Selection of 40 products among
40
ENERGY ANALIZER - VIP396
Description
VIP 396 is a 96x96mm multifunctional panel meter, ideal for the measurement and display of electric parameters.
The large clear LED displays showing parameters and values are easily
read under all lighting conditions.
The instrument displays up to 28 parameters (see table) and is suitable for installation on unbalanced threephase systems or twophase and singlephase systems.
Supply and measurement connections are via sturdy 2.5 mm2 terminals and with 5A secondary CTs for current measurement.
Technical specifications
Maximum size (mm): instrument: 96 x 96 x 115.4 - Cut-out template: 91 x 91
Power supply: from network 230 V ~ or 115 V ~ ± 10% @ 35 - 400 Hz (4 VA)
Display: Seven-segment 13 mm red LED’s, 3 digit on 3 lines
Voltmeter inputs: VL1, VL2, VL3, N up to 350 V ~ phase-neutral, 600 V ~ phase-to-phase, 35÷400 Hz.
Voltmeter input impedance: 2 M
Voltage input overload: max 850 V ~ phase-neutral
Amperometric inputs: AL1, AL2, AL3, COM. Consumption 1 VA.
Three /5A external current transformer required
Amper. input overload: max 7 A ~ permanent. 50A for 1 second.
Number of scales: 1 voltage scale, 2 current scales
Measurements: T.R.M.S. (true effective value) up to 24th harmonic (50 Hz), 20th (60 Hz)
Precision: 1% reading per V and I; 2% for Power
Suitable for connection to: Single phase or Three phase Star, Three phase Delta, or Diphase systems
Weight: 0.6 Kg
Protection level: instrument IP20, front panel IP30
Ambient temperature range: -10°C ÷ + 60°C
Relative humidity range (R.H.): from 20% to 80%. Condensation not permitted.
Models
• Vip396: basic unit
• Vip396 485: RS485 serial port, protocols: MODBUS ASCII, BCD and IEEE.
• Vip396 485 4-20mA: RS485 serial port and 2 analog outputs 4-20mA or 0-20mA
• Vip396 485 ALM: RS485 serial port and 2 relay outputs for alarms/pulses/relay
• Vip396 LON FTT10: Lonworks protocol and FTT10 interface and relay output.
For the LON model the exportable measurments are 22, to be chosen among the following:
Threephase voltage
Threephase current
Threephase power factor
Threephase active power
Threephase reactive power
Threephase apparent power
Average active energy
Average reactive energy
Average apparent energy
Active energy
Reactive energy
Frequency
Voltage L1
Voltage L2
Voltage L3
Neutral current
Current I1
Current I2
Current I3
Active power L1
Active power L2
Active power L3
Applications
VIP 396 is a cost-efective instrument which can conveniently replace many traditional analog instruments in a very small space, simplifying wiring and with superior performances for both accuracy and reliability.
Accuracy of measurements is guaranteed even for highly distorted waveforms, a critical issue for traditional instruments.
>>>
View the product on elcontrol-energy.net
ELCONTROL
ELECTRONIC PERSONAL DOSIMETERS IN CREDIT CARD SIZE DOSICARD - DOSIMAN
Features
Stand-alone electronic dosimeter with LCD display, large non volatile memory and programmable alarm levels on doses and dose rate
Ultra thin/compact - light weight - shockproof - low cost
Measures the X/g dose equivalent Hp(10) according to ICRU 39
Meets the latest regulations regarding the EMI compatibility - CE type approval
Keystone of complete unique operational dosimetry systems
Description
With its credit-card size, DOSICARD features the smallest electronic dosimeter available on the market.
It is also one of the most technologically advanced. It provides real time monitoring of the personal dose and dose rate. DOSICARD is the key element within a unique operational dosimetry system that can be tailored to your specific applications. DOSICARD addresses all workers exposed to a radiological risk in nuclear facilities, research and medical centers, and the nuclear industry. Therefore, it is of outstanding performance in the ALARA strategy of minimizing received doses.
The DOSICARD badge is your radiation surveyor. It keeps you informed in real time of the radiation rate, allowing immediate reaction in case of radiation occurrence, thus drastically reducing the exposure to nuclear radiation.
