Air processing: suppliers, wholesalers and manufacturers on Hellopro
Search   


Air processing :

100 products
Select the category
    Selection of 40 products among 100
    DRYER DSE SERIES, DSS SERIES AND DHD SERIES H

    DRYER DSE SERIES, DSS SERIES AND DHD SERIES H
    Durability and economy are requirements for most common industrial heatless drying applications. DSE, DSS and DHD Series industrial grade dryers deliver consistent performance and reliability with dew points to -100°F. AccuShift™ non-lubricated switching valves with one moving part Application engineered Series designs ISO 8573.1 Moisture Class 1, 2, 3 and 4 NEMA 4 rated electrics ASME and CRN registered pressure vessels Pre-mounted prefilter and afterfilter (other mounting options available: duplex, block and bypass valves) >>>
    View the product on pneumaticproducts.com/home.htm Pneumatic Products Groupe - SPX Air Treatment
    BLOOD BANK REFRIGERATOR - BL-176

    BLOOD BANK REFRIGERATOR - BL-176
    In accordance to DIN 58371 • Automatic defrosting • Re-circulating air-cooling • Melt water evaporation • Temperature gear by electronic thermostat • Key switch protected control panel • Minimium/Maximum temperature memory • Safety control device prevents freezing • Optical and acoustic warning system also during power failure • Potential free contact / interface RS485 • Door hinge changeable • 2 drawers >>>
    View the product on kirsch-offenburg.de Philipp Kirsch
    BLOOD BANK REFRIGERATORS MINI, HB, BB, BBP SERIES

    BLOOD BANK REFRIGERATORS MINI, HB, BB, BBP SERIES
    Structure. Zinc-plated steel sheet body, prime coated in white for MINI and BB series models; modular prefab zinc-plated steel sheet and white prime coated panels for BBP series models. Blue-coloured upper band. Internal AISI 304 stainless steel lining is provided for BB series models. Thermal Insulation: By high pressure-injected polyurethane foam ("sandwich" technique). Service Doors: Made of special anodized aluminium parts with triple vacuum glass and anti-condensation resistors to prevent frost. Magnetic closing system with odourless rubber seals. Opening handles made of light chrome alloy and plastic contours. Lock with external keys. Drawers: For keeping blood packs, made of stainless steel, provided with stainless steel guide bars and plastic wheels. The front end of the drawers is made of plexiglass for immediate control of contents and to prevent heat entry when opening service doors. Upon request, appropriate transparent PVC separators can be set inside each drawer for inclined positioning of the packs and easy reading of labels. The separators can be adjusted or removed for other eventual use of the drawers. On the front end of each drawer special plastic label holders are fixed to indicate the content of each drawer. Cooling System: Completely air-tight, fixed on the bottom part of the cabinet of the MINI series models and on the top part of the other models. It comprises particularly silent air-tight compressor and ventilated air-circulation condenser. Copper tubing evaporator with aluminium cooling fins, helical or axial electric fans. Internal Lighting: With incandescent or fluorescent light bulbs; on/off commanded by door opened and appropriate switch on control panel. Equipment: internal ventilation; adjustable feet on enbloc models; installation on rollers for enbloc BB series ; condensate water collection tray, comprising heating system for the disposal of the same on enbloc models; micro electronic command and control system, model E2003 ® (digital readout); min./max. temperature alarm system with automatic charge accumulator; prearranged for RC alarm signal repetition; electronically commanded electric defrost system; battery-operated graphic temperature recorder; door with inspection window and lock; weekly circular diagram; printing cartridge with adjustment command. >>>
    View the product on angelantoni.it Angelantoni Industrie
    PNEUMATIC SYSTEMS

