Autres matériels de manutention (translation in progress): suppliers, wholesalers and manufacturers on Hellopro
Search   


Autres matériels de manutention (translation in progress) :

193 products
Select the category
    Selection of 40 products among 193
    HANDLING EQUIPMENT - OVERHEAD CHAIN > TRAKMASTER 152

    HANDLING EQUIPMENT - OVERHEAD CHAIN > TRAKMASTER 152
    DriveIn line 6 tooth main chain sprocket with hardened tooth form. The drive is fitted with a geared motor unit and chain drive incorporating a torque limiter.A 240v Single phase is required to suit an AC or DC control unit. Corner drives are available(90 and 180 deg).TensionA spring loaded tension device would be fitted to ensure correct chain tension and to compensate for variances within the system.ChainFully bi-planer and assembled in our works from hardened steel side links, rivets and hardened ball bearing wheels. The chain is immersed in protective lubricant after assembly. Breaking strain 3000 lbs (1340kg), safe load 30 lbs 13.4kg per pendant at 6" (152mm) pitch - 60 lbs (26.8kg) with coupled pendant.TrackHigh quality tight coat galvanised tubular section 1.625" (41mm) o/d with 0.12" (3mm) wall thickness and an offset slot. Track curves are manufactured from cold drawn seamless steel tube, the slot machined in and the curve then hardened. >>>
    View the product on mhel.co.uk Midland Handling Equipment Ltd
    MATERIAL HANDLIG - ELECTRIC COUNTERBALANCE > FBK PAC SERIES

    MATERIAL HANDLIG - ELECTRIC COUNTERBALANCE > FBK PAC SERIES
    Electric Counterbalance - AC Power4 Wheel Pneumatic Tyres 80 Volt2.0 - 3.5 tonnesWith the application of AC technology, this series gives exceptionally smooth, quiet, efficient - and above all, powerful - performance. Suited to both indoor and outdoor use, it is ideal for situations in which the strength and speed of an IC engine are needed but emissions or noise are not acceptable.The AC Power shares many of the features which have made the DC models so popular - comfort, visibility, control, energy efficiency, ease of service, rapid troubleshooting… and the ability to be programmed, without any special tools, to the needs of each application and driver. >>>
    View the product on mitsubishi-forklift.co.uk Mitsubishi Forklift Trucks UK
    ABRU BLUE SEAL STEP LADDER 2T REF 1203-002

    ABRU BLUE SEAL STEP LADDER 2T REF 1203-002
    2 Tread Blue Seal Step LadderThis Blue Seal step ladder is ideal for trade and domestic use with an extra large standing platform 50% bigger than standard stepladders, with strong deep treads and twin handrails for comfort and security.* Extra large standing platform* Strong deep treads* Twin handrails* Optional work tool tray* Non-slip rubber feet* 150kg /23.5 stone work load capacity* EN131 Standard >>>
    View the product on tbdavies.co.uk T.B. Davies (Cardiff) Ltd
    ACCESS - MANITOU 160ATJ

    ACCESS - MANITOU 160ATJ
    The Manitou 160ATJ offers the ability to follow you on all types of terrain. Responding to your requirements, offering better productivity, reliability and safety. Designed to access the most restricted areas. Three different drive speeds are available to the operator with full height elevation in 40 seconds. This machine is built to work and has been built to handle rough terrain conditions whilst maintaining operator safety. >>>
    View the product on fork-rent.co.uk/ Fork Rent Plc
    DEBANDER SYSTEMS FOR STRAP REMOVAL - PALLET DEBANDER

