Appareils électromagnétiques (translation in progress): suppliers, wholesalers and manufacturers on Hellopro
Search   


Appareils électromagnétiques (translation in progress) :

23 products
Select the category
Selection of 23 products among 23
MOVING MAGNET CLOSED LOOP - 6200H

MOVING MAGNET CLOSED LOOP - 6200H
Galvanometer Based Optical Scanner: 6200H Moving Magnet Closed Loop Galvanometer Specifications Cambridge Technology brings you the smallest galvanometer available on the market today. Designed for applications where size is of the greatest importance the 6200H compact footprint allows the 6200H to be easily incorporated into any system without compromising space. Our 6200H can be designed and optimized for speed, size, cost and accuracy with typical beam diameters of 3mm or smaller. Designed for applications where size is of the greatest importance the 6200H compact footprint allows the 6200H to be easily incorporated into any system without compromising space. Our 6200H can be designed and optimized for speed, size, cost and accuracy with typical beam diameters of 3mm, 4mm, 5mm, 6mm, and 7mm. Mechanical Specifications Rated Angular Excursion: 40° Rotor Inertia: 0.013 gm cm2, +/-10% Torque Constant: 1.20x104 dyne cm/amp, +/-10% Maximum Rotor Temperature: 110°C Thermal Resistance (Rotor to Case): 3.8°C/Watt, Max Electrical Specifications/Drive Mechanism Coil Resistance: 2.14 Ohms, +/-10% Coil Inductance: 52 µH, +/-10% Back EMF Voltage: 20.9 µV/degree/sec, +/-10% RMS Current: 2.3 Amperes at Tcase of 50°C, Max Peak Current: 6 Amperes, Max Small Angle Step Response Time: 130 µs with 3mm Y mirror, settled to 99% Position Detector Linearity: 99.9%, Minimum, over 20 degrees, 99.5%, Typical, over 40 degrees Scale Drift: 50 PPM/°C, Maximum Zero Drift: 15 µrad/°C, Maximum Repeatability, Short Term: 8 microradians Output Signal, Common Mode: 155 µA with AGC current of 30mA, +/-20% Output Signal, Differential Mode: 12 µA/°, at common mode current of 155 µA, +/-20% >>>
View the product on cambridgetechnology.com Cambridge Technology
DICHROIC FILTERS

DICHROIC FILTERS
Galvoptics Dichroic coloured filters are available in the following standard colours.We also have large stocks of non-standard colours.All colours available for MR16, Par 16, Par 20, Par 56 & Par 64.We cut to diameters, squares, trapezoids, etc..All sizes/shapes can be custom cut to orderGalvoptics Dichroics are coated on 1.1mm Borofloat substrate as standard.Up to 450°C operating temperature >>>
View the product on galvoptics.fsnet.co.uk Galvoptics
SPINNING / FAST STEPPING ROTARY FILTER CHANGER - C104

SPINNING / FAST STEPPING ROTARY FILTER CHANGER - C104
Our six position rotary filter changer is designed for use in both photometric and imaging systems. Continuous drive is the best solution for photometric measurements, and rotor speeds from less than 4 to over 200 revolutions per second are possible with our system. The low end of this speed range also allows use with a video camera at normal frame rate. For data acquisition at still lower speeds, two or more consecutive samples can be combined together. This incurs no penalty for photometric measurements (in fact it can be very desirable when differential or ratiometric measurements are being made), but for camera measurements a longer acquisition time for each frame may be desirable. This is because the frame readout process introduces additional noise in the image, so it may be preferable to acquire single frames over a longer period instead of averaging several individual frames at normal rate. The C104 filter changer combines the benefits of precise continuous operation, with the ability to make rapid discontinuous movements from any filter position to any other. This is of particular benefit in imaging applications where rapid, stepwise filter changes are required but, the time needed for data acquisition may be variable and prolonged. The new assembly is controllable for photometric purposes, directly from switches on the front panel or by computer through our standard interface. Additional interfacing has been catered for, allowing the rotor to be programmed externally for imaging applications, or for use with other third party products. This link can be made via a 16 or 32 bit control bus using a standard 37 way D connector (details on request). A suitable control card and Windows driver DLL's are also available. The benefits of our rotary filter changer are as follows:- Continuous spinning operation at speeds from 3 up to over 200 revs/sec. Rotor speeds selectable via the on board frequency generator, or by direct synchronisation to an external source. The internal frequency generator can operate from 0 - 99.9 Hz or from 0 - 999 Hz, as required. Worst case transition times in discontinuous mode of >>>
View the product on cairnweb.com CAIRN RESEARCH LTD
CENTRIFUGE PRE-FILTER SYSTEMS

