Selection of 51 products among
1508
HYDRAULIC BOLT TENSIONERS
Generate Accurate & High Loads for all Flanges.
Designed specifically for all Oil & Gas applications.
The TRT tensioners fit all standard API, ANSI B16.5 & Compact flanges.
Special Series concepts
for all B7, L7 & B16 studs bolts.
Designed with the aid of Solidworks® and Cosmos® for FEA.
Light-weight, compact and versatile line of tensioners.
Safety First: Overpressure and Overstroke full protection.
Spring Return Piston reduces operator fatigue & shrinks operation time.
Operates at a maximum pressure of 21,750 psi / 1500 bar.
Dual port design allows two time faster operation than single port tensioners.
Environmentally friendly: Can be pressurized with Rapid-Torc Water Mix (ISO14000).
High strength AISI 4340 steel components for long lasting performance.
Dual Port Design simplifies hose connection and eliminates Tee-block.
Visible Piston Stroke indicator for all models.
Time saver: All models are able to stroke 15mm.
Floating piston for small alignment compensation.
Bolt coverage from 1" to 3 1/2" with just three tools.
Interchangeable adapter kits available for both Metric and Imperial sizes.
Anti-slip tool surface improves operator grip and increases safety.
Socket design allows tensioners to fit all upside down applications.
TRT series is adaptable in a minute when washers.
All exterior surface are knurled to allow for easy handling.
Larger sizes includes eye bolts for additional support.
Option: Ultrasonic measurement system available also.
>>>
View the product on rapidtorc.com
Rapid-Torc
EQUIPMENT FOR FUSION WELDING POLYS P-1
POLYS P-1 with thermostatic control
The POLYS P-1 welders are targeted for welding of plastic pipes from 16 to 63 mm diameter, depending on the options used. It is an equipment of a simple design
for the short duration repair and maintenance work, for the hobby or as an addition to the POLYS P-4. The design and the price are targeted to the above market.
The POLYS P-1 is available in three modifications with different shape, type of use and input power.
The important part of this equipment are the patented jaw attachments. The main advantages of these attachments are relatively small size, and high thermal efficiency.
The attachment change is quick and simple. It is possible to do this when even hot without runninga risk of damage to the welding surface. The welding surface is coated with non sticking material allowing prolonged use.
Heater shape variations
The Green Line welder can be purchased with three different shapes of heaters, allowing to satisfy all
the needs of maintenance men or home users. The heater elements are of heavy duty construction and they provide a constant temperature level over the full heater length. They are identical parts to the professional Blue Line of hand welders. The handle can be ordered either in green or black colour.
650W
This hand welder has a heater rod 32mm in diameter. The input power is 650 W and you can weld pipes from 16 to 63 mm diameter. Small heater rod size makes it possible for use in confined spaces. The attachments for this welder are of
the so called jaw type.
--------------------------------------------------------------------------------
850W
The hand welder with the right angle heater rod has 500 W input power and it is used mainly for maintenance and repair work. The angle type heater rod makes it useful for work in various hard to reach places. The attachments are of the same jaw type as for the straight heater rod above.
--------------------------------------------------------------------------------
500W
The knife heater welder is designed for pipe sizes from 16 mm to 75 mm in diameter. The input power is 850 W. The attachments here are of the pair type, which is known to have high heat transfer rate due to the large contact area between the heater and the attachment.
>>>
View the product on dytron.info
DYTRON
CELLA ROBOTIZZATA PER CONTROLLI QUALITÀ TRIS
This system ensures a high standard of quality for the finished product, reliability and repeatability of the control, rapid execution of the operation, thanks to the combination of an
anthropomorphized robot with one or several video camera devices.
Processing flaws (cracks, bulging, porosity, scoring, etc.) or assembly errors (presence of all components in the assembled piece, proper assembly) are monitored fully automatically by the system, which can be used to control the whole of the production cycle. Laser marking, integrated inside the robotized cell, completes the finished product.
>>>
View the product on dauma.it
Dauma
1200-EC UV CURING FLOOD LAMP
The DYMAX 1200 Series focused beam UV curing flood lamps use high-intensity UV light and/or visible light for the rapid curing of UV adhesives, UV coatings and UV inks. A DYMAX 1200-EC UV flood lamp
delivers broad spectrum light concentrated primarily in the UV-A range (320-390 nm wavelength) to achieve maximum cure depths and "tack-free" cures, typically in 10-30 seconds. DYMAX 1200-EC UV flood lights are specifically designed for applications requiring high-intensity UV light concentrated in a narrow 1" x 6" beam.