    DEBANDER SYSTEMS FOR STRAP REMOVAL - PALLET DEBANDER
    The Pallet Debander from Industrial Automation removes up to 8 vertical pallet straps simultaneously and can be installed with all major depalletisation units on the market. Pallet Strap Removal System PictureBenefits of the debander: - Reduction of labour costs and improvement in site efficiency by automatically removing vertical pallet straps from incoming pallet stacks of empty cans, bottles or other containers. - Quick and simple installation into new or existing lines due to its compact and modular design. - Simplifies waste removal by automatically granulating the removed bands. Variable granulation size to match disposal and recycling requirements. - Industry proven product already in use in over 50 brewery, soft drink and food production locations worldwide. >>>
    View the product on ind-auto.com Industrial Automation
    BOAT - RODMAN 1040

    BOAT - RODMAN 1040
    The strength of a leader The size of the Rodman 1040 sets it apart from the rest of its competitors–as can be seen in the spacious flybridge complete with side seating and double helm seat, the aft cockpit, which is much bigger than that on other boats of this kind, and the pleasant bow solarium. Perfect for enjoying social occasions are the wide open spaces, including a spacious cockpit with integrated bathing platform-the ideal spot for everyone to come together to sunbathe, swim and enjoy the sailing experience. In the interior spaces of the Rodman 1040 comfort is the predominant factor. Extraordinarily meticulous finishes and numerous other details make each day at sea a real pleasure. This is evident throughout the salon-dining area, with a large dinette, L-shaped sofa and integrated kitchen, and in the two cabins–one for the owner and one for guests- with wardrobes and stowage space. It is also evident in the inclusion of both general lighting and reading lights and the option to even choose between different types of duvet. >>>
    View the product on rodman.es Rodman
    PALLETIZER APOLLO CK.1500

    PALLETIZER APOLLO CK.1500
    Automatic palletizer CK1500 is a very stable construction with 2 columns, conceived to palletize the paperboards, bags, racks, cases and other goods packed. In fact, the CK1500 is synonymous with minimum investment for a maximum quality. The installation and the adjustment are extremely simple. APOLLO is fully at your disposal to inform you about the many possibilities of the CK.1500 where other installations which are offered to you. Technical data: Capacity: It depends on the product, its dimensions and the feeding system. Height of maximum stacking: Up to 2.200 mm Dimension of the pallets: 800 X 1.200 mm, (DIN 15146) 1.000 X 1.200 mm, 1.200 X 1.200 mm. Weight of the loading: roughly 200 kg per layer. Surface on the ground: 12m² Food Engine: 3 X 240/400 V, 50 Hz Food orders: 24 V Pressure of the air: 6 bar Completions:All colors RAL are possible Conform to the schedule of conditions the EEC Additional/options: Side push rods to center the layer precisely. Other sizes of pallets Storage of the pallets with automatic conveyor. Conveyors with rollers or chains for transfer of the pallets charged. Special execution according to particular specifications Store and slot-machine of guides >>>
    View the product on Apollo France
    CONTAINER HANDLING - HIGH SPEED ROTARY - RP125 ROTOPLANT

    CONTAINER HANDLING - HIGH SPEED ROTARY - RP125 ROTOPLANT
    The 'RP125' is an eight head, continuously rotating high-speed container handling solution. Filling can be via auger, cup filler, counter or high-speed weigher such as multi-headed combination weighers. Containers of a wide range of geometric shapes and neck configurations can be handled. Changeover from one container type to another is accomplished with the minimum of fuss due to quick and easy replacement of change-parts (no tools required). The main turret has eight stations, each incorporating vibratory overflow funnels with variable vibration frequency to suit a broad cross section of product types. An optional, totally enclosed dust extraction system is available as part of the central turret, to ensure 'cleanest filling performance is achieved when running dusty products. >>>
    View the product on webbautomation.co.uk/ G Webb Automation Ltd
    DS PALLETISING SYSTEM

    DS PALLETISING SYSTEM
    DS palletising system On the DS range of palletisers the rows are formed by a rotation head and a formation belt conveyor. The rows are transferred to the stripping table by a row pusher. With the addition of a special program it is possible to palletise gaps between the sacks without mechanical stops. This gives additional flexibility in the choice for sack dimensions (capacity up to 2200 sacks per hour). >>>
    View the product on arodo.co.uk Arodo UK Ltd
    PALLET DISPENSERS (FLOOR LOADING)