DOSICARD can also be part of a system: from nuclear laboratories of a few persons to nuclear facilities of several thousand workers, Dosemanager II and CARD Systems allow easy operation, and database management for efficient operational dosimetry monitoring.
DOSICARD can display either Sv or rem, selection being made by the user in Dosemanager II. DOSIMAN can be delivered with either Sv or rem display (factory set).
DOSICARD - Efficient and easy-to-use
DOSICARD features a silicon detector, complete analog and digital circuitry, including a microcontroller with large non-volatile memory, a LCD display and audio and visual alarms.
Three touch buttons allow programming and display setup of the current dose, dose rate and cumulative doses per day/month/quarter/year/five years.
Non-volatile EEPROM memory safely stores the detailed history of the daily doses, times when alarm levels have been exceeded, as well as relevant data concerning the user and the badge itself.
DOSICARD - Operational dosimeter
Visual and audible alarms are generated as soon as a predefined threshold is exceeded on doses or dose rate.
Only three buttons are necessary for daily use.
Permanent or temporary display of current dose or dose rate values are available on the easy-to-read LCD screen. The direct access by the user to month/quarter/year/five year cumulative doses is protected by confidential password.
DOSICARD - Compact and convenient
Credit card format, 8 mm thick.
Long battery life: typical 3000 hours.
Transparent vinyl protective pocket with clip. Easy and low cost replacement in case of contamination.
DOSICARD - Simple and powerful
Two operating modes are provided: Permanent (continuous integration of doses) and Zone (integration of doses only within control zones, with operation controlled by entrance/exit badge readers).
A large memory capacity enables storage of detailed dose history including:
Dose accumulation modes:
Daily: dose accumulated since midnight.
Manual periodical: dose accumulated since manual start.
Last 90 daily doses, last 60 monthly doses, month/quarter/year/five year cumulative doses.
Such dose history can be accessed via a badge reader and is protected by a confidential password.
Safe storage is guaranteed via a non-volatile EEPROM memory for 10 years without battery.
DOSICARD - Multiple applications
Monitoring personnel in controlled zones: nuclear research centers and laboratories, reprocessing plants, companies handling radioactive sources, etc.
Dosimetry management in the biomedical domain (Nuclear Medicine, Cobaltotherapy, etc.).
Individual survey in the vicinity of nuclear facilities, uranium mines, granitic grounds, high altitude sites, etc.
Follow-up of aircraft crews.
>>>
View the product on canberraeurisys.com
Canberra Eurisys
ENERGY ANALYZER - DMM3
Description
DMM3 is a 9 DIN modules multifunctional panel meter, ideal for the measurement and display of electric parameters.
The large clear LED displays showing parameters and values are
easily read under all lighting conditions.
The instrument displays up to 28 parameters (see table) and is suitable for installation on unbalanced threephase systems or twophase and singlephase systems.
Supply and measurement connections are via sturdy 2.5 mm2 terminals and with 5A secondary CTs for current measurement.
Technical specifications
Max dimensions (mm): instrument: 158.5 x 73 x 90.
Power supply: from network 230 V~ or 115 V~ ± 10% @ 35 - 400 Hz (4 VA)
Display: LED 7 segments 13 mm red, 3 x 3 numeric digits on 1 line.
Voltmeter inputs: VL1, VL2, VL3, N up to 430 V~ phase-neutral, 600 V~ phase-phase, 35¸ 400 Hz.
Voltmeter inputs impedance: 2 Mohm
Voltmeter inputs overload: max 850 V~ phase-neutral
Amperometric inputs: AL1, AL2, AL3, consumption 1 VA. Three external /5A curr. trasf. necessary
Amperometric inputs overload: 7A permanent, 50A for 1 second.
Number of scales: 1 voltage scale, 2 current scales
Measurments: T.R.M.S. (true root mean square) up to the 25th harmonic (50 Hz), 20th (60Hz)
Accuracy: 1% of reading for V and I; 1% for power
Suitable for connection to: Singlephase or Threephase Star / Delta or Twophase systems
Weight: 0.6 Kg
Protection level: instrument IP20, front panel IP40
Ambient temperature range: -10°C ¸ + 60°C
Relative humidity range: from 20% to 80%.