CENTRIFUGE PRE-FILTER SYSTEMS
Retrofit existing XYBEX® Systems with a pre-filter that will remove particulates before the centrifuge, thus extending the processing time between manually cleaning the centrifuge bowl. Complete packages are provided with a choice of bag or cartridge filter, interconnecting hoses, pressure regulators and gauges, and flow control valve; all mounted on a common base that sits next to your XYBEX® System. Filter systems can also be designed for specific applications or for installing on individual machine tools. >>>
View the product on masterchemical.com/eu Master Chemical Europe Ltd
EMP MODULES

EMP MODULES
· Multi-stage EMP protection in a single package · Comprise primary protection, delay choke, secondary protection, and RFI filter in a fully shielded enclosure · Replaceable transient suppression elements · Standard insertion loss performance of 60dB from 10kHz and 100dB from 100kHz- 10GHz at full load. Other performances available · Standard power line ranges from 5A - 200A · Ranges for telephone and control lines · High pulse energy capability · Laboratory and on-site tested - testing service available · Custom designs to suit application specific threat levels · Tested with NATO standard EMP pulses >>>
View the product on mpe.co.uk MPE LTD
ADSL MICROFILTER, MODEL AMF-C1-30EU

ADSL MICROFILTER, MODEL AMF-C1-30EU
ADSL Microfilter, model AMF-C1-30EU Download PDF file - Meets ETSI TR 101 728, Zcomplex1 [270ohms+(750ohms//150nF)] - Suitable for Belgium, France, Hungary, Ireland, Norway, Portugal, Spain, Sweden and Switzerland - Minimum isolation (attenuation) at 32kHz = 20dB - Line terminal and telephone terminal: both RJ11 sockets but a line cord assembly is available on request with two RJ11 plugs or one RJ11 + one RJ45 >>>
View the product on isomatic.co.uk ISOMATIC
MOVING MAGNET CLOSED LOOP - 6210H

MOVING MAGNET CLOSED LOOP - 6210H
Model 6210H Moving Magnet Closed Loop Galvanometer Based Optical Scanner Supports apertures of 3mm, 4mm, 5mm, 6mm, and 7mm. Shown here with A connecter and 3mm Y mirror. Galvanometer Specifications All Position Detector specifications apply with Cambridge Technology servo driver after a 30 second warm-up. All angles are in mechanical degrees. Consult manual for complete operating instructions. Mechanical Rated Angular Excursion: 40° Rotor Inertia: 0.018 gm cm2 , +/-10% Torque Constant: 2.79x104 dyne cm/amp, +/-10% Maximum Rotor Temperature: 110° C Thermal Resistance (Coil to Case): 2° C/Watt, Max Electrical/Drive Mechanism Coil Resistance: 3.72 Ohms, +/-10% Coil Inductance: 109 µH, +/-10% Back EMF Voltage: 48.7 µV/degree/sec, +/-10% RMS Current: 2.4 Amperes at Tcase of 50° C, Max Peak Current: 8 Amperes, Max Small Angle Step Response Time: 100 µs, with 3mm, Y mirror, settled to 99% Position Detector Linearity: 99.9 %, Minimum, over 20 degrees, 99.5% Typical, over 40 degrees Scale Drift: 50 PPM/° C, Maximum Zero Drift: 15 µrad/° C, Maximum Repeatability, Short Term: 8 microradians Output Signal, Common Mode: 155 µA with AGC current of 30mA, +/-20% Output Signal, Differential Mode: 12 µA/°, at common mode current of 155 µA, +/-20% >>>
View the product on cambridgetechnology.com Cambridge Technology
MAGNETIC ASSEMBLY

