Accessoires pour portes (translation in progress): suppliers, wholesalers and manufacturers on Hellopro
Search   


Accessoires pour portes (translation in progress) :

65 products
Select the category
    Selection of 41 products among 65
    DOOR CLOSING SYSTEM ATC ESTETIC 2D

    DOOR CLOSING SYSTEM ATC ESTETIC 2D
    The Estetic 2D closing system is part of a set which includes two further adjustable hinges. This is an innovative system offering a combination of aesthetic appeal and functionality. The system is extremely quick and easy to install. Material UNI CB FF KD Welding test: welded on bolt is bent by 20° base plate is subjected to a 36 Nm torque Surface treatment: double zinc plated and yellow chromate min. 9 microns Zinc min. 9 micron Salt spray test: zinc plate min 280 hours to DIN 50021 plastic coating additional 1000 hours 100.000 cycle continuous test: 60 Kg per set >>>
    View the product on sfsintec.biz/fr SFS intec
    DOOR CLOSING SYSTEM LEFT ATC-15-006

    DOOR CLOSING SYSTEM LEFT ATC-15-006
    Easy-to-fit door closing system for low-profile installations and fireproof doors The ATC-15-006 closing system is part of a set which includes two further adjustable hinges. This is an innovative system offering a combination of aesthetic appeal and functionality. The system is extremely quick and easy to install. Material UNI CB FF KD / Uni C10 PB Welding test: Base plate is subjected to a torque of 36 Nm Surface treatment: double zinc plated and yellow chromate. Min. 9 microns 100.000 cycle continuous test Load bearing: 60 Kg per set >>>
    View the product on sfsintec.biz/fr SFS intec
    ELECTRONIC SAFETY SWING GATES WITH SINGLE LEAF LENGTH OF 1.8

    ELECTRONIC SAFETY SWING GATES WITH SINGLE LEAF LENGTH OF 1.8
    The latest generation of swing gate motors from FAAC The 413 is an energy efficient motor which is highly adjustable to allow maximum flexibility in installation dimensions. There are 4 versions available. The LS versions are equipped with open and closed limit switches to ensure the gate opens whatever the weather. All versions have a built in opening and closing mechanical stop. There are several different versions of the operator, some with limit switches and some without allowing you to choose the most suitable for your requirements. >>>
    View the product on faac.co.uk FAAC (UK) Ltd
    GUIDE LOCKS BELL

    GUIDE LOCKS BELL
    • All sharp edges are chamfered. • Self-locking screws are included. • Will not seize under thermal expansion • Provides positive, accurate alignment • Special sizes made to your requirements • Parts are machined symmetrically to the centerline • Male Guide Lock * Manufactured from Graphite O-6 Steel * Hardened to 60-62 Rc * Black Oxide Finish * Grease Grooves • Female Guide Lock * Manufactured from 8620 Steel * Hardened to 54-56 Rc * Armor-Dense Chome Plating 70-72 Rc providing excellent wear resistance >>>
    View the product on choicemold.com Choice Mold Components
    ECONOMY RANGE - NON ISOLATED SYSTEM

    ECONOMY RANGE - NON ISOLATED SYSTEM
    Basic door entry system available in sizes 6, 12, 18, 24 & 30 ways with individual expander boards for the number of flats and use the EA1 or EA2 Handsets. EA1-Telephone Handset with large soft touch lock release button and Green Door Open LED EA2- Telephone Handset with large soft touch lock release button, Privacy switch with Red LED and Green Door Open LED Controllers housed in sheet steel enclosure and pre-wired for 6,12,18,24 or 30 way system >>>
    View the product on entrotec.co.uk Entrotec Ltd
    INDUSTRIAL ENGINE OF DOORS : TECH -ROLL 1800

    INDUSTRIAL ENGINE OF DOORS : TECH -ROLL 1800
    The electric operator (IGH) is a heavy-duty industrial motor with a mechanical brake. The operator is of sufficient power to operate the door at speeds of 305 mm to 610 mm (12 - 24 in) per second. The operator is coupled to a heavy-duty industrial reducer with gears bathed in oil. It is designed for continual use and ease of maintenance. * The operator is equipped with a torque limiter. * The operator is equipped with a hand chain and electric disconnects for manual operation during electrical shutdowns. * A limit switch is mounted directly on the operator. * The electric panel is CSA approved and will meet all local and architectural norms as specified It will have quality reverser /starters, a cycle counter and three push buttons on the panel front. >>>
    View the product on indotech.org Indotech
    BATTERY OPERATED LOCK - BIO-LOCK 1000