Condensation: not permitted
>>>
View the product on elcontrol-energy.net
ELCONTROL
ENERGY ANALYZER - VIP96
Description
Vip 96 is a 96x96mm digital energy analyzer for panel mounting, suitable for monitoring and controlling industrial and civil loads.
The instrument performs at the same time 7
measures displaying the values on a backlit LCD display.
The measured parameters are:
Volt (rms), AMP (rms), P.F., kW, kVAr, kVA, Hz.
The instrument provides also active and apparent power peak values averaged on a 15 minutes integration time (versions with 10, 20 or 30 minutes integration times available).
Technical specifications
Inputs:
Voltage: Singlephase (L1-N) max 750Vrms from 20 to 600Hz. Threephase (L1-N) max 750Vrms from 20 to 600 Hz.
Current:: 5A from 20 to 600 Hz.
Voltage inputs overload: Max 825 Vrms. Voltage peak 900Vrms
Current input overload: 5 times Full Scale value (protection mechanism triggered by limit value)
Number of scales: 3 voltage scales; 3 current scales.
Automatic scale change: response time: 500ms. Change to upper scale occurs at 105% of the active scale. Change to lower scale occurs at 20% of the active scale.
Dimensions: 96x96x130 mm.
Weight: 1 Kg.
Protection level: instrument IP20, front cover IP30.
Test and operating conditions:
Operating ambient conditions: temperature range: from -10‹C to +50‹C. Relative humidity range: from 20% to 80%.
Storage temperature: from -20‹C to +60‹C.
Condensation: not permitted
Insulation resistance: 500 MĦ between input connectors and case
Insulation voltage:
between input connectors: tested at 2000Vrms 50Hz for 60 seconds.
between input connectors and case: tested at 3000Vrms 50hZ for 60 seconds.
Reference standards: IEC 348 class 1 for operating voltages lower than 650VACrms. VDE0110 group C for operating voltages below 500VACrms.
Shock resistance: 10g
Vibrations resistance: 10-55Hz (amplitude 0,5mm)
Power supply:
From network: 100€120/200€240V~10%
Consumption: 3,5VA
>>>
View the product on elcontrol-energy.net
ELCONTROL
ENERGY ANALYZER - VIPENERGY
Description
TOP PERFORMANCES IN A SMALL SPACE
• 43 measures in 157,5mm DIN rail (9 DIN modules)
Measurements on distorted and unbalanced systems.
• Display with backlight
• Easy to install
and operate
• All options can be programmed on the field
• Signal outputs: versions with different configurations available for expanding the use of VIP ENERGY to industrial control applications.
POWER MEASURES WHERE AND HOW YOU WANT THEM
• WHERE: Installation on any modular panel
• HOW: The measures provide a full view of electrical consumption and power peaks.
COGENERATION PLANTS
All models can be set to COG4 mode, which makes it possible to monitor energy consumption and generation on 4 quadrants.
Technical specifications
General Specifications
Voltmeter Inputs: L1-N, L2-N, L3-N max 550 Vrms (STAR connection);
L1-L3, L2-L3, L1-L2 max 550 Vrms (DELTA connection) from 20 to 600 Hz.
Current Inputs: 5A from 20 to 600 Hz.
Voltage Inputs overload: peak voltage 2000 Vrms (60 seconds).
Current Inputs overload: 20 times the full scale value for 1 second (with overload cut-out triggered at limit values)
Number of scales: 2 voltage scales; 3 current scales.
Automatic scale change: response time 1,2 sec.; change to the upper scale occurs at 105% of the active scale; change to the lower scale occurs at 20% of the active scale.
Dimensions: L. = 157.5 mm (9 DIN modules); H. = 90 mm; D. = 73 mm
Lithium battery: 3 V; 200 mAh
Weight: 1 kg.
Protection level: instrument IP20; front panel IP40.
• Stored measurement values are saved on a EEPROM (1.000.000 write min.) ensuring 40 years of data storage even with discharged battery.