    PNEUMATIC SYSTEMS
    The development and production of sophisticated assemblies and systems in fluid and drive technology constitutes a focus of the Specken-Drumag group. Our longstanding experience in pneumatics and hydraulics is an advantage for customers seeking solutions off the beaten track. We have developed systems offering a competitive edge in engineering and productivity in close cooperation with our customers. This is particularly true for our pneumatic proportional technology and its broad field of application. Anyone looking for a solution to change a position variable via control signals should turn to us. Our vast range of pneumatic drives, valves and accessories and our experienced development department enable us to find an effective solution to every problem. RP1000 Pressure controller for high-pressure applications with a connection size of 2” and a nominal width of 40mm. The controller’s unique secondary relief of 1 1/4 “ enables fast venting of the secondary side. Areas of use include stretch blow machines for the production of PET bottles. Speed control of an air motor. Speed is recorded directly on the motor and serves as the actual value for the controller. Changes of load on the output shaft with resulting speed changes are recorded as deviations from the setpoint value and compensated by the controller. The motor maintains the speed specified by the setpoint. System consisting of the position controller RS100, a ball valve with double-acting drive and the external actual-value encoder RG100. The lever enables closing of the ball valve even in the case of failure of the compressed air supply. “The ball valve closed” position is monitored via a switch. The system is used for product-dependent dosing in process engineering. >>>
    View the product on ribapneumatic.de RIBA SPECKEN DRUMAG
    CONSTRUCTION EQUIPMENT

    CONSTRUCTION EQUIPMENT
    The needs of the construction industry for compressed air products are diverse, and often very specialised. With many years of experience in this sector, Air Power Products has built a portfolio of products and services designed to ensure that you don't have to think twice about who can meet your needs. Vibration Monitoring Hoses 1/14" to 6" Air Water-Grout Pumps Breakers - Rock Bursters, Air/Hydraulic >>>
    View the product on airpowerproducts.co.uk Air Power Products
    ELECTRIC HYDROCARBON 007EL

    ELECTRIC HYDROCARBON 007EL
    007EL electric hydrocarbon refined product probe sampler Electrically actuated probe sampler suitable for sampling homogeneous refined products in pipelines. Available with a 2” ANSI 150 flange or 1¼” NPT mounting, the 007 has a high grab rated facilitating the collection of a representative samples of small batches. The 710EL is available with an ANSI 150 pressure rating and Class 1, Div 1 or EExd IIB T4 certification. >>>
    View the product on jiskoot.com Jiskoot Autocontrol Ltd
    PCL AIR TREATMENT - 1/4

    PCL AIR TREATMENT - 1/4" FILTER
    1/4" Air Treatment The PCL air treatment series is a complete range of FRL's including combination units with 1/4" and 1/2" inlet ports. Featuring polycarbonate bowls with protect metal surrounds. 1/2" units have a maximum inlet pressure of 14bar. All the filters are manual/semi-automatic drains. Units are supplied complete with wall brackets and pressure gauges. Integral 1/4 port Manual/semi-automatic drain Maximum inlet pressure 12bar 10 micron filter Complete with wall bracket Part Number Description ATF6 Filter - manual/semi-automatic drain >>>
    View the product on pcl.org.uk Pneumatic Components Ltd
    PRESSURE STABILIZERS - 1/2” BSP M/M

    PRESSURE STABILIZERS - 1/2” BSP M/M
    Small aluminum stabilizer specially designed for medium-sized appliances and applications of up to 40,000 Kcal/h This is a pressure stabilizer made of injected aluminum, very high temperature and aging resistant membrane, and stainless steel spring. It is specifically applied to medium-sized appliances and applications of up to 40,000 Kcal/h, such as stoves, water heaters, tank water heaters and boilers. All the regulating devices are electronically monitored and calibrated to ensure 100% of imperviousness, flow and calibration of the output pressure to the burner. >>>
    View the product on tonkasa.com.ar Tonka
    REFRIGERATOR - RESIDENTIAL