    BATTERY OPERATED LOCK - BIO-LOCK 1000
    The BioLock 1000 is a user-friendly biometrically accessible deadbolt door lock system to be applied to external and/or internal doors for residential and small commercial applications. The technology is a revolution in biometric deadbolt locks, from its sleek and subtle design to its operation in a wide range of environments; the BioLock is the new standard. As a complete system, the BioLock offers a powered deadbolt that is activated by swiping a valid fingerprint. The BioLock can be easily installed on most standard doors. >>>
    View the product on renewablesgb.com Renewables GB
    HANDLE 4591 PADDLE

    HANDLE 4591 PADDLE
    Designed for simple push or pull operation as an alternative to a lever handle, for use with the 4700 series deadlatch (except 4750) and the MS+1890 Latch/Deadlock. Dogging comes as standard on all versions. NOTE: When used on timber doors, a mounting plate must be used. The push version of the 4591, when used on the 4710 and 4720 Series Deadlatch and used in conjunction with the 8460 ramped strike series or the electric strike versions 7108 and 7128, conforms to BS EN 179: 1998+A1: 2001 EC Certificate of Conformity number 1121-CPD-AB0011. >>>
    View the product on adamsrite.co.uk Adams Rite Europe Ltd
    AUTOMATIC DOOR OPENER / CLOSER FOR USE WITH AUTO-SEAL II DOOR

    AUTOMATIC DOOR OPENER / CLOSER FOR USE WITH AUTO-SEAL II DOOR
    The Automatic Door Opener/Closer (AOC) is the newest shielding feature designed to aid the technician in patient movement into and out of the MRI suite. Key FeaturesAutomatic operation can be linked to keypad entry Convenient Push Button Activation Easy access Optional timed program for automatic closure Reliable performance Safe operation Single or double door configuration DescriptionThe Automatic Door Opener/Closer (AOC) provides easy access into the MRI with adjustable timing on the opening and closing operation. Fast, smooth operation enables the technician to concentrate on the needs of the patient. The door operation can also be configured to operate with a customer-supplied card reader* that would work with existing security operations within the facility. Use of the AOC can extend the life and maintenance intervals on the door. Designed for reliable, high traffic operation, the AOC still allows manual operation in the event of a power loss or an emergency situation. The advanced microprocessor controller and sensor system ensures safe operation at all times and eliminates the need for moving parts. Applications:Currently designed for use on the ETS-Lindgren Auto-Seal® II Door, the AOC was designed with intra-operative MRI in mind, however it is a convenient and beneficial feature for any MRI suite. Reducing and/or eliminating manual operation prevents damage from excessive use which can vary depending upon the person Tailor the door to operate to your desire:With the push of a button you can preset the door to automatically close after a predetermined time Have the door remain open indefinitely until closed by you Close with the push of a button Performance: Installation and setup includes monitoring door position and adjusting the speed at the beginning and end of the arc for smooth starts and stops. Surface mounted unit can be added to the door after the door is installed*, allowing fast and easy upgrade to existing doors that are designed to accept the AOC. Easily manages door operation for doors weighing 350 lbs (160kg). Warranty: Warranties cover parts and labor for one year. Extended warranties from one to five years and maintenance agreements are available. >>>
    View the product on ets-lindgren.co.uk Ets Lindgren
    IRREVERSIBLE OPERATOR FOR UP-AND-OVER GARAGE DOOR- ECOPESI S

    IRREVERSIBLE OPERATOR FOR UP-AND-OVER GARAGE DOOR- ECOPESI S
    The ECOPESI-S actuator boasts no less than 20 years of tried-and-tested experience in the operation of counterbalanced doors. This powerful model is designed to give many years of reliable service. With its irreversible mechanics and powerful reducer group keeping the door securely closed (practically impossible to force open), ECOPESI-S is an excellent anti-intrusion system. To open the door in the event of power failure, simply operate the lever on the motor. If locked outside, turn the handle (previously connected to the ECOPESI-S release device to open. The adjustable limit switches determine the exact opening and closing positions of the door. >>>
    View the product on ribind.it RIB Groupe - RIB
    FAAC 412 24V IS A PRACTICAL AND ECONOMICAL CHOICE FOR RESIDE