Service and testing conditions
Ambient service conditions: temperature range: from -10°C to + 60°C;
relative humidity range: from 20% to 80%.
Storage temperature: from -20 to +70 °C.
Condensation: not permitted.
Insulation: VDE 0110 group C for operating voltage 500 VAC rms.
Insulation resistance: 500 Mohm between input terminals and outer casing.
Insulation voltage between input connectors: testing at 2000 Vrms 50 Hz for 60"
Insulation voltage between each input connector and casing: test at 3000 Vrms for 60 sec.
Safety reference standards: IEC 348, VDE 411, class 1 for operating voltage 650 VAC rms; IEC 1010 550 V.
EMC reference standards: EN 50081-1, EN 50082-2, EN 55011, EN 55022.
>>>
View the product on elcontrol-energy.net
ELCONTROL
ENERGY AND HARMONICS ANALYZER - VIP96PLUS
Description
VIP96 PLUS is a panel instrument providing all the information of the base model VIP96:
Voltage (V rms), Current (A rms), P.F. CosØ, Active power (W), Reactive power (VAr), Apparent
power (VA), Frequency (Hz), Active power peaks (W) e Apparent power peaks (VA) averaged over a set integration time.
Additionally to all measures present on the base model, VIP96 PLUS offers many other functions providing more than 100 measures.
•Average values for active power (W), reactive power (Var) and apparent power (VA), claculated over a set integration time.
•Counters for active energy (kWh), reactive energy (kVArh) both in Standard Mode and Cogeneration Mode (positive and negative kWh counters, inductive and capacitive kVArh counters).
•Total Harmonic Distortion Factor (THD) of voltage and current respective to fundamental and total rms value.
•Voltage and current harmonics and CosØ value from the 1st to the 24th as absolute value and percentage of fundamental.
•Crest Factor of voltage and current as absolute value and percentage.
Such functions are very useful for a wide spectrum of applications including:
•control and optimization of consumptions and loads;
•analysis of harmonic distortion caused by non-linear loads;
•prevention of the risk of resonance between power factor correction capacitor banks and transformers;
•data acquisition on Personal Computer for the generation of graphic and numeric reports on the performance of installations and electrical machines.
Technical specifications
Power supply: from network 220 V ~ or 110 V ~ ± 10% - 50/60 Hz, consumption 4 VA
Impedance of the voltmeter inputs: > 4 Mohm
Voltmeter inputs: VL1-N up to 600 V ~ , up to 600 Hz.
Current inputs: AL1 . Consumption … VA. from external CT …/5A
Display: LCD with backlight
Measures: T.R.M.S. (true effective value)
Accuracy: 1% on voltage and current
Dimensions: 96 x 96 x 130 mm
Weight: 1 kg
Protection level: instrument IP20, front panel IP30
Operative temperature range: -10°C ÷ + 50°C
>>>
View the product on elcontrol-energy.net
ELCONTROL
MULTITARIFF ENERGY COUNTER - ED39DIN
Description
ED39din 485 is a multi-functional instrument in a 9 DIN modules casing, ideal for the measurement and display of instant, average and maximum electrical consumption.
ED39din can
record active energy consumption on up to 4 tariff bands, selected via external digital signals. The 2 digital inputs can also be used as multipurpose pulse counters to count pulses from any kind of meter (gas, water, steam etc.). All data can be read via the RS485 serial line. ED39din is equipped with a LED display with large red digits that are easily read under any lighting condition and LEDs indicating the displayed parameters.
The maximum number of displayed measures is 25 (see table).
This instrument can be connected to unbalanced threephase , twophase and singlephase systems.
Connections of supply and measurement cables are trough sturdy 2,5 mm2 terminals.
Reading and programming are performed by use of the PAG key on the front panel and the SEL, SET keys. The setup menu can be password protected.
ED39din 485 is a cost-effective instrument which can conveniently replace many traditional analog instruments in a very small space, simplifying wiring and with superior performances for both accuracy and reliability.
Accuracy of measurements is guaranteed even for highly distorted waveforms, a critical issue for traditional instruments.
Technical specifications
Max dimensions (mm): instrument: 158.5 x 73 x 90.