    PALLET DISPENSERS (FLOOR LOADING)
    Pallet Dispensers (floor loading) This machine can both neatly stack individually-presented pallets and dispense them individually at floor level from a stack. The system has visual load alarm and status indicators, integral stack guides to ensure square and stable loads, interlocked access doors and strong safety screen protection for safe system operation. Floor-level photo eye security helps to prevent accidents or dropped stacks. Easily adjustable multi-position lifting pins enables one machine to fit all normal pallet shapes, sizes and clearances. For use with a hand pallet truck. Places pallet individually. Can handle two-way, four-way, Euro, block, winged and stringer pallets. Normal lifting load capacity of 12 pallets, increasing to a maximum of 500 kg, 20 pallets. Suitable for pallets up to 1200mm x 1200mm. Guard with interlocks and photoelectric beams ensure safe operation of system. Option available with gates. Control options include simple levers, single-touch button control and fully automated. The machine is designed and manufactured in accordance with CE specification. Its basic dimensions are height = 2m (12 pallets), 3.1m (20 pallets), width = 1.8m, depth = 1.4m. WHY USE THIS MACHINE? Eliminates manual handling thereby reducing the likelihood of costly injury compensation claims, stoppage time and pallet damage. Increased productivity. 24 hours a day reliability and long life. Heavy duty yet compact design. Completely electrically-driven so compressed air NOT required. Operates in a small area. >>>
    View the product on brillopak.co.uk Brillopak Ltd
    PALLETISERS PM 300 AND PM 400

    PALLETISERS PM 300 AND PM 400
    The palletisers type PM 300 and PM 400 are gantry type robot palletisers, and designed for smaller and medium capacity packing lines. The unique side bag pick-up system with top press plate gives straight-sided and stable pallets suitable for high storage stacking. Can palletise all sizes of bags and boxes on all sizes of pallets. Can palletise bags with or without overlapping. Can also palletise and de-palletise boxes with a vacuum pick-up system. Compact, low investment and low maintenance costs. Very easy customer programmable. Memory for 20-30 product programs. Easy moveable to different locations. Possibly the best palletiser in this capacity range. Capacity: 300 and 400 bags per hour. >>>
    View the product on ehcolo.dk Ehcolo
    C16I - DIGITAL LOAD CELL

    C16I - DIGITAL LOAD CELL
    C16i - Digital load cell With the digital C16i load cell and the TRADE® PC software, HBM provides a digital weighing system solution offering clear advantages over a conventional solution. Facilitated off-center load compensation with platform weighing machines: comfortable and error-free sensitivity balance via software command; no soldering in of resistors etc. Enhanced maintenance options: TRADE® makes the weighing system transparent right through to the load cell thus rendering diagnosis easier and more reliable even remotely via phone. Reduces hardware required: no weighing indicator nor alibi printer necessary. Lower noise sensitivity: digital signal transmission. The custom designed TRADE® software – PTB test certificate D09-00.34 – which is admissible for verification enables measured data to be displayed and stored accordingly. Furthermore, a DDE interface is available for data exchange with other programs. The only thing the scales manufacturer has to do is to reset his logistics software that communicates with commercially available weighing indicators to the TRADE® software from HBM. The C16i digital load cell has the same dimensions as the analog C16a version. Therefore, no mechanical modifications are required when retrofitting the scales. Key Feature(s) Digital output signal (RS-485/4-wire) Self restoring rocker pin Simple to install Stainless steel material, laser welded, IP68 Legal for trade verification according to OIML R60 up to 3000d Meets EMC / ESD requirements according to EN 45 501 Inbuild overvoltage protection Nominal load 20 t / 30 t / 40 t / 60 t Accuracy class D1, C3 Approvals OIML, GOS Notes Digital load cell, EMC approved Material Stainless steel Protection class IP 68 (IP 69K) >>>
    View the product on hbm.com HBM UK
    SPORT BOAT - 1800 MX

