrated Safety Solutions Ltd
FSAV PNEUMATIC SWITCH INTERLOCK

FSAV PNEUMATIC SWITCH INTERLOCK

The AV is a key driven pneumatic valve suitable for the isolation or switching of air to a maximum pressue of 10bar. The AV is supplied with either a 3 port or 5 port valve dependant on the application, and can be supplied in standard brass or stainless steel format, making it suitable for use in standard or harsh corrosive environments. The unit is supplied suitable for mounting into an existing panel or for surface mounting within its own IP65 rated enclosed. >>>
View the product on castell.com Castell Iso-Lok
KV 101 2.225.102 FLUSH FITTING DEADLOCK

KV 101 2.225.102 FLUSH FITTING DEADLOCK

Reversible for left or right hand doors (right hand version illustrated) and for drawers. Finish: Cylinder (KV 40.425.102) Brass dull nickel plated. Lock finished in Brass. Supplied with: • 2 KABA 20 keys • Rosette No 1008A.25.102 • Flat strike plate • Fixing screws • Key registration certificate KABA 20 Cylinder extensions: • 5, 10, 15, 20, 30, 40, 50 mm Rosettes for 22 mm cabinet lock cylinders. No 1008A.10.102 Screw-on rosette No 1008A.25.102 Push-on rosette Finish: • Brass dull nickel plated >>>
View the product on kaba.co.uk Kaba (UK) Ltd
LOCK OUT / TAG OUT - CHAINLOK

LOCK OUT / TAG OUT - CHAINLOK

The Chainlok is a unique device which combines the features of padlocks and interlocks.A durable body and chain made from 316 Stainless Steel makes it suitable for use in the most hostile environments. Chainlok comes with O.5m chain as standard (longer lengths available on request).Flag style 'Colour Aware Key' enables incorporation into interlock (key exchange) systems. Flip caps prevent ingress of foreign matter when key is removed. >>>
View the product on smithflowcontrol.com Smith Flow Control Ltd
K SINGLE BOLT INTERLOCK

K SINGLE BOLT INTERLOCK

The K single bolt interlock is designed for switchgear and valve interlocking applications. The unit comprises a heavy-duty lock body, lock centre and locking bolt. Under normal operating conditions, the key is free and the bolt extended to lock or release a cam or lever associated with the safe operation of switchgear isolators or valve assemblies. Inserting and turning the key retracts the bolt, thereby releasing the cam and trapping the key. An additional lock can be fitted to secure the cam in the closed position. >>>
View the product on castell.com Castell Iso-Lok
KV 1074 CABINET DEADLOCK

KV 1074 CABINET DEADLOCK

Reversible for left or right hand doors (right hand version illustrated) and for drawers Backset D: • 25 mm. Material / finish: • Cylinder – Brass dull nickel plated • Lockcase – Steel nickel plated Supplied with: • 2 Kaba 20 keys • Rosette No 1008A.25.102 • Strike plate • Fixing screws • Key registration certificate Kaba 20 Cylinder extensions: • 5, 10, 15, 20, 30, 40, 50 mm. >>>
View the product on kaba.co.uk Kaba (UK) Ltd
KC CLAW INTERLOCK

KC CLAW INTERLOCK

The KC Lock is a key operated mechanical bolt interlock suitable for the control electrical switchgear. The standard unit comes with a 16mm diameter bolt fitted with a claw, that is used to control the rotation or movement of operating handles or toggles of electrical switchgear. The bolt length and claw dimensions are variable to suit the particular requirement. The lock is manufactured in brass or stainless stell making it ideally suited to use in harsh or corrosive environments >>>
View the product on castell.com Castell Iso-Lok
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Safety