Power supply: from network 230 V~ or 115 V~ ± 10% @ 35 - 400 Hz (4 VA)
Display: LED 7 segments 13 mm red, 3 x 3 numeric digits on 1 line.
Voltmeter inputs: VL1, VL2, VL3, N up to 430 V~ phase-neutral, 600 V~ phase-phase, 35¸ 400 Hz.
Voltmeter inputs impedance: 2 Mohm
Voltmeter inputs overload: max 850 V~ phase-neutral
Amperometric inputs: AL1, AL2, AL3, consumption 1 VA. Three external /5A curr. trasf. necessary
Amperometric inputs overload: 7A permanent, 50A for 1 second.
Number of scales: 1 voltage scale, 2 current scales
Measurements: T.R.M.S. (true root mean square) up to the 25th harmonic (50 Hz), 20th (60Hz)
Accuracy: 1% of reading for V and I; 1% for power
Suitable for connection to: Singlephase or Threephase Star / Delta or Twophase systems
Digital Inputs: 2 digital inputs to be connected to external voltage free contacts
Max counting frequency: 25Hz minimum ON time = 20msec.
Weight: 0.6 Kg
Protection level: instrument IP20, front panel IP40
Ambient temperature range: -10°C ¸ + 60°C
Relative humidity range: from 20% to 80%.
Condensation: not permitted
>>>
View the product on elcontrol-energy.net
ELCONTROL
PANEL ENERGY ANALYSER - STAR3DIN
Energy and armonics analyzer
Description
The STAR3 din is the latest instrument available from Elcontrol Energy Net. This high quality panel energy analyser provides brillant features at a
price never reached before. The new bright LCD display, the harmonic analysis, the wide set of measured parameters including the TDH available in all the models, the multi-protocol capability of the RS485 port and the high accuracy class 0.5%, the 3 years warranty period, allow to consider the STAR3 the new state of art of the of the panel analysers market. It is a perfect, professional and low cost solution for the electrical panels, sub metering systems, OEM application
The model with harmonics allows a permanent based control of one of the most important aspect of the power supply quality. Such important possibility, up to now, was reserved only to high-cost devices. The STAR3 din breaks this price barrier bringing, for the first time, the harmonic analysis into the market of the panel analysers.
In addition to all usual measures, STAR3 din introduces many advanced features previously available only on high-cost devices.
THD% provides a clear and immediate indication of a hidden problem: harmonic pollution.
The neutral current indication gives information on the status of the neutral cable, which is often overloaded as a consequence of load unbalance and harmonics. The neutral current is a RMS value obtained with an intelligent calculation, which ensures a higher accuracy than direct measurement via a 4th CT.
Technical specifications
Maximum size (mm): instrument: 158.5 X 73 X 90. (9 DIN module)
Power supply: from network 230 V ~ or 115 V ~ ± 15% -20% @ 35 ÷ 400 Hz (4VA)
Display: LCD dispay, dot matrix
Voltmeter inputs: VL1, VL2, VL3, N up to 430 V ~ phase-neutral, 600 V ~phase-to-phase, 35 ÷ 400Hz.
Voltmeter input impedance: 2 M ohm
Voltage input overload: max 850 V phase-neutral
Amperometric inputs: AL1, AL2, AL3. Consumption 1 VA. Three external /5A curr. trasf. necessary.
Amperometric inputs overload: 7A permanent, 50A for 1 second.
Sensitivity : 20mA current ; 10V voltage
Overcurrent : withstands 50A for 1 sec.
Number of scales: 1 voltage scale, 2 current scales
Measurements: T.R.M.S. (true effective value) up to 25 th harmonic = 1250 Hz with fundamental @50 Hz
Accuracy:
>>>
View the product on elcontrol-energy.net
ELCONTROL
PANEL ENERGY ANALYSER - ENERGY MASTER
Memory module
Description
ENERGY MASTER is a device for panel or DIN-rail mounting.
Thanks to an internal RS485 connection, Energy Master is able of independently reading and the storing the
measurements of a network composed of a maximum of 128 Elcontrol Energy Net analysers.
Through an Ethernet or RS232+modem connection, it is possible to communicate with ENERGY MASTER from a remote PC allowing:
· To configure the device.