    SPORT BOAT - 1800 MX
    The 1800 MX comes complete with full fiberglass liner, back-to-back seating that easily converts into a sun lounge and is a great lakefront sport boat or an easily towable package.With TrailerStorage Length (tongue folded to side) 21'5" (6.52 m)Beam 7'9" (2.36 m)Approx. Weight (w/Std Engine) 2,456 lbs (1,114 kg)Length rigged 22'6" (6.86 m)Height rigged 6'1" (1.85 m)Without TrailerLength overall (LOA) 17'7" (5.36 m)Deadrise 19°Beam 7'0" (2.13 m)Approx. Weight (w/Std Engine) 1,991 lbs (903 kg)Length rigged 18'9" (5.72 m)Draft hull 1'6" (.46 m)Draft max 2'11" (.89 m)Bridge clearance 3'8" (1.12 m) >>>
    View the product on maxumboats.com Bayliner
    PALLETISERS C3000

    PALLETISERS C3000
    The C3000 is designed for end-of-line palletising for medium capacity production lines. The automatically adjustable side guides, spacers and end guides guarantee optimum stacking and fast changeover times. The C3000 takes up relatively little floor space due to its compact and solid construction. The C3000 is suitable for product infeed at both high and low levels, offering maximum flexibility in the system design. Because of the modular product design, different levels of machine automation are possible, as well as by upgrade in a later phase as your production requirements change in the future. >>>
    View the product on csiuk.co.uk CSi UK
    PALLET - SINGLE TRACK XL

    PALLET - SINGLE TRACK XL
    Single track XL (100x100 pallets) Pallet handling system XL is designed for light loads up to 3 kg. The system is suitable for a wide range of applications within different segments. The maximum size of the products on the pallets depends on the shape of the products and the location of their centre of gravity. Examples of application areas are transport and assembly of spark plugs, gear wheels, fuel injectors, hydraulic pistons, head lights, brake cylinders, cell phones and hard disk drives. The XL pallet system includes a special flanged guide rail which prevents pallets from climbing when accumulated. Guide rail brackets specifically designed for the pallet track width are available. The system also includes pre-bent guide rails for bends. Technical characteristics Pallet size: 100 mm x 100 mm x 22 mm Pallet weight: 0,11 kg Maximum load on pallet 3,0 kg (including pallet and fixture) >>>
    View the product on flexlink.com Flexlink
    ETFA WASHING MACHINES ETFA C80 AND C100

    ETFA WASHING MACHINES ETFA C80 AND C100
    For track services (parts sampled for inspection), small production volumes, tools, part supports, etc. Performance Washing module with manual loading/unloading Automatic washing cycle with timing control Controlled bath temperature Possibility of integrating a drying function Autonomous or centralised operation Parts covered Thimbles Bowls Pinions Pawls Differentials Main shafts Secondary shafts Rims Crankshafts >>>
    View the product on gardnerabrasives.com Gardner Abrasives Groupe - UNOVA
    AIRPORT BAGGAGE HANDLING - AIRPORT BAGGAGE CAROUSEL

    AIRPORT BAGGAGE HANDLING - AIRPORT BAGGAGE CAROUSEL
    A Robson Airport Baggage Handling Carousel provides an endless surface which baggage can be displayed prior to reclaim. A combination of straight and radius sections gives the Robson carousel the flexibility to form different types of shapes such as T, U, O, L most shapes can be accommodated depending on available space.Rigidly constructed on to a 6mm mild steel sub-frame, choices of galvanised or powder coated mild steel or x240 grit finish stainless steel casings are available. >>>
    View the product on robson.co.uk Geo. Robson & Co. Ltd
    RECYCLABLE LOADHOG LID - EURO LID