High intensity 1" x 6" focused beam of UV light
Tack-free UV cures in 10-30 seconds
Rugged brushed aluminum construction
Ideal for UV curing trays of small parts
UV curing flood lamps can be conveyor mounted or used as stand-alone, bench-top systems
1200-EC focused beam UV curing lamps provide low cost cures for bonded or coated areas larger than 1/2 inch and can be used for UV curing trays of small parts or parts arranged in a linear configuration. They are used for a variety of UV bonding, UV potting, UV sealing, UV tacking and UV encapsulating applications within the industrial, automotive, electronic, medical device and optical industries.
The 1200-EC focused beam UV curing flood lamp consists of a power supply, reflector housing and 400 Watt metal halide UV curing bulb. Accessories can be ordered with or retrofitted to the UV curing lamp after purchase, including shutter assemblies, UV shields and UV flood lamp stands.
Output Power 400 Watts
UV Light Source Unfiltered full spectrum UV focused beam light
Typical intensity in the UVA range (320-390 nm*)
at 4.5" from bottom edge of reflector housing 350 mW/cm2
Dimensions of Illuminated Area 1" x 6" beam (2.5 cm x 15.2 cm)
EC Input Power Requirements Universal 90-265 VAC (grounded), 47-63 Hz
1200-EC Power Supply Weight 12.25 lbs. (5.6 kg)
1200-EC Power Supply Dimensions (approximate) 12" L x 16" W x 4" H (30.5 cm x 40.6 cm x 10.2 cm)
Reflector Housing Dimensions(approximate) 9" L x 10.5" W x 7" H (22.9 cm x 26.7 cm x 17.8 cm)
Reflector Housing Weight 3.4 lb. (1.5 kg)
>>>
View the product on dymax.com
DYMAX
CABLE TIE - T120ROS
The ever increasing demands within the mass transit, automotive and data cable installation industries for tighter bundles has led to problems with the conventional inside serrated cable tie design
causing damage to cable insulations, especially in vibration environments. The OS range of outside serrated cable ties have overcome these problems. The design offers high tensile strengths, low insertion forces and a smooth surface to the cable insulation - minimising any indentation or damage. The curved shape of the head allows the tie to follow the contours of the cable and takes up less space than other designs of cable ties.
Designed originally for the automotive market these ties are now being used in many areas where thin-walled or soft insulation wires and cable are being installed, e.g. railways, aircraft, data cable installations, electronics.
Base Data
Colour Black (BK)
Features and Benefits 2 The ever increasing demands for tighter bundles in cable installations has led to problems with the conventional inside serrated cable tie design, causing damage to cable insulation, particularly in vibration environments. The Outside Serrated range of ties overcomes these problems offering high tensile strengths, low insertion forces and a smooth surface to the insulation minimising indentation. The curved head allows the tie to follow the contours of the cable and take up less space than other cable tie designs.
Local Order Number T120ROS.HB3P
Master headline 1 (product) OS Series Outside Serrated Ties
Product Dimensions
Bundle Diameter max (Metric) 105 mm
Bundle Diameter min (Metric) 5.0 mm
Cable Tie Head Height (Metric) 8 mm
Cable Tie Head Length (metric) 9.5 mm
Cable Tie Head Width (metric) 13.5 mm
Cable Tie Width max. (metric) 7.6 mm
Height H (Metric) 1.8 mm
Length L (Metric) 385 mm
Minimum Tensile Strength (N) 535 N
Thickness T (Metric) 1.8
Width W (Metric) 7.6 mm
Logisitic and Packaging
EAN code Harmonisation Only 5022660329500
Package Content 100
Quantity per Bag
Material and Specifications
Flammability UL94 V2
Material Polyamide 6.6 Heat Stabilised (PA66HS)
Material Shortcut PA66HS
Material_Specification RoHS, HF
Operating Temperature (Metric) -40 °C to +105 °C Continuous, (+145 °C for 500 h)
ROHS Conformity TRUE
>>>
View the product on hellermanntyton.co.uk
Hellermann Tyton