· To detect automatically the instruments connected to the network.
· To download the files related to measures and energy counters in three different ways: manually, programmed (day, hour) or automatically (due to the filling of the internal memory).
· To set up alarm-thresholds and to receive alarm-messages upon their exceeding.
· To manage the relays present on the instruments remotely.
Energy Master is able to perform measurement campaigns on a weekly basis or setting a beginning/end dates.
Technical specifications
DIMENSIONS: 190X115X90 mm
WEIGHT: 2Kg
POWER SUPPLY: 100-240VAC 50/60Hz 30VA
OPERATING SYSTEM: XP EMBEDDED
COMMUNICATION PORTS: RS485,ETHERNET,RS232 (modem)
MAXIMUM NUMBER OF INSTRUMENTS: 128
RS485 COMMUNICATION PROTOCOL: MODBUS RTU IEEE
MINIMUM TIME BETWEEN TWO READINGS: 1 second
MEMORY AVAILABLE: 200Mbyte
MEMORY:
Storing all available data:
10 Instruments, polling every 15' = 1,8 years
50 Instruments, polling every 15' = 4 months
Storing only KWh, kvarh, KW, Kvar:
10 Instruments, polling every 1' = 2,7 years
50 Instruments, polling every 1' = 6 months
POLLING MODES: “Continuous Type” with possibility to configure
the intervals between the polling cycles
“Campaign Type” with possibility to set up
beginning/end dates or on weekly basis
ALARM MESSAGES: 1 message of alarm for every instrument of
the net controlled every cycle of polling
(with continuous polling).
1 message of priority alarm for all
instruments connected to the net checked
every 2 or 4 seconds.
LEVEL OF PROTECTION: IP20
OPERATING TEMPERATURE: From 0°C to 50°C
PC SOFTWARE: PC Software to perform all the possible
actions compatible with WINDOWS XP or WINDOWS NT.
LANGUAGES: Italian, English, French, German, Spanish.
EXTERNAL MODEM: Certified by ELCONTROL ENERGY
>>>
View the product on elcontrol-energy.net
ELCONTROL
PANEL ENERGY ANALYSER - STAR3
Energy and harmonics analyzer
Description
STAR 3 is a high quality 96x96mm panel energy analyser provides brilliant features at a price never reached before. The new bright red LCD display, the
harmonic analysis, the wide set of measured parameters including the THD available in all the models, the multi-protocol capability of the RS485 port and the high accuracy class 0.5%, the 3 years-warranty period, allow to consider the STAR 3 the new state of art of the panel analysers market. It is a perfect, professional and low cost solution for the electrical panels, sub-metering systems, OEM applications, supervisory systems, Building and Factory automation systems.
The high flexibility of the instrument makes it adaptable to totally different applications. The models with harmonic analysis allows a permanent based control of one of the most important aspect of the power supply quality.
Such important possibility, up to now, was reserved only to high-cost device.
STAR 3 breaks this price barrier bringing, for the first time, the harmonic analysis into the market of the panel analysers.
Technical specifications
Maximum dimensions (mm): instrument: 96 X 96 X 115.4. Cut-out template: 91 X 91
Power supply: switching circuit from 90V to 230V ±15% AC/DC @ 35÷400 Hz (5 VA).
Display: reverse red LCD with LED backlight
Voltmeter inputs: VL1, VL2, VL3, N up to 350 V phase-neutral, 600 V phase-to-phase, 35÷400 Hz
Voltmeter input impedance: 2 Mohm
Voltage input overload: max 850 V phase-neutral
Current inputs: AL1, AL2, AL3, COM., consumption 1 VA. Three or two 5A external curr.transf. required
Measuring range: 0-120% In
Sensitivity: current 20 mA ; voltage 10 mV
Overcurrent: withstand 50 amps for 1 sec.
Number of scales: 1 voltage scale, 2 current scales
Measurements: True R.M.S. up to25th harmonic = 1250Hz with fundamental @50 Hz
Sampling frequency: 2.5 kHz.
Accuracy:
>>>
View the product on elcontrol-energy.net
ELCONTROL
