Selection of 31 products among
73
LIFTING BAG - SET 1/23 - 1.0 BAR (14.5 PSI)
Set Lifting Bags 1.0 bar (14.5 psi), Type 1/23, with fitting controller, consisting of:
2 Lifting Bags, Type 1/23, 1.0 bar/14.5 psi
1 Valise for Lifting Bag 1/23
1 Inflation hose 1.0 bar, 5 m,
yellow (14.5 psi,16.4 ft.)
1 Inflation hose 1.0 bar, 5 m, red (14.5 psi,16.4 ft.)
1 Dual fitting controller, 1.0 bar/14.5 psi
1 Pressure regulator, 200/300 bar (3,000/4,500 psi)
1 Set repair material 0.5/1.0 bar (7.25/14.5 psi)
Advantages
low pressure point loading of maximum 1000 g/cm²
constant lifting power over the complete lift
high degree of flexibility, they grip a load around the edges, then lift and press simultaneously
can be easily repaired when damaged
operating pressure of 0.1 bar to 1.0 bar (1.45 psi to 14.5 psi), regulated by a controller
side walls made of high quality aramide
life cycle with average use and correct storage: 15 - 20 years
patented vulcanized valve connections optimize air supply even in difficult applications
Safety
quality management according to DIN ISO 9001:2000
continuous product monitoring by the German testing authorities (TÜV Rheinland)
bursting pressure is 3 to 4 times the operating pressure
the testing pressure is 1.5 times the operating pressure
tear strengths according to DIN 53354 and ongoing tear strengths according to DIN 53363
rubber gripping properties according to DIN 53357
piercing strength according to DIN 53373, 6 mm objects, 110 mm tin can, 2740 N
>>>
View the product on vetter.de
Vetter GmbH
FLO EASY FIBC DISCHARGER
Discharging Systems : Flo Easy FIBC Discharger
The Flo Easy Discharger is designed for the efficient and economic discharge of materials having free to medium flow properties with 15° or 40° hoppers
to suit the material type. It handles a wide range of bag types from single trip, flat bottomed, to multi trip outlet spouted with or without liners.
FLO EASY STANDARD FEATURES
Fork lift or hoist loaded arrangements.
With or without dust control membrane and dust extraction port.
With or without vibration facility to assist material discharge.
Six blade knife for flat bottomed bags.
Operator access door for untying the bag outlet spout.
With or without patented liner tensioning system.
FLO EASY OPTIONS
Volumetric feeders.
Batch / continuous loss in weight systems.
Low headroom arrangement - de-mountable FLT loading.
Integral 2.5kg sack tip hopper.
Dust Collector.
Hazardous area / ATEX models.
IBC or Octabin discharge arrangements.
Bag closure Flo Choke device
ADVANTAGES
Easy to use, one man operation.
Discharges a wide variety of materials and bag designs.
Compact - minimum floor space.
Easy / quick installation.
Low maintenance.
TECHNICAL SPECIFICATIONS
FIBC (Big Bag)
Seam height :
Base :
Loops :
Capacity :
Discharge Rate :
Lined or unlined
To suit application
Up to 980mm square standard
Corner or cross corner
Up to 2000kg standard
Typically up to 10 bags / hour
>>>
View the product on flobag.com
FLOMAT BAGFILLA
LIFTING BAG - SET 1/6 - 1.0 BAR (14.5 PSI)
Set Lifting Bags 1.0 bar (14.5 psi), Type 1/6, with deadman controller, consisting of:
2 Lifting Bags, Type 1/6, 1.0 bar (14.5 psi)
1 Valise for Lifting Bag 1/6
1 Inflation hose 1.0 bar, 5 m,
yellow (14.5 psi,16.4 ft.)