    REFRIGERATOR - RESIDENTIAL
    Residential Cold Control strives to meet each individual customer’s requirements by offering a full range of refrigeration solutions from the world’s leading manufacturers who’s equipment incorporates cutting-edge designs whilst meeting the latest energy, environmental, HACCP and food safety legislation. In having these ideals we are naturally sought after by the top names in the industry as agents for their products. Not only can we supply Refrigerators, Freezers, Ice Machines and Display Cabinets for food, drink and patisseries, we also design and supply the increasingly popular made to measure Wine Coolers and Larder type walk-in coldrooms, specifically for the kitchens of mid to large sized homes. Such designs include lighting and shelving to suit the application. All wine lovers know that wine is fragile; it needs careful attention and storage to reach its full potential. Cold Control can offer solutions for all your wine storage and serving requirements from bespoke wine cellars to freestanding wine cabinets. The benefits you can look forward to: Constant temperature – maintaining the optimum of 9° – 14’°c Controlled 60-70% humidity Ecological and efficient refrigeration systems >>>
    View the product on coldcontrol.co.uk Cold Control Services Ltd
    HEAT REACTIVATED DRYER - E2DA-2E

    HEAT REACTIVATED DRYER - E2DA-2E
    ENERVAC's Type 2E Dryers consist of two identical pressure chambers filled with desiccant and an external heater for continuous removal of water vapour from compressed air or gases to -40°F (-40°C) dew point or lower. They are capable of processing gas, from 0-100% of the design inlet flow rate, without adjustment. Continuity in the drying process is achieved by switching from one chamber to the other. While one chamber is used for drying, the other is reactivated by a heating and cooling period, with a small dry air purge flow, to assure total regeneration. >>>
    View the product on enervac.com Enervac
    CYLINDER PRESSURE REGULATORS - CONSTANT 2000 / TORNADO

    CYLINDER PRESSURE REGULATORS - CONSTANT 2000 / TORNADO
    Cylinder pressure regulators for technical gases Design: Single stage and double stage versions Inlet pressures up to 200 bar and 300 bar Special regulators for high flow rates Available with DIN, CEN, BS and CGA connections Advantages: Extremely high reliability due to central micro filter Complete control by excellent visibility of the pressure gauges Outlet pressure limiter with double security Ergonomical handling and easy operation due to special shape of the hand wheels Product Range: Pressure regulators for oxygen Pressure regulators for acetylene, propane, MAPP Pressure regulators for hydrogen, methane, town gas, forming gas Pressure regulators for argon a.o. inert gases, mixed gases, CO2 Pressure regulators for nitrogen Pressure regulators for compressed air Pressure regulators for test gas, carbon monoxide, nitrous oxid Accessories, wearing parts >>>
    View the product on messer-cw.com Messer Griesheim
    STENOPAC 2000 ADSORPTION DRYERS

    STENOPAC 2000 ADSORPTION DRYERS
    The new adsorption dryer Drying of small and medium volume flows especially require an economical solution. required are dryers, which distinguihed features are low investment and running costs. The new adsorption dryer STENOPAC 2000 makes the advantages of big dryers also for small and medium volume flows available. The STENOPAC 2000 is equipped with pre- and after filters and with the electronically level controlled drain. Guaranteed pure, dry and oilfree compressed air - and no loss of compressed air from condensate drainage. All components of this compact construction, pre- and after filter included, are accommodated in one attractive housing of eloxy aluminum and high-quality glass-fibre enforced plastic protected against dirt and damage. >>>
    View the product on stenhoj.dk/compressor/ STENH? Groupe - STENH?
    FUEL (GH2) CONTROL VALVES:PRESSURE REGULATOR

    FUEL (GH2) CONTROL VALVES:PRESSURE REGULATOR
    The Aerodyne GH2 pressure regulator (part #10257) is a two stage design consisting of a balanced poppet at the first stage and an unbalanced poppet at the second stage. Inlet gas is reduced to approximately 300 psig at the outlet of the first stage. The first stage is also equipped with a safety relief that is activated at 375 psig. The second stage reduces pressure to 145 psig at the outlet. The second stage is also equipped with a relieving mechanism that is activated at 174 psig. Characteristics: * Fluid: GH2 * Inlet pressure range: 220 psig to over 10,000 psig. * Outlet Pressure: 145 psig * Flow range: 0 to 3 g/s (75 scfm) * Operating temperature: -40°F to + 185°F (-40°C to 85°C) * Material: 316 cres >>>
    View the product on aerodyne-controls.com Aerodyne Controls Groupe - CIRCOR
    AIR TREATMENT