    FAAC 412 24V IS A PRACTICAL AND ECONOMICAL CHOICE FOR RESIDE
    The FAAC 412 24V is a practical and economical choice for residential gates up to 1.8 metres in length per leaf. The 412 24V actuator is non-reversing, therefore it is self locking in open and closed positions. Quick and easy to install Quick and easy to install, no need for expensive modifications to the existing load bearing structure. Use of electro-mechanical technology makes the FAAC 412 24V ideal for light duty applications. >>>
    View the product on faac.co.uk FAAC (UK) Ltd
    TOP LOCKS - EXTERNAL BELL

    TOP LOCKS - EXTERNAL BELL
    • All sharp edges are chamfered. • Self-locking screws are included. • Will not seize under thermal expansion • Provides positive, accurate alignment • Special sizes made to your requirements • Parts are machined symmetrically to the centerline • Male Guide Lock * Manufactured from Graphite O-6 Steel * Hardened to 60-62 Rc * Black Oxide Finish • Female Guide Lock * Manufactured from 8620 Steel * Hardened to 54-56 Rc * Armor-Dense Chome Plating 70-72 Rc providing excellent wear resistance * Notched for easy removal >>>
    View the product on choicemold.com Choice Mold Components
    INDUSTRIAL ENGINE OF DOORS : TECH -ROLL 6000

    INDUSTRIAL ENGINE OF DOORS : TECH -ROLL 6000
    The electric operator (UIGH) is a heavy-duty industrial brake motor. The operator is of sufficient power to operate the door at speeds of 815 mm to 1525 turn (32 - 60 in) per second. The operator is coupled to a heavy-duty industrial reducer with gears bathed in oil. It is designed for high-speed continual use and ease of maintenance. * The operator is equipped with our patented safety clutch system. * The operator is equipped with a hand chain and electric disconnects for manual operation during electrical shutdowns. * A limit switch is attached directly to the main shaft for better control performance. * The electric panel is CSA approved and will meet all local and architectural norms as specified. It will have quality reverser / starters, a cycle counter and three push buttons on the panel front. This door can be equipped with INDOTECH's patented Tech-Command - Our Programmable Logic Controller and Communicator. It has a menu driven screen and can be programmed by anyone. And is specifically designed for our Roll-Tech and Alu - Tech doors. >>>
    View the product on indotech.org Indotech
    BATTERY OPERATED LOCK - BIO-LOCK 7000

    BATTERY OPERATED LOCK - BIO-LOCK 7000
    The B-7000 is a "state of the art " AA battery operated lock. This Chrome with brass accent lock is a stainless steel fingerprint door handle that holds 120 fingerprint users. This lock has a coating so it will never fade, rust or discolour.The B-7000 is the most durable and elegant lock on the market today offering a built in dead bolt and user management functions. The B-7000 features a 5-latch DIN ANSI mortise for added security. Designed for both Residential and Commercial uses alike, this lock is one of the most popular battery operated units as it is elegant, robust, and secure at an affordable price. NO pin numbers to enter just place your finger on the scanner, the infrared detector will be activated granting you access to your secured area. >>>
    View the product on renewablesgb.com Renewables GB
    PAIR OF ECOS MITRED LEVER 1887SS

    PAIR OF ECOS MITRED LEVER 1887SS
    The ECOS products are all about delivering stylish accessories at a fantastic price. From 20th October 2007 this product will be part of our CORE RANGE availale on a NEXT DAY DELIVERY for £8.95 all other products will be delivered within 5 working days so if you are in a rush be sure to select all of your items from our core range. As with all Charles Mason products this range is offered with a 25 year mechanical guarantee and three month return policy on samples. Our ECOS Mitred Lever features a clip on rose giving concealed fixings. It is made from 304 grade stainless steel and is suitable for interior use. (Use exterior grade Mitre Handle 1015SS to match on exterior doors.) The Mitred Lever has an internal spring and may be used with 76mm super tubular latch (1883) or box latch (1082/1083) or lock. These should be pierced to accept the bolt through fixing screws that are supplied with the handles. When comparing prices don't forget ours include VAT and you will get 10% off ALL orders over £250. The Mitred Lever is priced as low as £5.32 ex VAT. Order today while stocks last. >>>
    View the product on charles-mason.co.uk Charles Mason Ltd


    12Suivant >>Fin >
    Go to page


      Search    
     
     
     
    Search
    See all of the sector's products : Building - Public works