Accessoires machines-outils (translation in progress) - All suppliers - Accessoires machines-outils - Machine tools - Manufacturing and processes -
Search   


Accessoires machines-outils (translation in progress) :

33 products Flux RSS
BAS-V 250

BAS-V 250

One axis CNC rotary table + 2nd axis manual inclination from -10° up to 110° by means of a graduated handwheel Table diameter: Ø 248 Center bore diameter: Ø 72 through bore Tee slots dimension: 4X11.7 Rotating axis clamp torque: 600 Nm Tilting axis clamp torque (manual): 1000 Nm Max working torque: 254 Nm Max rotation speed: 6000° min Min. indexing unit: 0.001° Indexing accuracy: ±15" Repeatability: ±10" Max. thrust "G" direction KG.: 600 Max. thrust "F" direction L=250 mm Kg.: 200 Tilt: -10° ÷ 100° "A" dimension: 494 mm "B" dimension: 260 mm "C" dimension: 180 mm "D" dimension: 282.2 mm E" dimension: 377 mm >>>
View the product on lcmitalia.it L.C.M.
CNC MACHINE MODEL NCRT

CNC MACHINE MODEL NCRT

Pplication: • For CNC machining centres with automatic toolchanger (bore cycle G85) Features: • Smooth ball drive up to 3500 RPM • Self-feed (tension/compression) • Accurate thread depths • Straight shank with flat to DIN 1835B+E • Variable orientation device nstallation on the machine NCRT attachments are supplied with a stop arm for installation on the machine. This stop arm can be shortened to the correct distance required. It is easier to use the special accessories shown below. You can order torque bar holder assemblies or stop arms to suit your machines. >>>
View the product on tapmatic.ch TAPMATIC
ROBOTIC TOOL CHANGER - QC-11

ROBOTIC TOOL CHANGER - QC-11

Product Advantages Lightweight and small size with a high-strength locking mechanism. No-Touch locking technology allows up to 0.12 inch (3.0 mm) plate separation when locking. Patented fail-safe locking mechanism design results in low force acting on the piston. Large piston diameter and outward ball travel increase moment capacity. All locking parts are made of Rc58 stainless steel. Long-life bushings for pneumatic pass-through. >>>
View the product on ati-ia.com ATI Industrial Automation
CONTROL SYSTEM UPGRADES

CONTROL SYSTEM UPGRADES

Many factories and sites have existing equipment and systems that has provided a good service for a number of years. It often proves more economically attractive to upgrade this to modern standards as opposed to the full capital cost for a complete replacement. Factair has considerable experience in evaluating existing systems and re-designing them to modern standards, incorporating upgrades and improvements to meet current and future needs. The following are examples of contracts undertaken. >>>
View the product on factair.co.uk Factair
HIMATRIX SYSTEMS

HIMATRIX SYSTEMS

The safety-related controllers and remote I/O modules of the HIMatrix series were developed especially for distributed and time-critical automation concepts. The combination of the world’s fastest safety controller and the fastest safety bus, safeethernet, forms the basis for a range of efficient HIMatrix solutions The system's performance, compactness and ease-of-assembly enable solutions, which were previously performed using relay technology, to now be set up economically, reliably and much more flexibly using control technology. Safety-related networking on the basis of safeethernet offers considerable performance and flexibility advantages over solutions using conventional safety controllers and buses. Combined with our wide range of hardware, this means that our systems can be adapted perfectly to any kind of application - thus creating more efficient solutions. HIMatrix - the Highlights: * Certified up to SIL 3 and cat. 4 * Response time ? 20 ms * Cycle time for a 1K program: approx. 0.02 ms * Safety-related networking at 100 MBit/s on standard Ethernet * Utilises all Ethernet functions for safety-critical applications * Integrated switch for a range of network topologies (line, tree, star) and ring structures * Communication via safeethernet, PROFIBUS-DP Master & Slave, OPC, MODBUS RTU and TCP Master & Slave, Send & Receive TCP, EtherNet/IP, INTERBUS Master, CUT * For use in Ex-Zone 2 * Drag&Drop programming using ELOP II Factory * Certified functional blocks * Certified to: IEC 61508, IEC 61131, IEC 61511, EN 50156, EN 954, EN 54, NFPA, NFPA 72, ATEX >>>
View the product on hima.com HIMA
CENTERING VICES RKZ 125