    AIR TREATMENT
    When high quality clean dry compressed air is a process or project requirement, Airpac Bukom can provide a range of desiccant dryers sized to meet their prime compressor fleet. Either on wheels or mounted in a certified lifting frame for transport and protection, Airpac Bukom's range of desiccant dryers are a complete package, incorporating: • A twin tower heatless adsorbent dryer unit • Double oil removal filtration with auto drains and final dust filter. >>>
    View the product on airpac.co.uk Airpac Bukom Oilfield Services
    REFRIGERANT DRYERS DB 1 TO DB 275

    REFRIGERANT DRYERS DB 1 TO DB 275
    Constant dewpoint of +3°C in every operating phase, 0-100% flow capacity Consistent high quality compressed air Low pressure differential Continually saving costs by matching drying capability to demand High separation efficiency of the heat exchanger Can be installed behind compressor without need of cyclon separator Energy saving,automatic condensate drain Operates economically with no compressed air loss Ozone friendly R 134a refrigerant gas throughout entire range Minimised refrigerant charge Asolutely ozone safe Environmentally friendly Large heat exchanger surface area. Pressure dewpoint of +15°C is possible. Maximum abient temperature of +50°C. Maximum inlet temperature of compressed air +60°C Built-in reserves protects against production peaks >>>
    View the product on boge.com BOGE
    COLD-MASS™ - CYCLING REFRIGERATED AIR DRYER

    COLD-MASS™ - CYCLING REFRIGERATED AIR DRYER
    YOUR SOLUTION FOR PEAK OPERATIONAL EFFICIENCY: * Patented refrigeration system allows for the use of a fully active evaporator, resulting in the coldest (driest) air possible * Digital readout of the lowest air temperature is prominently displayed on the control panel * Maestro-DriSM Controller with RemoteWatchTM allows the user to monitor from any PC every detail of operation including all alarms (Standard on Cold-Mass 4000 and larger - Optional for 1000-3000) * Loadless starting of the refrigeration compressor eliminates concern over the number of stops and starts * Grooved tube sheets to provide reliable, leak-proof joints and greater mechanical strength * Direct dew point sensing and control * Automatically adjusts to constantly changing operating conditions BENEFITS: * Clean, dry, and oil-free air * Guaranteed performance regardless of demand * Premium air quality — Energy efficient — Simple to Operate * Unsurpassed warranty including 5-year package and 10-year heat exchanger warranty AIR QUALITY GUARANTEE: Every product purchase comes complete with Cameron's Compression Systems Air Quality Guarantee. >>>
    View the product on coopercompression.com Cooper Compression
    AIR REGULATOR

    AIR REGULATOR
    When an air pump has product in it, the loading of the diaphragm is balanced on the air and liquid sides. But when the pump is empty and the liquid pressure is nil the pump runs excessively fast causing mechanical stress to the diaphragms and early failure. The regulator should be fitted to the line and preset approximately 10 PSI higher than the required pumping pressure, this ensures minimum damage in the event of extensive dry running. The regulator is often incorrectly used for flow control, this is unsuitable due to possible changes in Head Loss caused by altering viscosity, affecting the flow rate up or down and also this usually means the air pressure is set too close to the operating pressure causing regular stalling. >>>
    View the product on diaphragmpumps.co.uk Diaphragm Pumps Ltd
    SERIES 842 AIR HORNS