1 Inflation hose 1.0 bar, 5 m, red (14.5 psi, 16.4 ft.)
1 Dual deadman controller 1.0 bar (14.5 psi)
1 Pressure regulator, 200/300 bar (3,000/4,500 psi)
1 Set repair material 0.5/1.0 bar (7.25/14.5 psi)
Advantages
low pressure point loading of maximum 1000 g/cm²
constant lifting power over the complete lift
high degree of flexibility, they grip a load around the edges, then lift and press simultaneously
can be easily repaired when damaged
operating pressure of 0.1 bar to 1.0 bar (1.45 psi to 14.5 psi), regulated by a controller
side walls made of high quality aramide
life cycle with average use and correct storage: 15 - 20 years
patented vulcanized valve connections optimize air supply even in difficult applications
Safety
quality management according to DIN ISO 9001:2000
continuous product monitoring by the German testing authorities (TÜV Rheinland)
bursting pressure is 3 to 4 times the operating pressure
the testing pressure is 1.5 times the operating pressure
tear strengths according to DIN 53354 and ongoing tear strengths according to DIN 53363
rubber gripping properties according to DIN 53357
piercing strength according to DIN 53373, 6 mm objects, 110 mm tin can, 2740 N
>>>
View the product on vetter.de
Vetter GmbH
FLO SPOUT FIBC DISCHARGERS
Discharging Systems : Flo Spout FIBC Dischargers for Difficult Products (pdf version)
The Flo Spout Discharger design has a unique diamond shaped 60 hopper to discharge the poorest flowing of
materials such as those that compact or have high shear properties. Designed to handle a wide range of bag types from single trip to multi trip outlet spouted, with or without liners.
FLO SPOUT STANDARD FEATURES
Fork lift or hoist loaded arrangements.
Load tested FIBC rigging frame.
With or without dust control membrane and dust extraction port.
With or without vibration facility to assist material discharge.
Six bladed knife for flat bottomed bags.
Operator access door for untying the bag outlet spout.
With or without patented liner tensioning system.
FLO SPOUT OPTIONS
Volumetric feeders.
Batch / continuous loss in weight systems.
Low headroom arrangement - de-mountable FLT loading.
Integral 25kg sack tip hopper.
Dust collector.
Hazardous area / ATEX models.
IBC or Octabin discharge arrangements.
Bag closure Flo Choke device.
ADVANTAGES
Ideal for materials with poor flow properties.
Easy to use, one man operation.
Dust control facility option.
Discharges a wide variety of materials and bag designs.
Compact minimum floor space.
Easy / quick installation.
Low maintenance.
TECHNICAL SPECIFICATIONS
FIBC (Big Bag)
Seam height :
Base :
Loops :
Capacity :
Discharge Rate :
Lined or unlined
To suit application
Up to 980mm square standard
Corner or cross corner
Up to 2000kg standard
Typically up to 10 bags / hour
>>>
View the product on flobag.com
FLOMAT BAGFILLA
HYGIENIC FLO SUPER CLEAN FIBC DISCHARGER
Discharging Systems : Hygienic Flo Super Clean FIBC Discharger
The Flo Super Clean Discharger is designed for the hygienic discharge of materials typically for dairy, food, pharmaceutical and
hazardous chemical applications. The patented clamping mechanism seals the bag or liner outlet preventing dust release / product contamination during discharge. Available with 15° - 60° hopper options for all types of material and to suit a wide range of outlet spouted bags.
FLO SUPER CLEAN STANDARD FEATURES
Fork lift or hoist loaded arrangements.
Load tested FIBC rigging frame.
With or without vibration facility to assist material discharge.
Hopper access door to untie the bag outlet spout.
With or without patented liner tensioning system.
Manual clamping mechanism
FLO SUPER CLEAN OPTIONS
Volumetric feeders.
Batch / continuous loss in weight systems.
Low headroom arrangement - de-mountable FLT loading.
Containment enclosure to clamping mechanism for increased protection, glove or cuff access.
Pneumatically operated clamping mechanism.
Integral 25kg sack tip hopper.
Dust collector.
Hazardous area / ATEX models.
Lined IBC or Octabin discharge arrangements.
Bag closure Flo Choke device.
ADVANTAGES
Easy to use, one man operation.
Sealed clamped system eliminates dust emission during discharge.
Prevents product contamination.
