Assembly: suppliers, wholesalers and manufacturers on Hellopro
Search   

Assembly :

1615 products
Select the category
Selection of 58 products among 1615
1HD/02 PLC SINGLE HEAD WELDER

1HD/02 PLC SINGLE HEAD WELDER
Features and Benefits: Ability to weld variable angles of 30-180 degrees. 0.2 mm weld bead knife limitation for knife-off finish. Double force table cylinder for acrylic profiles. Perfect for twin reverse butt welding. Footswitch leaves hands free to locate profile. Max. profile welding width 220 mm at 45 degrees. Max. profile height 140 mm. Two hand safety control. Safety clamping. Mitsubishi electronic control. Technical Data: Power Requirements 220v, 1~ Compressed Air 7 Bar/100 psi Air Consumption 20 Ltr. Per cycle Dimensions (length, depth, height) 900 x 900 x 2100mm Weight 355KG >>>
View the product on kombimatec.com KOMBIMATEC MACHINES LTD
AMBERSIL 40+ 400ML AEROSOL

AMBERSIL 40+ 400ML AEROSOL
The complete maintenance treatment for protection against corrosion, water displacement, lubrication and flash rust removal. Too many applications to list, but more than 40! The engineer's essential cure all. * Quickly frees seized nuts, bolts and bearings * High corrosion protection and water displacement properties - Passes IP 178, Methods A and B * Remains operational at sub-zero temperatures * Non conductive film * Safe on most paints, rubbers and plastics * Rolls Royce Approved 1036J * Treated metals resist finger printing and remain bright even in highly corrosive conditions >>>
View the product on Maintech
CARTON BOTTOM STAPLER MEZGER PERFECTA

CARTON BOTTOM STAPLER MEZGER PERFECTA "PEL 323"
Bottom-stapling empty folding boxes with joining flaps: with stapling pillar for bottom stapling empty folding boxes made from solid or corrugated cardboard. A rapidly adjustable carton guide stop permits precise stapling over the flap joint: L = length stapling. Complete with finger protecting device and maintenance unit. Stapling is triggered by a foot valve. Depending upon the type of cardboard, different large sized staples can be insertedwithout adjustment: MG® 312, MG® 315, MG® 320, MG® 323 (for solid and corrugated cardboard with single or double flute). For max. carton sizes: L 100 x W 67 (PEL 323 D: 58) x H 85 cm including one flap. >>>
View the product on mezger-heftsysteme.de MEZGER Heftsysteme
INCH ACME SCREW ASSEMBLIES

INCH ACME SCREW ASSEMBLIES
Lead accuracies: ± 0.004 in./ft. - Standard Rolled ± 0.001 in./ft. - Precision Rolled ± 0.0005 in./ft. - Precision Ground Standard diameters from 0.125" to 6 " (larger diameters up to 14") Standard leads from 0.062" to 1.000" Right-hand and Left-hand Alloy and Stainless Steel Screws Bronze or Plastic nut Flanges and EZZE-MOUNT™ end bearing supports are available for a complete ball screw assembly >>>
View the product on nookindustries.com NOOK INDUSTRIES
MINIATURE SELF CLINCHING NUT

MINIATURE SELF CLINCHING NUT
Available in both locking and non-locking variants in 300 series Stainless Steel in thread sizes M3 - M5. Also available in thread sizes M2 & M6 to special order. Like all self clinching fasteners they are installed using a parallel squeezing action so require access to both sides of the panel. Please note that this fastener is designed for installation into Aluminium and Steel only (Not suitable for installation into Stalinless Steel). >>>
View the product on npfasteners.com Northern Precision Ltd
KAH 45° ELBOW METRIC METAL

KAH 45° ELBOW METRIC METAL
Fitting: Specially modified polyamide 6, Thread: nickel-plated brass, Sealing: crosslinked polyester elastomer • IP69K even in dynamic applications • Self-extinguishing, free from halogens and cadmium • Excellent impact strength • Temperature range: –50°C to +105°C; Short-term: +160°C • Content of delivery: Fitting body with sealing element, thread seal PMAFIX Pro connectors are compatible with all PMA polyamide conduits irrespective of conduit profile (coarse and fine). They are ideally suited to outdoor applications above all in demanding installations in the rail transport technology and heavy machine industries. >>>
View the product on pma-uk.com PMA UK Ltd
COLOURPRO POLYTOP® PINS, NAILS, SCREWS

COLOURPRO POLYTOP® PINS, NAILS, SCREWS
Polytops ® COLOUR-PRO, are a new range of polymer headed fasteners with a 10 Year Colourfast Guarantee.The new range consists of 8 guaranteed colours, which have been developed for fixing woodgrain and foiled PVC-u fascias, soffits and bargeboards. Available in dark brown, black, mahogany, light oak, blue, green, red and white, you can specify fixings that will perform to the same standard as all major manufacturers profile giving you a completely colourfast roofline installation - guaranteed for 10 years.Ensure that you won't ever need to replace your installation by using Polytops ® COLOUR-PRO guaranteed pins, nails and screws which have been fully independently tested for colour fastness and weathering in accordance with BS2782. >>>
View the product on seac.co.uk SEAC Ltd
BUTTON CAP STAPLER

BUTTON CAP STAPLER
SENCO's BC58 Button Cap Stapler saves time and money when installing house wrap and felt paper. Drives 21 gauge 1/2" crown 5/8" staples with plastic caps in tandem. Lightweight at 4.1 lbs. and ergonomic design for comfort and ease of use. TOOL SPECIFICATIONS Height: 8.5"(216 mm) Length: 12.5"(317 mm) Weight: 4.1 lb( 2 kg) Reg. Operating Pressure: 60-95 psig (4.1-6.5 bar) Collation: Mode of Operation: Contact Actuation >>>
View the product on senco.com SENCO
AIR NOZZLES - SILVENT 011

AIR NOZZLES - SILVENT 011
SILVENT 011: a robust stainless steel nozzle. Stainless steel is necessary in applications involving e.g. high ambient temperatures, the food processing industry, or intensive mechanical nozzle wear. Noise level is halved and energy savings are considerable in comparison with "open pipe blowing". Withstands tough conditions and fulfills OSHA safety requirements limiting air pressure in direct contact with skin to 210 kPa (30 psi). Also meets EU Machine Directive noise restrictions. Patented. >>>
View the product on silvent.com SILVENT
ALUMINIUM MIG WELDER - MSK250M 250AMP

ALUMINIUM MIG WELDER - MSK250M 250AMP
MSK250M Aluminium MIG Heavy duty single phase compact MIG/MAG machine, with 4 roll industrial feed system. Features include spool gun / standard torch use, Electronic Auto Adjust for ease of set up, digital amp / volt meter, 2/4 torch latching, large robust casing, burn back and slope up control. This machine is ideal for production heavy maintenance & fabrication in Aluminium & Steel. 240 volt single phase. LIMITED STOCKS >>>
View the product on telfordgroup.co.uk Telford Group Ltd
BREAKSTEM FASTENERS - AVDELMATE™

BREAKSTEM FASTENERS - AVDELMATE™
A two-piece breakstem fastener consisting of a rivet and tubular section which provide a wide grip range, controlled clamp and a large bearing area on both sides of the application. The Avdel® Avdelmate™ rivet is a two-piece wide-grip, breakstem fastener suitable for a range of applications in soft, thin sheet and brittle materials. The Avdelmate™ fastener brand is a new extention to the Avdel® rivet portfolio that provides a targeted solution in certain niche market applications. >>>
View the product on avdel.textron.com TEXTRON FASTENING SYSTEMS LTD


< Début << Précedent 12
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Assembly