    SERIES 842 AIR HORNS
    For use with HNL’s single and multi-point annunciators or any application where a pneumatic audible alarm is required. CHOICE OF 5 FREQUENCIES 118 dB(A) OUTPUT READILY AVAILABLE The Series 842 Air Horn uses a vibrating brass diaphragm together with a thermoplastic (or die-cast aluminium) trumpet to provide a sound output of 118dB(A) at 1 metre from the horn. Sound levels fall by 6dB(A) each time the distance from the horn doubles (e.g. 112dB(A) @ 2m, 106dB(A) @ 4m, etc). Different frequencies are available enabling different alarms to be identified by its own unique sound. Alternatively a two tone effect can be achieved by alternating between two different horns, using HNL’s horn modulator DS1054. >>>
    View the product on hnl-uk.com HNL Instruments & Controls Ltd
    3500 SERIES FILTER REGULATORS

    3500 SERIES FILTER REGULATORS
    316 stainless steel for the offshore, food, pharmaceutical and allied industries. A combination unit for filtration and pressure regulation of compressed air for use in these industries. 316 Stainless steel throughout. Large flow paths minimise pressure drop. Integral mounting holes. Tagging facility built in. Filter Unit Large 25 micron standard element with manual or automatic drain for the removal of liquids and solids. 5 micron element option available. >>>
    View the product on midland-acs.com Midland -ACS Groupe - IMC
    EASYPRESS / MAXI EASYPRESS - PRESSURE CONTROLLERS

    EASYPRESS / MAXI EASYPRESS - PRESSURE CONTROLLERS
    Easypress controllers are electronic pressure switches with integral dry running protection and non-return valve. They will start a pump immediately when a valve in the pipe system is opened and stop the pump immediately when the valve is closed, or if the pump runs dry. They can be fitted directly to any surface mounted pump, or in the delivery line of any submersible that operates within the rated pressure and flow specifications. Suitable for pumps with 230v motors that do not exceed 1.5kW. >>>
    View the product on obartpumps.co.uk Obart Pumps Limited
    AIR PREPARATION UNITS - (FILTERS, REGULATORS, LUBRICATORS)

    AIR PREPARATION UNITS - (FILTERS, REGULATORS, LUBRICATORS)
    AIR PREPARATION UNITS (Filters, Regulators, Lubricators) The use of line conditioning units, while not always necessary, will generally improve the performance and extend the life of valves and other downstream components. Filters, regulators and lubricators are available as individual units or as combinations in modular design. You may choose from four different series. Port sizes range from G 1/8 through G 2. A broad line of accessories is also available. >>>
    View the product on rosseuropa.com ROSS EUROPA
    OIL MIST EXHAUST FILTERS

    OIL MIST EXHAUST FILTERS
    Safely remove exhaust air from vacuum pumps and systems with air streams less than 200°F Feature dependable steel construction with plated finish Wrapped fiber glass elements with polyester cloth trap media nominally 99.97% @ 0.3 micron Easy thumbscrew access for maintenance ISO flange fittings of mild steel with 32 RMS finish provide optimal sealing Special connections and sizes available These Oil Mist Exhaust Filters provide safe, effective isolation of oil mist and other contamination from a gas stream in pumping operations. Rated 99.97% effective with media down to 0.3µm in diameter, they make oil-lubricated pumping systems suitable for most cleanroom applications. >>>
    View the product on terrauniversal.com Terra Universal
    GLASS-LINED DRYERS - ROTARY DRYERS RDO