    RECYCLABLE LOADHOG LID - EURO LID
    FOR USE WITH 1200mm x 800mm PALLETS: FOR SAFER AND MORE EFFICIENT INTERNAL AND EXTERNAL HANDLING AND TRANSPORTATION. The Euro pallet sized Loadhog lid secures level pallet loads contained in conventional and returnable packaging such as plastic containers, tote bins, cardboard boxes, and crates stacked on 1200mm x 800mm wooden or plastic pallets. KEY DATA: Weight: 2 strap: 9.5kg / 4 strap: 12.25kg External dimensions: Width: 818mm / length: 1218mm / overall height: 105mm Nesting height: 48mm Stacking height when nested: 14 units/metre >>>
    View the product on loadhoglids.com Loadhog Ltd.
    BOAT - ABSOLUTE 39

    BOAT - ABSOLUTE 39
    RB Boat Ref 11911457 Manufacturer Absolute Model 39 Price £226,750 Inc VAT VAT Year 2008 Length (ft) 37' 1" Length (m) 11.30 Engine Model Volvo Penta D4 300- EVC Fuel Type Diesel Engine HP 300 MaxSpeed 36.00 Berths 4 Cabins 2 Location Southampton Country GB Description The Absolute 39 has been with us now for just over two years and has firmly taken it's rightful place as one of the best in class. The unique two cabin, two heads layout offers great accomadation and storage. The boat is a full med spec boat which includes reverse cycle heating and air conditioning. This is a fantastic little boat at a great value price! >>>
    View the product on rightboat.com Rightboat.com
    PALLETISING AND DE-PALLETISING - BAG PALLETISING MACHINE

    PALLETISING AND DE-PALLETISING - BAG PALLETISING MACHINE
    The main advantage of this palletiser is its versatility along with a significant production rate. The ability to intersect various bags during the layer formation phase; overlapping the emptiest parts of the bags, makes it possible to achieve extremely compact configurations, well within the perameter of the pallet. This is true even using bags which are not always compatible in size. The UPR series of palletisers come in two main versions depending upon the type of drive:- Capacity up to 600 bags / hour Capacity up to 900 bags / hour The palletisation rate is obviously linked to the format and number of bags that make up the pallet. In both versions it is possible to palletise bags of different dimensions without resorting to any type of mechanical adjustment or modification. The UPR series of palletisers have two linear axles, servo-controlled by an encoder on asynchronous and / or vectorial motors, or brushless motors. Transmission is achieved with notched belts on negative pulleys. The design of new sliding elements has made it possible to eliminate the usual rotating parts and thus to reduce friction wear due to turning. This has also improved operating reliability and reduced operating noise. The machines robotic palletising functions are ensured by a clamp equipped with self-regulation and an automatic bag centring device. The bags, coming from a bagging line, stop at a given height on a special pick up roller conveyor. The clamp prepares the layer on the preparation sliding hatches and this process is completed by the perimeter compacting action of the pressing side plates - the perimeter compacting can be varied according to the selected working programme. A special lift takes the empty pallet from the automatic distributor and positions it under the layer preparation sliding hatches. Once the layer is completed, the pre-shaping sliding hatches open and the layer is set on the pallet below. The hatches are then closed and can be used to press the layer, lifting the pallet against the lower surface. Once the pallet has been completed, the lift lowers to evacuate the pallet onto the roller conveyor and allows a new empty pallet to enter. >>>
    View the product on webstergriffin.com Webster Griffin Ltd
    PLATFORM LIFTS AND MOBILE LOADING PLATFORMS