CENTERING VICES RKZ 125

For fastidious tasks The main features of the new Röhm self-centering vice RKZ are its mechanical transmission via knee lever and its constant force for each clamping process, which is ensured by the increased repeating accuracy. Stable basic body made of steel, all-round hardened and polished - high, safe clamping force All guides are hardened and polished Standardly equipped with stepped top jaws Large clamping stroke, 50 mm per jaw >>>
View the product on roehm-spannzeuge.com Roehm
PANELPRO 38MM TRACKBALL

PANELPRO 38MM TRACKBALL

The PanelPro range of Trackball products is a high-precision family of pointing devices. A self-adjusting seal around the ball affords the unit an IP65/NEMA 4 rating to limit the ingress of beverage spillages fibres and other contaminants. The stainless steel bezel has an additional protective coating to protect against porosity and scratches. A 3mm stainless steel shock transmission plate is optionally fitted to the underside of PanelProAV products to give impact resistance up to 10Joules. PanelPro and PanelProAV are the only pointing device families to combine all of the connection formats (protocols) used in modern computer systems into a single unit. Units are capable of phase quadrature, USB, PS/2, Microsoft, Sun and Mouse Systems formats. This allows a single unit to operate with virtually any computer system. Five buttons are available when using the extended functionality of USB and PS/2 formats. This feature is fully supported by resident mouse drivers in Windows ME, 2000, XP and later. All buttons may be configured for a number of different purposes when used with these drivers. This is particularly useful in internet enabled applications since buttons 4 + 5 may be used as ‘next’ and ‘previous’ buttons, for example. The PanelProAV range is available with either the rectangular (6-hole) or square (4-hole) mounting configurations. All units are available with a choice of connector format to match de facto industry standards. Additionally, the left, middle and right buttons may be configured for latching functions. The latches may be programmed using a DIP Switch. >>>
View the product on ebe-gmbh.de EBE Groupe - EBE Group
MD 110

MD 110

Tilting head for milling ( ± 92°) fitted for electrospindle with max capacity of 24 KW "S1". Heavy-Block® hydraulic clamping system. Indexing accuracies monitored by in axis encoder. Rotation max speed: 9.000/18.000 °/min Max torque of axis at work: 680 Nm Clamping torque: 1.450 Nm Angle repeatability by laser compensation: ± 3" Indexing accuracy by laser compensation: ± 2" Min. indexing unit: 0,001° Taper: ISO 40/HSK A63 Rotation max speed of electrospindle: 15.000 RPM/24.000 RPM Electrospindle max capacity: 14 Kw / 24 Kw Torque S1 (100%): 38 ÷ 78 Nm Type of lubrication: Grease/Air-oil >>>
View the product on lcmitalia.it L.C.M.
CNC MACHINE MODEL RDT

CNC MACHINE MODEL RDT

Application: • For CNC machining centres with automatic toolchanger (bore cycle G85) Features: • Smooth ball drive up to 6000 RPM • Self-feed (tension) • Accurate thread depths • Steel collets ER • Straight shank with flat to DIN 1835B+E • Interchangeable stop arm assembly for different centre distances Stop arm assemblies: Please order separately the suitable stop arm assembly for the required centre distance (distance L3 = spindle centre – torque bar holder). >>>
View the product on tapmatic.ch TAPMATIC
ROBOTIC TOOL CHANGER - QC-20

ROBOTIC TOOL CHANGER - QC-20

Product Advantages Large number of pass-through air ports. No-Touch locking technology allows up to 0.12 inch (3.0 mm) plate separation when locking. Patented fail-safe locking mechanism design results in low force acting on the piston. Large piston diameter and outward ball travel increase moment capacity. All locking parts made of Rc58 stainless steel. Long-life bushings for pneumatic pass-through. >>>
View the product on ati-ia.com ATI Industrial Automation
Go to page


  Search    
 
 
 
Search
See all of the sector's products : Manufacturing and processes