    GLASS-LINED DRYERS - ROTARY DRYERS RDO
    Glass-lined dryers This series comprises a standard range of double-cone rotary dryers, of glass-lined steel, constructed in 7 sizes, from 160 to 6300 litres nominal capacity. Special sizes up to 12500 l. can be supplied. The double-cone construction, characteristic of these dryers, makes possible the mixing and drying, of solid products, as well as their final discharge for packing, with numerous advantages compared with other, conventional, equipment: - Considerable reduction of working times due to a thorough and fast mixing of the product (that is subjected to a real circulatory motion inside the unit) and the constant renewal of the surfaces of contact for heat transfer and of evaporation. - Smooth, silent running because of the limited movement of the centre of gravity of the rotating mass. - Fast gravity- loading and discharge. Complete discharge is assured by the absence of corners and dead zones and can be direct into containers for shipment. In addition, the glass lining provides the following advantages: - Protection of the product, from impurities, contamination and changes, due to the extremely smooth inert surfaces of the vessel. Hence particularly costly and delicate substances like pharmaceuticals, catalysts, dyes and pigments, resin etc. can be mixed and dried without problems. - The elimination of incrustation and deposits on the walls of the vessel. In this way heat transfer and the quality of the end product are improved. - The possibility of changing the type of product frequently and almost without limitation, because of the ease and speed of cleaning and degassification and the resistance to corrosion by virtually any substance. Constructional features Double-cone dryer made up of two truncated cones welded at the larger diameters to a short central cylindrical shell. A charging nozzle is located at the top of the unit, and a discharge nozzle at the bottom. Each of these is equipped with a clamped cover and protection ring. Gaskets are of the PTFE envelope type with a stainless steel insert. The heat necessary for drying is provided for by an external jacket. Design data Pressure: -1 to +6 bar Temperature: -25 to +200 °C Design and calculation codes VSR/ISPESL, AD-MerkbIätter/TÜV, SVTI, ASME VIll div.1, BS 5500, CODAP/ DRIRE, Stoomwezen, SA or CE stamp (PED). >>>
    View the product on tycontechnoglass.com Tycon technoglass Groupe - Robbins & Myers
    DRYER ESR SERIES - HIGH-VOLUME REFRIGERATED

    DRYER ESR SERIES - HIGH-VOLUME REFRIGERATED
    ESR Series (4,000 - 12,000 scfm) ESR Series Refrigerated Dryers optimize energy savings and are ideal for applications where plant air demands change frequently. The refrigeration compressor is turned on-and-off or "cycled" as needed to maintain adequate cold energy reserves for use on-demand. Dew points from 33°F - 39°F provide dry compressed air and maximum energy savings. Environmentally friendly "NO CFC" refrigerants and durable semi-hermetic refrigeration compressors for long life Fully automatic cycling refrigeration control systems provide maximum energy savings and the low dew points under all rated design conditions Non-clogging automatic condensate drain valves for fast, reliable condensate removal Rugged structural steel frame construction for component protection and system integrity >>>
    View the product on pneumaticproducts.com/home.htm Pneumatic Products Groupe - SPX Air Treatment
    CUBE 38 FRL COMBINATION

    CUBE 38 FRL COMBINATION
    Max. primary pressure: Transparant bowl with bowlguard 12 Bar /170 PSI Temperature: 0-60° C Bowl volume: 40 cc Effective bowl volume: 70 cc Filter: 5 my Material: Housing: Aluminium Bowl: Polycarbonate Bowlguard: Polyamid Top cover: Glassreinforced polyamid Filterelement: Plastic Other parts: Nitrile rubber - brass Extra information The Cube 38 series is designed for tool applications where in particular attractive prices are the issue. >>>
    View the product on cubeair.com Cubeair
    BLOOD BANK REFRIGERATOR - BL-300

    BLOOD BANK REFRIGERATOR - BL-300
    In accordance to DIN 58371 • Automatic defrosting • Re-circulating air-cooling • Melt water evaporation • Temperature gear by electronic thermostat • Key switch protected control panel • Minimium/Maximum temperature memory • Safety control device prevents freezing • Optical and acoustic warning system also during power failure • Potential free contact / interface RS485 • Interior light with door contact switch • Door hinge changeable • 4 drawers >>>
    View the product on kirsch-offenburg.de Philipp Kirsch
    RM100 PRESSURE REGULATOR

    RM100 PRESSURE REGULATOR
    Master precision regulator 1/8" or 3/4" to 2" connections with booster The RM100 serves for regulating static pressures or as a master controller for our boosters. The boosters are available in various sizes. They enable precise control of volume flows up to 2700 m3/h. In spite of its high performance in combination with the booster, the RM100 forms a compact unit in a small-sized housing. >>>
    View the product on ribapneumatic.de RIBA SPECKEN DRUMAG




      Search    
     
     
     
    Search
    See all of the sector's products : Hydraulics - Pneumatics