    PLATFORM LIFTS AND MOBILE LOADING PLATFORMS
    If you haven't got dedicated loading bays or simply don't want to tie them up whilst unloading deliveries by hand then you'll like our Mobile Loading Platforms. Easily moveable by using a forklift the platform lift is chained to your vehicle and then the castors are raised to give a very stable working area. Goods can be unloaded and transfered to pallets for removal by forklift. With a safe working load of 3000kg (or more if required) the size of the platform can be designed to suit your requirements. It comes complete with all securing chains, an access ladder and drop barrier. With no motors or hydraulics to maintain, service costs are kept to a minimum. Contact Chase Equipment NOW to discuss YOUR specific platform lift requirement. Whatever your loading challenge is, Chase will make your business loads easier. >>>
    View the product on chaseequipment.com Chase Equipment Ltd
    ROBOTIC PALLETIZER - MODEL A1600

    ROBOTIC PALLETIZER - MODEL A1600
    A Robotic Palletizing Solution with a very easy user interface. Robotic Palletizer Model A 1600 Columbia/ Okura's electric servo-drive, high-speed A1600 robotic palletizer is simple to use and is easily introduced into any existing material handling system configuration. With its variety of end effectors, ability to palletize multiple or individual package types, and easy user interface, the A1600 Palletizer space is essential for companies looking to maximize their space and minimize time and labor costs. >>>
    View the product on columbiaokura.com Columbia/Okura Groupe - OKURA Group
    CURTAIN SHELTERS

    CURTAIN SHELTERS
    He standard curtain shelter is suitable for all vehicle sizes and has a flexible design. Should a vehicle deviate from the dockin centre-line and hit the shelter frame, built-in springs allow the shelter to follow the movement without being damaged. Its flexibility and high wear and tear resistance, in combination with a high price-performance ratio, contribute to the fact that the vast majority of all European loading bays are equipped with this standard dock shelter! >>>
    View the product on crawfordsolutions.com/Pages/default.aspx Crawford UK Ltd
    ISWAP MICROPLATE GRIPPING

    ISWAP MICROPLATE GRIPPING
    The iSWAP is a gripper tool that can access items on or off the deck. This robotic gripper is highly flexible with its vertical and rotary movement capabilities. The iSWAP may be used to automate these microplate applications: -Storage -Incubation -Reading -Washing As with the CO-RE grippers above, there are no positional vectors to teach. The software automatically gets positions from the rack definition. >>>
    View the product on hamiltoncompagny.com Hamilton
    DRY ICE MOBILE PELLETIZER

    DRY ICE MOBILE PELLETIZER
    Dry ice mobile pelletizers for quick, efficient production of high density CO2 pellets on-site or in process lines in exact quantities needed. Recovery unit for recapturing escaping CO2 gases now becomes an affordable tool for increasing profits/reducing cost. Mobile high performance blasters with improved airlock to assure better and more reliable cleaning. Now… Manufacturing of dry-ice is basically an easy operation. Problems start from the time of manufacturing to the time of usage. Typically only 50% of the expensive CO2 gas is actually used. Handling, storage and transport are the main problems since dry-ice is mostly manufactured off-site and almost immediately starts to sublime or melt. Once sublimation starts, the pellets begin to lose their hardness and solidity and therefore their power and strength. The revolutionary solution developed and patented by Triventek is on-site production by the new pelletizer with integral recovery unit at the point of usage in exact quantities. Making dry-ice The manufacture of solid CO2 (dry-ice) has been known for the past 50 years. In the process of manufacturing dry-ice pellets, liquid CO2 at high pressure will be released into a cylinder. By releasing the gas into atmospheric pressure half the gas will turn into snow and the rest will escape. The snow is then compressed into solid dry-ice pellets. The Triventek solution The escaping gas is directed back to the unique recovery unit and reused. This is an on-going process which eliminates gas losses to almost zero and as a result reduces the price of dry-ice by half. A further significant advantage is the capability to move the equipment for producing dry-ice to the point of local operation whether for a chilling process or for cleaning purposes. The equipment comprises a pelletizer and recovery unit for chilling processes with the addition of a blaster for cleaning. All the equipment is fully mobile. They can all pass through any standard door opening and only require a standard power supply. New market Dry-ice has long been considered an alternative media for chilling and cleaning . But until now it has not been possible either logistically or commercially. With the new patented Triventek range of equipment new market opportunities are now emerging. Chilling Dry-ice is twice as good as ice-water when used as a chilling medium. It has always been popular in the catering, delivery, transport and shipping industries where normal electrical power supply is not available. In the food industry, the pelletizer and recovery unit can be integrated directly into the process line reducing losses due to sublimation during transport, storage and handling. In an automatic process system handling can be now almost eliminated. >>>
    View the product on triventek.com Triventek
    SHAFT- LOADING PAYOFF MACHINE