If loose liners are used the FIBC remains uncontaminated and may be reused.
Sealed liner for removal.
Compact - minimum floor space.
Easy / quick installation.
Low maintenance
TECHNICAL SPECIFICATIONS
FIBC (Big Bag):
Seam height :
Base :
Loops :
Capacity :
Discharge Rate :
Lined or unlined
To suit application
Up to 980mm square standard
Corner or cross corner
Up to 2000kg standard
Typically up to 10 bags / hour
>>>
View the product on flobag.com
FLOMAT BAGFILLA
MODEL A30 FIBC BIG BAG FILLING MACHINE
Discharging Systems : Model A30 FIBC (Big Bag) Filling Machine
The A30 is one of the newer additions to the range and has been designed to be adaptable and easy to use, producing stable and
accurately filled bags. The A30 not only fills FIBC's, it can be adapted to fill rigid bins (IBC's), Octabins and drums.
A30 STANDARD FEATURES
Filling FIBC's up to 2000kg capacity.
High accuracy base loadcell weighing systems.
Volt free contacts for feed device control.
Open 'C' frame design for all around access.
Liner inflation system.
Vibration table with sequenced control for stable and correctly filled bags.
Unique raise and lower bag arm assembly to ease bag hanging / removal.
Filling head with inflatable bag seal and dust extraction facility.
Carbon or stainless steel construction.
Fork lift truck bag removal.
A30 OPTIONS
Product feed devices to suit application with controls.
Automated pallet feed.
Automatic bag removal.
Roller or belt filled bag conveyor.
PLC control system / data interface.
Dust collector.
Hazardous area / ATEX models.
EC approved weighing systems.
CIP spray balls to filling head.
Hygienic containment options.
Rigid bin (IBC), Octabin, drum filling.
Mobile Units.
Ticket printers.
Pre weigh / check weigh systems.
Easy height adjustment for different bags.
ADVANTAGES
Easy to use, one man operation.
All around access.
Sealed filling / dust extraction facility.
High quality build / hygienic design.
Fills a wide variety of materials and bag designs.
Simple modular design.
Compact - minimum floor space.
Easy / quick installation.
Low maintenance.
>>>
View the product on flobag.com
FLOMAT BAGFILLA
MODEL D30 FIBC BIG BAG FILLING MACHINE
Discharging Systems : Model D30 FIBC (Big Bag) Filling Machine
The D30 provides the customer with a filling machine with automatic bag filling, bag removal and filled bag handling for high speed
operation. The D30 encompasses the patented cone table design to ensure correct bag shape and maximise bag capacity, producing stable and accurately filled bags.
D30 STANDARD FEATURES
Automatic bag filling sequences and bag removal.
Automatic height adjustment for different bags.
Filling FIBC's up to 2000kg capacity.
High accuracy loadcell hang weighing system.
Volt free contacts for feed devices control.
PLC control system with HMI for easy operator setup.
Liner inflation system.
Adjustable trombone bag arms and tilting head for easy bag hanging.
Patented raise and lower cone vibrating table with programmable sequence via HMI.
Filling head with inflatable bag seal and dust extraction facility.
Carbon steel or stainless steel construction.
Automated pallet feed.
Roller or belt filled bag conveyors.
Product feed devices to suit application with controls.
Plant control and data interfaces.
Ticket printer.
Dust collector.
Hazardous areas / ATEX models.
EC approved weighing systems.
Pre weigh / check weigh systems.
Operator platforms.
ADVANTAGES
Automatic facilities for efficiency and flexibility.
High throughputs / taller bags.
Ideal for difficult to handle materials.
Easy to use, one man operation.
Sealed filling / dust extraction facility.
Easy operator set up via the HMI for different bag heights, weights and materials.
High quality build.
Low maintenance.
Fills a wide variety of materials and bag designs.
TECHNICAL SPECIFICATIONS
FIBC (Big Bag) sizes.
Seam height:
Base:
Loops:
Capacity:
Up to 2000mm standard.
Up to 1100mm standard.
Up to 350mm standard.
Up to 2000kg standard.
