Accessoires de paratonnerre (translation in progress) :
6 products
LABJACK U3 USB FLEXIBLE DAQ UNIT
LabJack U3 USB Flexible DAQ Unit
Description
A versatile low-cost USB multifunction data acquisition and control device. Has flexible inputs which can be configured for any mix and analogue
inputs, and digital inputs/outputs. Supplied with a wide range of FREE Data logging software and examples for use with most programming and DAQ packages.
Two versions now available - LV Low Voltage, similar to the previous U3 and the HV High Voltage which has 4 x 10/20V input ranges.
U3-LV
16 Flexible I/O (Digital Input, Digital Output, or Analogue Input)
Up to 2 Timers (Pulse Counting/Timing, PWM Output, Quadrature Input)
Up to 2 Counters (32-Bits Each)
4 Additional Digital I/O
12-bit Analogue Inputs (0-2.4 V or 0-3.6 V, SE or Diff.)
2 Analogue Outputs (10-Bit, 0-5 volts)
Supports SPI, I2C, and Asynchronous Serial Protocols (Master Only)
Maximum Input Stream Rate of 2.5-50 kHz (Depending on Resolution)
Capable of Command/Response Times Less Than 1ms
Built-In Screw Terminals for Some Signals
USB 2.0/1.1 Full Speed Interface
Powered by USB Cable
Drivers Available for Windows, Linux, Mac and Pocket PC
Examples available for C/C++, VB, LabVIEW, Java, etc
Includes Licensed Copy of DAQFactory Express Software (Win2000/XP)
Includes USB Cable and Screwdriver
Enclosure Size Approximately 75mm x 115mm x 30mm
Rated for Industrial Temperature Range (-40 to +85 Degrees C)
U3-HV Differences
First 4 Flexible I/O are Changed to Dedicated HV Analogue Inputs.
4 HV Inputs have ±10 Volt or -10/+20 Volt Range.
12 LV Inputs (Flexible I/O) Still Available, for 16 Total Analogue Inputs.
>>>
View the product on audon.co.uk
Audon Electronics
MYPCLAB USB UNIVERSAL INPUT DAQ
MyPCLab USB Universal Input DAQ
Description
myPCLab is a very compact Data Acquisition tool which connects to a PC via a USB port and monitors two universal analogue inputs, accepting
thermocouples, Pt100, Voltages and 4-20mA current loops along with one digital input. It comes with an intuitive and easy-to-use Windows software which plots and records data, shows gauges, bargraphs and digital readouts. The USB port is accessed as a virtual serial port which makes myPCLab compatible with ANY SCADA software with Modbus RTU driver or with any program with ASCII serial communication. Multiple units of myPCLab can be connected to the same computer.
Dual universal type analogue inputs.
One digital input.
Internal temperature sensor for cold junction compensation or room temperature monitoring.
Programmable analogue inputs: Thermocouples type J, K, T, E, N, R, S and B, Pt100 RTD (3-wire), 4-20mA, 0-50 mVdc or 0-10 Vdc.
Accuracy: 0.2% of full scale for Pt100, current and voltage; 0.25% of FS ±3°C for thermocouples type R,S and B; 0.25% ±1°C for all other thermocouples; 1.5ºC for internal temperature sensor.
Sampling rate: 8 to 128 samples per second, depending on the A/D resolution.
A/D resolution: programmable from 15 to 11 bits, depending on the sampling rate.
Automatic cold juction compensation for thermocouples.
Digital input for dry contact or voltage level.
Computer interface: USB V1.1 Plug and Play,
Virtual Serial Port driver.
Double communication protocol: ASCII & Modbus RTU.
Powered by the USB bus. Consumption:
>>>
View the product on audon.co.uk
Audon Electronics
USB-AD USB 16 CHANNEL DAQ UNIT
USB-AD USB 16 Channel DAQ Unit
Description
The USB-AD is a low cost USB based multifunction I/O unit with 16 analogue inputs, 1 analogue output, 4 digital inputs and 4 digital outputs. Data can be
acquired at up to 500Hz rate at 12-bit resolution. A range of analogue and digital expansion boards are also available. Supplied with a copy of NextView4-Live software for data acquisition and control and a wide selection of Windows, MAC and Linux programming examples.
16 single ended analogue inputs
±5V input range with 12-bit resolution
single ±5V 12-bit analogue output
4 x 5V digital inputs
4 x 5V digital outputs
USB 1.1 or 2.0 compatible
All I/O connected via 37-way D-type socket
Small 37-way D-type connector shell housing
Windows 2000/XP/Vista, MAC, Linux drivers
Supplied with a free copy of NextView 4 Live
Supplied with programming examples in VB, C++ Delphi, .NET
Can be used with LabVIEW and Profilab Graphical Programming Software
Description
The USB-AD is a low cost USB based multifunction I/O unit with 16 analogue inputs, 1 analogue output, 4 digital inputs and 4 digital outputs. Data can be acquired at up to 500Hz rate at 12-bit resolution. All I/O are presented to a 37-way D-type socket. The user can connect to this directly or optional expansion boards are available. For use with USB 1.1 and 2.0 systems, up to 127 units can be connected to a single PC.
Drivers are available for Windows, MAC and Linux operating systems. The USB-AD is supplied with an Active-X component and comprehensive programming examples for use with most common programming languages. There are also VI for use with LabVIEW and there is a USB-AD component ion the ProfiLab programming package.
The USB-AD is also supplied with a copy of nextView4-Live data acquisition and control software. With NextView-Live, the user can acquire and analyse data, set analogue and digital outputs and read the status of the digital inputs. The user can create their own screens, with chart displays, text, alarm panels, output sliders etc.
NOTE - The Live version of NextView does not allow acquired data to be saved to disk for analysis later or exported to Excel. When the program is closed, all acquired data is lost. Please see other versions of NextView for this functionality. Also see the RealView software for a chart recorder package that can export data to Excel for analysis.
>>>
View the product on audon.co.uk
Audon Electronics