    SHAFT- LOADING PAYOFF MACHINE
    Mobile shaft-loading range of payoff machines utilising a shaft to support the cable drum. Hydraulically operated for effortless loading, the design also enables the unit to be used for transporting cable drums around the working area. As with other Autoreel machines, the ergonomic design facilitates the handling of even the heaviest drum by only one man. A roller spanning the width of the machine allows a smooth cable flow and prevents damage. >>>
    View the product on autoreel.co.uk Autoreel Ltd
    TELESCOPIC LOADING SPOUT FOR CLINKER - TYPE TKS

    TELESCOPIC LOADING SPOUT FOR CLINKER - TYPE TKS
    Telescopic Loading Spout for Clinker - type TKS The Telescopic Loading Spout ensures truck, barge or ship loading with integral dust control and automatic operation. The design is adapted to heavy-duty applications as well as applications which require an economic solution for low and medium duty operation. Heavy-duty design: applications with many loading cycles per day and for high capacities up to 700 t/h. Low and medium duty design: applications with approximately five (5) loading cycles per day and loading capacities of 100 - 150 t/h The variable loading capacity, the loading spout with dust suppression system and the wear-resistant design for clinker loading are main features of the AUMUND-product for specific requirements. The standard lift is ranges from 3.000 to 6.500 mm. >>>
    View the product on bwmech.co.uk B&W Mechanical Handling Ltd
    ECONOMY LOADER

    ECONOMY LOADER
    The unique BestReach Economy Loader delivers outstanding carton-loading performance and value in small - medium warehouses without loading docks. Trailer penetration of 8.5 metres 22 metres / minute belt speed Easy to manoeuvre on robust 200mm locking castors Technical Specification Power Supply Single phase x 240v x 50 Hertz- 0.37kw drive Belt Material Two ply, high grip, rough top finish Effective Width 600mm Surface Speed 22 metres per minute Weight 950kg Chassis Construction Heavy gauge fabricated hollow steel section Castors 150/200mm dia/swivel/braked Forward/Reverse/Stop Controls located on both sides of infeed boom Features Simple to operate. Available with gravity skatewheel or powered roller tongue. Easy to manoeuvre for multi-door applications. Suitable for 20 foot and 40 foot trailers. Easily connects to Best flexible conveyors for continuous conveying. >>>
    View the product on bestconveyors.co.uk Best Conveyors
    BOATS - CUSTOM LINE 112'

    BOATS - CUSTOM LINE 112'
    Following the success of the preceding Custom Line 112, the Custom Line 112 NEXT couples ample spaces with high performance. Model of the planing line, the Custom Line 112 NEXT is known for her smooth, stong line, balanced harmoniously with the structure of the hardtop and with the wide windows. The internal layout offers generous dimensions dedicated to the living area on the main deck with a vast sitting room and separate dining area, while the night quarters offer four spacious cabins that receive light from the four large open view windows looking directly onto the sea. The flybridge is equipped with large sunbeds and jacuzzis and allows sun lovers to fully enjoy life in the open. The excellent performance in terms of speed combines with the detail for comfort ensured by the latest on board instrumentation and the ARG series. >>>
    View the product on boatshop24.co.uk Boats & Yachts for Sale




      Search    
     
     
     
    Search
    See all of the sector's products : Logistics