Weighing system Typical =
1000kg x 0.5kg increments.
Bags / hour = Up to 22 bags / hour (free flowing materials)
Up to 30 bags / hour (pre-weigh-max)
>>>
View the product on flobag.com
FLOMAT BAGFILLA
MODEL S30 FIBC BIG BAG FILLING MACHINE
DATA SHEET : Model S30 FIBC (Big Bag) Filling Machine
The S30 has proved to be a very popular filling machine for high throughput and difficult to handle materials. The combination of the patented
cone vibration table, and the raise and lower system ensure correct bag shape and maximise bag capacity, producing stable and accurately filled bags.
S30 STANDARD FEATURES
Filling FIBC's up to 2000kg capacity.
High accuracy load cell hang weighing system.
Volt free contacts for feed device control.
PLC control system with HMI for easy operating setup.
Liner inflation system.
Adjustable trombone bag arms and tilting head for easy bag hanging.
Patented raise and lower cone vibrating table with HMI programmable sequencing.
Filling head with inflatable bag seal and dust extraction facility.
Carbon or stainless steel construction.
Fork Lift truck bag removal.
S30 OPTIONS
Product feed devices to suit application with controls.
Plant control and data interfaces.
Tickets printers.
Dust collector.
Hazardous area / ATEX models.
EC approved weighing systems.
Mobile units.
Pre weigh / check weigh systems.
Easy height adjustment for different bags.
Operator platforms.
ADVANTAGES
Ideal for difficult to handle materials.
Easy to use, one man operation.
Sealed filling / dust extraction facility.
Easy operator set up via the HMI for different materials/ weights.
Handles taller FIBC's
Fills a wide variety of materials and bag designs.
High quality build.
Quick / easy installation.
Low Maintenance.
ADVANTAGES
Ideal for difficult to handle materials.
Easy to use, one man operation.
Sealed filling / dust extraction facility.
Easy operator set up via the HMI for different materials/ weights.
Handles taller FIBC's
Fills a wide variety of materials and bag designs.
High quality build.
Quick / easy installation.
Low Maintenance.
>>>
View the product on flobag.com
FLOMAT BAGFILLA
PHARMACEUTICAL FIBC DISCHARGER
Discharging Systems : Pharmaceutical FIBC Discharger
The Pharmaceutical Discharger is designed for the exacting standards required by this industry sector with totally sealed, contained and
contamination free discharge and high quality construction with flexibility to meet specific customer requirements.
PHARMACEUTICAL DISCHARGER STANDARD FEATURES
Hoist, pillar lift or powered truck options.
Load tested rigging frame.
With or without vibration facility to assist material discharge.
Hopper access door to untie the bag outlet spout.
With or without patented liner tensioning system.
Manual clamping mechanism.
Containment enclosure to clamping mechanism.
Containment levels down to 25µg/m³
Liner disposal port.
Dust extraction facility.
Polished finishes.
316L stainless steel product contact parts.
PHAMACEUTICAL DISCHARGER OPTIONS
Glove or slotted membrane access to enclosure.
HEPA air inlet filter to enclosure.
Primary and HEPA exhaust air filter assembly.
Nitrogen purging.
Bag earth proving system.
Low headroom arrangement - de-mountable powered truck loading.
Volumetric feeders / batch / continuous loss in weight systems.
Bag evacuation / bag collapsing.
CIP cleaning.
Pneumatically operated clamping mechanism.
Hazardous area / ATEX models.
Bag closure Flo Choke device
ADVANTAGES
Easy to use, one man operation.
Contained discharge / eliminates dust emission.
Prevents product contamination.
Compact - minimum floor space.
Easy / quick installation.
Low maintenance.
TECHNICAL SPECIFICATIONS
FIBC (Big Bag)
Seam height :
Base :
Loops :
Capacity :
Containment :
Lined or unlined
To suit application
Up to 980mm square standard
Corner or cross corner
Up to 2000kg standard
Down to 25µg/m³
>>>
View the product on flobag.com
FLOMAT BAGFILLA