MAGNETIC ASSEMBLY
Datoyo also have ability to produce and design magnetic assemblies and magnetic systems, like Magnetic filter bar / magnetic cartridge (It is designed to get rid off iron matter on liquor then be used in various domains such as chemical industry, foodstuff industry, medicament, feedstuff industry and so on), magnetic separator, Pot Magnet, Petrol Saver and other magnetic appliance ------ Lifting Magnet and Magnetic Chuck. >>>
View the product on datoyo.com DATOYO
MOVING MAGNET CLOSED LOOP - 6215H

MOVING MAGNET CLOSED LOOP - 6215H
Model 6215H Moving Magnet Closed Loop Galvanometer Based Optical Scanner Supports apertures of 3mm, 4mm, and 6mm. Shown here with B connecter and 6mm Y mirror. Galvanometer Specifications All Position Detector specifications apply with Cambridge Technology servo driver after a 30 second warm-up. All angles are in mechanical degrees. Consult manual for complete operating instructions. Mechanical Rated Angular Excursion: 40° Rotor Inertia: 0.028 gm cm2 , +/-10% Torque Constant: 3.78x104 dyne cm/amp, +/-10% Maximum Rotor Temperature: 110° C Thermal Resistance (Coil to Case): 1° C/Watt, Max Electrical/Drive Mechanism Coil Resistance: 2.53 Ohms, +/-10% Coil Inductance: 94 µH, +/-10% Back EMF Voltage: 66.0 µV/degree/sec, +/-10% RMS Current: 4.1 Amperes at Tcase of 50° C, Max Peak Current: 20 Amperes, Max Small Angle Step Response Time: 130 µs, with 3mm, Y mirror, settled to 99% Position Detector Linearity: 99.9 %, Minimum, over 20 degrees, 99.5% Typical, over 40 degrees Scale Drift: 50 PPM/° C, Maximum Zero Drift: 15 µrad/° C, Maximum Repeatability, Short Term: 8 microradians Out Signal, Common Mode: 155 µA with AGC current of 30mA, +/-20% Output Signal, Differential Mode: 12 µA/°, at common mode current of 155 µA, +/-20% >>>
View the product on cambridgetechnology.com Cambridge Technology
MOVING MAGNET CLOSED LOOP - 6220H

MOVING MAGNET CLOSED LOOP - 6220H
Model 6220H Moving Magnet Closed Loop Galvanometer Based Optical Scanner The 6220H galvanometer can be designed and optimized for speed, size, cost and accuracy with typical beam diameters of 5mm, 8mm, 9mm, and 10mm. Shown here with B connector and 8mm mirror. Galvanometer Specifications All Position Detector specifications apply with Cambridge Technology servo driver after a 30 second warm-up. All angles are in mechanical degrees. Consult manual for complete operating instructions. Mechanical Specifications Rated Angular Excursion: 40° Rotor Inertia: 0.125 gm cm2, +/-10% Torque Constant: 6.17x104 dyne cm/amp, +/-10% Maximum Coil Temperature: 110°C Thermal Resistance (Coil to Case): 1°C/Watt, Max Electrical Specifications/Drive Mechanism Coil Resistance: 2.79 Ohms, +/-10% Coil Inductance: 180 µH, +/-10% Back EMF Voltage: 108 µV/degree/sec, +/-10% RMS Current: 3.9 Amperes at Tcase of 50°C, Max Peak Current: 20 Amperes, Max Small Angle Step Response Time: 200 µs, with 5mm Y mirror, settled to 99% Position Detector Linearity: 99.9 %, Minimum, over 20 degrees. 99.5% Typical, over 40 degrees Scale Drift: 50 PPM/°C, Maximum Zero Drift: 15 µrad/°C, Maximum Repeatability, Short Term: 8 microradians Output Signal, Common Mode: 155 µA with AGC current of 30mA, +/-20% Output Signal, Differential Mode: 11.7 µA/°, at common mode current of 155 µA, +/-20% >>>
View the product on cambridgetechnology.com Cambridge Technology
MOVING MAGNET OPTICAL POSITION DETECTOR SCANNER - 6800HP

MOVING MAGNET OPTICAL POSITION DETECTOR SCANNER - 6800HP
Model 6800HP Moving Magnet Optical Position Detector Scanner Supports 3 mm apertures Galvanometer Specifications All Position Detector specifications apply with Cambridge Technology servo driver after a 30 second warm-up All angles are in mechanical degrees. Consult manual for complete operating instructions. Mechanical Rated Angular Excursion: 40° Rotor Inertia: 0.018 gm*cm2, +/-10% Torque Constant: 2.5X104 dyne-cm/amp, +/-10% Maximum Coil Temperature: 110°C Thermal Resistance (Coil to Case): 4.0°C/Watt, Max Electrical/Drive Mechanism Coil Resistance: 4.2 Ohms, +/-10% Coil Inductance: 96uH, +/-10% Back EMF Voltage: 0.04mV/degree/sec, +/-10% RMS Current: 1.6 Amperes at Tcase of 50°C, Max Peak Current: 6 Amperes, Max Small Angle Step Response Time: 0.3ms, with balanced load Position Detector Linearity: 98%, Minimum, over 30 degrees Scale Drift: 0.05 %/°C, Maximum Zero Drift: 0.01 degrees/°C, Maximum Repeatability, Short Term: 20 microradians Output Signal, Common Mode: 50 microamperes with AGC current of 20mA, +/-20% Output Signal, Differential Mode: 3.2 uA/degree, at common mode current of 50 uA, +/-20% >>>
View the product on cambridgetechnology.com Cambridge Technology
LOW COST SINGLE STAGE ADSL MICROFILTER, MODEL KE-RT13

LOW COST SINGLE STAGE ADSL MICROFILTER, MODEL KE-RT13
Low Cost single stage ADSL Microfilter, model KE-RT13 Download PDF file - Meets ITU-T G992.2, 600 ohms - Suitable for USA, Pacific rim, Bolivia, Cyprus, Czech Republic, Ecuador, Egypt, Finland, Greece, Iceland, Luxembourg, Netherlands, Pakistan, Poland, etc. etc. - Minimum isolation (attenuation) from 25 to 50 kHz = 15dB - Line terminal: RJ11 socket, telephone terminal: RJ11 plug on Pig Tail >>>
View the product on isomatic.co.uk ISOMATIC
TWO STAGE ADSL MICROFILTER, MODEL KE-RT08

TWO STAGE ADSL MICROFILTER, MODEL KE-RT08
Two stage ADSL Microfilter, model KE-RT08 Download PDF file - Meets ANSI T1.413 and ITU-T G992.1 Annex E Type2, 600 ohms - Suitable for USA, Pacific rim, Bolivia, Cyprus, Czech Republic, Ecuador, Egypt, Finland, Greece, Iceland, Luxembourg, Netherlands, Pakistan, Poland, etc. etc. - Minimum isolation (attenuation) from 30 to 300 kHz = 65dB - Line terminal: RJ11 socket, telephone terminal: RJ11 plug on Pig Tail >>>
View the product on isomatic.co.uk ISOMATIC




  Search    
 
 
 
Search
See all of the sector's products : Electricity/Electronics